Studying the biomechanical effects of zirconia implant geometry and bone quality on the bone-implant interface using finite element analysis

Abstract

The success of dental implants is influenced by several biomechanical factors such as implant design, bone quality, length of the implant, and the load transferred to the implant. The present studyaimsto determine the effects of bone quality, implant length, and bone type on stress/strain distribution in bone and implant for a zirconia implant. The study was performed using the three dimensional finite element analysis and four different lengths, two types of implants, and four different bone qualities. The Elastic modulus of a cancellous bone was varied to represent the four different bone qualities. A load of 100 N was applied at the center of the abutment. The result of this current work shows that a bone is subjected to the maximum equivalent stress and strain when the cancellous bone density decreased. The screw type implant induced lesser strain than the cylinder type load. The study also confirms that longer implants produced lesser stain than shorter implants, and type I, and II bones induced lesser stresses than type III, and IV bones. The importance of bone quality has been confirmed from this study, and zirconia dental implants have induced lesser stresses.