A Buck-Boost Converter; Design, Analysis and Implementation Suggested for Renewable Energy Systems

Abstract

This work introduces a new non-isolated buck-boost DC-DC converter. Interleaved configuration of the suggested structure increases the voltage conversion ratio. The voltage rate of the suggested converter can be stepped-up and stepped down for lower values of duty-cycle, which causes to decrease in the conduction losses of the system. The voltage conversion ratio of the recommended structure is provided with low maximum voltage throughout the semiconductor elements. Additionally, utilizing only one power switch facilitates converter control. Using a single power MOSFET with small conducting resistance, RDS-ON, increases the overall efficiency of the recommended topology. To verify the performance of the presented converter, technical description, mathematical survey, and comparison investigation with similar structures are provided in the literature. Finally, a laboratory scheme with a 100W load power rate at 50 kHz switching frequency is carried out to demonstrate the effectiveness of the proposed converter.