Numerical simulation of the nickel alloy microstructure formed in the process of hot fogging

Abstract

The paper presents a comprehensive analysis of the deformation and thermal states of the Waspaloy alloy billet heated to different initial temperatures of 1100°C and 1150°C and subjected to free upsetting to an average diameter of ~1060 mm at the deformation rate of 100 mm/s. The thermodynamic forces acting on the billet trigger the process of dynamic recrystallization, which is associated with the appearance and growth of low-defect nuclei of new grains instead of the deformed ones. To describe the material microstructure evolution, the phenomenological approach implemented in the DEFORM-2D/3D software package was applied. The simulation was based on the modified Johnson - Mehl - Avrami - Kolmogorov (JMAK) model, whose equations allow calculating the volume fraction of recrystallized material and describing the grain structure transformation of metal alloys. The results of solution of the non-stationary temperature problem are used to construct the temperature fields in the Waspaloy alloy billet during its transportation through air from the furnace to the deforming equipment within 45 seconds and during the subsequent upsetting process. For the latter, the force and strain characteristics, including the force required to complete this process, are determined in the framework of the plastic flow theory, and the characteristics of the grain structure of the nickel alloy, such as the average size of recrystallized grains and their volume fraction, are determined in the framework of the JMAK model. The results obtained by numerical simulation make it possible to substantiate an optimal selection of parameters of billet deformation ensuring the formation of the required material structure.