Simulation of anchor chain based on lumped mass method

IF 3.2 3区 工程技术 Q2 MECHANICS Theoretical and Applied Mechanics Letters Pub Date : 2023-07-01 DOI:10.1016/j.taml.2023.100460
Xiaobin Jiang, Jian Gan, Shiyang Teng
{"title":"Simulation of anchor chain based on lumped mass method","authors":"Xiaobin Jiang,&nbsp;Jian Gan,&nbsp;Shiyang Teng","doi":"10.1016/j.taml.2023.100460","DOIUrl":null,"url":null,"abstract":"<div><p>In order to develop a anchoring operation simulation system and improve safety during anchoring operations, a relatively accurate mathematical model of anchoring operations needs to be established. In this paper, the stress condition of anchor chain under environmental and subsea geological conditions is further studied and the stress condition of anchor chain is analyzed based on the previous research. In this paper, a quasi-static model based on catenary method is used as the basis of dynamic analysis, and the dynamic model of anchor chain is established based on the concentrated mass method, which fully considers the influence of anchor chain weight, hydrodynamic force, ocean current and interaction with the seabed. The fourth-order Runge Kutta method was used to solve the model numerically, and a calculation procedure was developed. The accuracy of the model was verified by comparing the calculated results with the experimental results, indicating that the constructed anchor chain dynamics model has a high accuracy.</p></div>","PeriodicalId":46902,"journal":{"name":"Theoretical and Applied Mechanics Letters","volume":null,"pages":null},"PeriodicalIF":3.2000,"publicationDate":"2023-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Theoretical and Applied Mechanics Letters","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2095034923000314","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 1

Abstract

In order to develop a anchoring operation simulation system and improve safety during anchoring operations, a relatively accurate mathematical model of anchoring operations needs to be established. In this paper, the stress condition of anchor chain under environmental and subsea geological conditions is further studied and the stress condition of anchor chain is analyzed based on the previous research. In this paper, a quasi-static model based on catenary method is used as the basis of dynamic analysis, and the dynamic model of anchor chain is established based on the concentrated mass method, which fully considers the influence of anchor chain weight, hydrodynamic force, ocean current and interaction with the seabed. The fourth-order Runge Kutta method was used to solve the model numerically, and a calculation procedure was developed. The accuracy of the model was verified by comparing the calculated results with the experimental results, indicating that the constructed anchor chain dynamics model has a high accuracy.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于集中质量法的锚链仿真
为了开发锚固作业仿真系统,提高锚固作业的安全性,需要建立相对准确的锚固作业数学模型。本文在前人研究的基础上,进一步研究了环境和海底地质条件下锚链的受力状况,并对锚链的受力状况进行了分析。本文采用基于悬链线法的准静态模型作为动力分析的基础,基于集中质量法建立锚链动力模型,充分考虑锚链重量、水动力、洋流及与海底相互作用的影响。采用四阶龙格库塔法对模型进行了数值求解,并建立了计算程序。将计算结果与实验结果进行对比,验证了模型的准确性,表明所构建的锚链动力学模型具有较高的准确性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
6.20
自引率
2.90%
发文量
545
审稿时长
12 weeks
期刊介绍: An international journal devoted to rapid communications on novel and original research in the field of mechanics. TAML aims at publishing novel, cutting edge researches in theoretical, computational, and experimental mechanics. The journal provides fast publication of letter-sized articles and invited reviews within 3 months. We emphasize highlighting advances in science, engineering, and technology with originality and rapidity. Contributions include, but are not limited to, a variety of topics such as: • Aerospace and Aeronautical Engineering • Coastal and Ocean Engineering • Environment and Energy Engineering • Material and Structure Engineering • Biomedical Engineering • Mechanical and Transportation Engineering • Civil and Hydraulic Engineering Theoretical and Applied Mechanics Letters (TAML) was launched in 2011 and sponsored by Institute of Mechanics, Chinese Academy of Sciences (IMCAS) and The Chinese Society of Theoretical and Applied Mechanics (CSTAM). It is the official publication the Beijing International Center for Theoretical and Applied Mechanics (BICTAM).
期刊最新文献
A New Cyclic Cohesive Zone Model for Fatigue Damage Analysis of Welded Vessel Numerical Study of Flow and Thermal Characteristics of Pulsed Impinging Jet on a Dimpled Surface Constrained re-calibration of two-equation Reynolds-averaged Navier–Stokes models Magnetically-actuated Intracorporeal Biopsy Robot Based on Kresling Origami A New Strain-Based Pentagonal Membrane Finite Element for Solid Mechanics Problems
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1