{"title":"Sliding Pressure Inventory Control of a Supercritical CO2 cycle for Concentrated Solar Power- Analysis and Implications","authors":"Lakshminarayanan Seshadri, Pramod Kumar","doi":"10.1115/1.4063183","DOIUrl":null,"url":null,"abstract":"\n This paper presents the use of Sliding Pressure Inventory Control (SPIC) for a 10 MW supercritical Carbon dioxide Brayton cycle for Concentrated Solar Power, incorporating Printed Circuit Heat Exchangers. Load regulation using SPIC for three representative ambient conditions 45 °C, 30 °C, and 15 °C are considered. While a wide operating range from 10 MW to less than 1 MW part load is obtained, a notable cycle efficiency decline at part load is also seen. Irreversibility analysis reveals that deterioration in recuperator and turbomachinery performance are primarily responsible for cycle performance degradation at part load. Nevertheless, useful inferences are obtained from the 10 MW SPIC irreversibility study. With a slightly increased value of heat exchanger length, a non-condensing 1 MW sub-critical CO2 cycle operating between 35 bar/53 bar is found to be as efficient as a 1 MW supercritical CO2 cycle operating between 88 bar/210 bar. The major benefit of choosing the sub-critical CO2 cycle for 1 MW scale applications is the significantly reduced turbomachinery speed (~26,000 rpm) in comparison with supercritical CO2 turbomachinery (~67,000 rpm) for the same power scale. These advantages are found to be true for air-based ideal gas cycles operating between 35 bar/53 bar too, with the latter requiring nominally smaller heat exchangers than the sub-critical CO2 cycle. The final choice of working fluid, however, for these low pressure cycles would depend on practical considerations, such as material compatibilities at high temperatures, corrosion considerations, and cost.","PeriodicalId":17124,"journal":{"name":"Journal of Solar Energy Engineering-transactions of The Asme","volume":" ","pages":""},"PeriodicalIF":2.1000,"publicationDate":"2023-08-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Solar Energy Engineering-transactions of The Asme","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1115/1.4063183","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
引用次数: 0
Abstract
This paper presents the use of Sliding Pressure Inventory Control (SPIC) for a 10 MW supercritical Carbon dioxide Brayton cycle for Concentrated Solar Power, incorporating Printed Circuit Heat Exchangers. Load regulation using SPIC for three representative ambient conditions 45 °C, 30 °C, and 15 °C are considered. While a wide operating range from 10 MW to less than 1 MW part load is obtained, a notable cycle efficiency decline at part load is also seen. Irreversibility analysis reveals that deterioration in recuperator and turbomachinery performance are primarily responsible for cycle performance degradation at part load. Nevertheless, useful inferences are obtained from the 10 MW SPIC irreversibility study. With a slightly increased value of heat exchanger length, a non-condensing 1 MW sub-critical CO2 cycle operating between 35 bar/53 bar is found to be as efficient as a 1 MW supercritical CO2 cycle operating between 88 bar/210 bar. The major benefit of choosing the sub-critical CO2 cycle for 1 MW scale applications is the significantly reduced turbomachinery speed (~26,000 rpm) in comparison with supercritical CO2 turbomachinery (~67,000 rpm) for the same power scale. These advantages are found to be true for air-based ideal gas cycles operating between 35 bar/53 bar too, with the latter requiring nominally smaller heat exchangers than the sub-critical CO2 cycle. The final choice of working fluid, however, for these low pressure cycles would depend on practical considerations, such as material compatibilities at high temperatures, corrosion considerations, and cost.
期刊介绍:
The Journal of Solar Energy Engineering - Including Wind Energy and Building Energy Conservation - publishes research papers that contain original work of permanent interest in all areas of solar energy and energy conservation, as well as discussions of policy and regulatory issues that affect renewable energy technologies and their implementation. Papers that do not include original work, but nonetheless present quality analysis or incremental improvements to past work may be published as Technical Briefs. Review papers are accepted but should be discussed with the Editor prior to submission. The Journal also publishes a section called Solar Scenery that features photographs or graphical displays of significant new installations or research facilities.