A 1.8-µm multiwavelength thulium-doped fiber laser based on a hybrid interference filter

IF 6.7 3区 工程技术 Q1 ENGINEERING, ELECTRICAL & ELECTRONIC International Journal of Optomechatronics Pub Date : 2016-09-09 DOI:10.1080/15599612.2016.1230914
He Wei, Zhu Lianqing, Dong Mingli, Luo Fei
{"title":"A 1.8-µm multiwavelength thulium-doped fiber laser based on a hybrid interference filter","authors":"He Wei, Zhu Lianqing, Dong Mingli, Luo Fei","doi":"10.1080/15599612.2016.1230914","DOIUrl":null,"url":null,"abstract":"ABSTRACT A 1.8-µm tunable multiwavelength thulium-doped fiber laser based on a hybrid filter is proposed. In the designed ring-cavity fiber laser, the filter consists of one Sagnac loop and one dual-pass Mach–Zehnder filter. In the experiment, the lasing threshold is 155 mW, and a continuously tunable and stable single-wavelength laser could be realized with a minimum tuning interval of 2.1 nm within a scope of 22.5 nm. When an 1858-nm laser is obtained, the peak power fluctuation is less than 0.83 dB within 20 minutes at room temperature. By adjusting the polarization controller, stable dual-wavelength lasers are simultaneously achieved, and the peak power shift is less than 1.24 dB within a scan time of 20 minutes at room temperature. By changing the polarization state, stable triple-wavelength lasing is obtained, and the power fluctuation is less than 1.95 nm. In the experiment, the 3-dB linewidth of the laser is less than 0.4 nm.","PeriodicalId":50296,"journal":{"name":"International Journal of Optomechatronics","volume":"10 1","pages":"154 - 161"},"PeriodicalIF":6.7000,"publicationDate":"2016-09-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1080/15599612.2016.1230914","citationCount":"10","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Optomechatronics","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1080/15599612.2016.1230914","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 10

Abstract

ABSTRACT A 1.8-µm tunable multiwavelength thulium-doped fiber laser based on a hybrid filter is proposed. In the designed ring-cavity fiber laser, the filter consists of one Sagnac loop and one dual-pass Mach–Zehnder filter. In the experiment, the lasing threshold is 155 mW, and a continuously tunable and stable single-wavelength laser could be realized with a minimum tuning interval of 2.1 nm within a scope of 22.5 nm. When an 1858-nm laser is obtained, the peak power fluctuation is less than 0.83 dB within 20 minutes at room temperature. By adjusting the polarization controller, stable dual-wavelength lasers are simultaneously achieved, and the peak power shift is less than 1.24 dB within a scan time of 20 minutes at room temperature. By changing the polarization state, stable triple-wavelength lasing is obtained, and the power fluctuation is less than 1.95 nm. In the experiment, the 3-dB linewidth of the laser is less than 0.4 nm.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于混合干涉滤光片的1.8µm多波长掺铥光纤激光器
提出了一种基于混合滤波器的1.8µm可调谐掺铥光纤激光器。在设计的环形腔光纤激光器中,滤波器由一个萨格纳克环和一个双通马赫-曾德尔滤波器组成。实验中,激光阈值为155 mW,在22.5 nm范围内,最小调谐间隔为2.1 nm,可实现连续可调谐且稳定的单波长激光器。当获得1858 nm激光器时,在室温下,20分钟内峰值功率波动小于0.83 dB。通过调节偏振控制器,可同时获得稳定的双波长激光器,在室温下扫描时间为20分钟,峰值功率位移小于1.24 dB。通过改变偏振态,获得稳定的三波长激光,且功率波动小于1.95 nm。在实验中,激光器的3db线宽小于0.4 nm。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
International Journal of Optomechatronics
International Journal of Optomechatronics 工程技术-工程:电子与电气
CiteScore
9.30
自引率
0.00%
发文量
3
审稿时长
3 months
期刊介绍: International Journal of Optomechatronics publishes the latest results of multidisciplinary research at the crossroads between optics, mechanics, fluidics and electronics. Topics you can submit include, but are not limited to: -Adaptive optics- Optomechanics- Machine vision, tracking and control- Image-based micro-/nano- manipulation- Control engineering for optomechatronics- Optical metrology- Optical sensors and light-based actuators- Optomechatronics for astronomy and space applications- Optical-based inspection and fault diagnosis- Micro-/nano- optomechanical systems (MOEMS)- Optofluidics- Optical assembly and packaging- Optical and vision-based manufacturing, processes, monitoring, and control- Optomechatronics systems in bio- and medical technologies (such as optical coherence tomography (OCT) systems or endoscopes and optical based medical instruments)
期刊最新文献
Laboratory demonstration of single-camera PPPP wavefront sensing using neural networks Control of a quasi-static MEMS Mirror for raster scanning projection applications Resonator-based near perfect metamaterial absorber with high EMI shielding for Wi-Fi and 5G applications Optofluidic sorting of microparticles using Airy beams Review of sensing and actuation technologies – from optical MEMS and nanophotonics to photonic nanosystems
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1