Impact of salinity on coagulation and dissolved air flotation treatment for oil and gas produced water

Abstract

Produced water is a major wastewater stream in the oil and gas industry which typically consists of dispersed and dissolved oils, and high levels of salinity. Despite concerns that dissolved aromatics in produced water may be detrimental to marine life, discharge regulations and treatment technologies for produced water largely focus on dispersed oil and grease removal. The purpose of this research project was to investigate coagulation with ferric chloride (FeCl3) and dissolved air flotation (DAF) at bench-scale for the removal of both dispersed and dissolved oils from synthetic and offshore produced water samples, with a specific focus on the impact of salinity on the coagulation process. Coagulation and DAF treatment of the produced water samples achieved high removals of dispersed oil and grease, but had limited impact on dissolved aromatics. The coagulation process in the saline produced water samples reduced dispersed oil and grease concentrations from 100 mg/L to below North American discharge limits (i.e. 30 mg/L in Canada, 29 mg/L in the USA) under all conditions tested, while the effectiveness of coagulation treatment in the fresh water synthetic samples was highly dependent on coagulation pH.