Simulation and modeling of a solar-aided underground energy storage system

IF 1.1 4区 工程技术 Q4 THERMODYNAMICS Thermal Science Pub Date : 2023-01-01 DOI:10.2298/tsci220913025s
Özdamar Sağlam, Seyit Özdamar, S. Mert
{"title":"Simulation and modeling of a solar-aided underground energy storage system","authors":"Özdamar Sağlam, Seyit Özdamar, S. Mert","doi":"10.2298/tsci220913025s","DOIUrl":null,"url":null,"abstract":"The significance of energy storage methods and related R&D studies are increasing due to the depletion of fossil fuels, rising energy prices, and growing environmental concerns. Storage of energy means elimination of practical concerns for the time difference between the time when the energy is produced and when it?s needed. The importance of producing and storing energy through renewable sources is increasing every day, especially in developing countries like T?rkiye, as such countries would like to reduce their dependence on foreign sources. This study focuses on an UTES (Underground Thermal Energy Storage) system that was modeled for Van Region, using M-file program. The performance of an isolated day heat system as a TES was investigated, and the thermal energy storage capacity of the system was researched for a 5x5x5 m soil area located on the Van Yuzuncu Yil University Campus. The temperature distribution, heat loss, and efficiency calculations were performed for a complete year and 3D representations of the findings were obtained. The lowest efficiencies were observed in May, while the highest efficiencies were observed in July. It was found that the maximum heat loss from the system took place during December and January, and the system could be easily and effectively become a heating source for a single household with the addition of a heat pump.","PeriodicalId":23125,"journal":{"name":"Thermal Science","volume":"1 1","pages":""},"PeriodicalIF":1.1000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Thermal Science","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.2298/tsci220913025s","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"THERMODYNAMICS","Score":null,"Total":0}
引用次数: 0

Abstract

The significance of energy storage methods and related R&D studies are increasing due to the depletion of fossil fuels, rising energy prices, and growing environmental concerns. Storage of energy means elimination of practical concerns for the time difference between the time when the energy is produced and when it?s needed. The importance of producing and storing energy through renewable sources is increasing every day, especially in developing countries like T?rkiye, as such countries would like to reduce their dependence on foreign sources. This study focuses on an UTES (Underground Thermal Energy Storage) system that was modeled for Van Region, using M-file program. The performance of an isolated day heat system as a TES was investigated, and the thermal energy storage capacity of the system was researched for a 5x5x5 m soil area located on the Van Yuzuncu Yil University Campus. The temperature distribution, heat loss, and efficiency calculations were performed for a complete year and 3D representations of the findings were obtained. The lowest efficiencies were observed in May, while the highest efficiencies were observed in July. It was found that the maximum heat loss from the system took place during December and January, and the system could be easily and effectively become a heating source for a single household with the addition of a heat pump.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
太阳能辅助地下储能系统的仿真与建模
由于化石燃料的枯竭、能源价格的上涨和日益增长的环境问题,储能方法和相关研发研究的意义越来越大。能量储存意味着消除对能量产生的时间和能量产生的时间之间的时间差的实际担忧。年代的需要。通过可再生能源生产和储存能源的重要性与日俱增,尤其是在中国这样的发展中国家。这些国家希望减少对外国能源的依赖。本研究的重点是使用m文件程序对Van地区的地下热能储存系统进行建模。研究了孤立日供热系统作为TES的性能,并对位于Van yuzunku yiil大学校园5x5x5 m土壤区域的系统蓄热能力进行了研究。温度分布、热损失和效率计算进行了整整一年,并获得了结果的3D表示。5月的效率最低,7月的效率最高。结果表明,该系统的最大热损失发生在12月和1月,在增加热泵后,该系统可以轻松有效地成为单个家庭的热源。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Thermal Science
Thermal Science 工程技术-热力学
CiteScore
2.70
自引率
29.40%
发文量
399
审稿时长
5 months
期刊介绍: The main aims of Thermal Science to publish papers giving results of the fundamental and applied research in different, but closely connected fields: fluid mechanics (mainly turbulent flows), heat transfer, mass transfer, combustion and chemical processes in single, and specifically in multi-phase and multi-component flows in high-temperature chemically reacting flows processes present in thermal engineering, energy generating or consuming equipment, process and chemical engineering equipment and devices, ecological engineering, The important characteristic of the journal is the orientation to the fundamental results of the investigations of different physical and chemical processes, always jointly present in real conditions, and their mutual influence. To publish papers written by experts from different fields: mechanical engineering, chemical engineering, fluid dynamics, thermodynamics and related fields. To inform international scientific community about the recent, and most prominent fundamental results achieved in the South-East European region, and particularly in Serbia, and - vice versa - to inform the scientific community from South-East European Region about recent fundamental and applied scientific achievements in developed countries, serving as a basis for technology development. To achieve international standards of the published papers, by the engagement of experts from different countries in the International Advisory board.
期刊最新文献
Perioperative Acute Kidney Injury: Implications, Approach, Prevention. Melting performance enhancement of FHD carreau non-Newtonian PCM in porous media: A geometrical evaluation Numerical study using a double grid to model the effect of the grooves of a vertical wall in a heated cavity on the natural convection of a nanofluid An experimental study on combustion and emissions characteristics in a dual-injection spark-assisted compression ignition engine fueled with PODE/gasoline Numerical analysis of injection parameters influence on experimental diesel engine performances and emissions using [CO] and [NOx] correlated by maximum in-cylinder pressure
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1