The influence of strontium content and sintering temperature on monazite stability

IF 1.4 4区 材料科学 Q3 MATERIALS SCIENCE, CERAMICS Science of Sintering Pub Date : 2023-01-01 DOI:10.2298/sos220811024m
M. Mirković, J. Maletaskic, S. Butulija, L. Andjelković, M. Šuljagić
{"title":"The influence of strontium content and sintering temperature on monazite stability","authors":"M. Mirković, J. Maletaskic, S. Butulija, L. Andjelković, M. Šuljagić","doi":"10.2298/sos220811024m","DOIUrl":null,"url":null,"abstract":"This paper shows a simple way to synthesize a series of Ce1-xSrxPO4 ceramic materials using acetate solutions of Ce and Sr instead of nitrate which were used so far. For synthesis, the preparation method was used by simple mixing of acetate solutions of Ceand Sr(, with NaH2PO4 at room temperature, and the studied compositions were Ce1-xSrxPO4 (where x = 0, 0.1, 0.2, 0.3, 0.4, 0.5). The disintegration of Sr in monazite structures in different sintering temperature ranges from 600?C to 1000?C was investigated. The X-ray diffraction was used to track the evolution of the phase composition with thermal treatment. The morphology of sintered ceramics was obtained by scanning electron microscopy and vibrational bands of selected spectra were observed using the FT-IR method. Relative geometric density of selected samples was evaluated. The most favorable conditions for obtaining high-temperature Ce, Sr phosphate-based ceramic material are reported.","PeriodicalId":21592,"journal":{"name":"Science of Sintering","volume":"1 1","pages":""},"PeriodicalIF":1.4000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Science of Sintering","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.2298/sos220811024m","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0

Abstract

This paper shows a simple way to synthesize a series of Ce1-xSrxPO4 ceramic materials using acetate solutions of Ce and Sr instead of nitrate which were used so far. For synthesis, the preparation method was used by simple mixing of acetate solutions of Ceand Sr(, with NaH2PO4 at room temperature, and the studied compositions were Ce1-xSrxPO4 (where x = 0, 0.1, 0.2, 0.3, 0.4, 0.5). The disintegration of Sr in monazite structures in different sintering temperature ranges from 600?C to 1000?C was investigated. The X-ray diffraction was used to track the evolution of the phase composition with thermal treatment. The morphology of sintered ceramics was obtained by scanning electron microscopy and vibrational bands of selected spectra were observed using the FT-IR method. Relative geometric density of selected samples was evaluated. The most favorable conditions for obtaining high-temperature Ce, Sr phosphate-based ceramic material are reported.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
锶含量和烧结温度对独居石稳定性的影响
本文介绍了一种用Ce和Sr的醋酸溶液代替目前常用的硝酸盐合成Ce1-xSrxPO4系列陶瓷材料的简单方法。合成方法为Ce1-xSrxPO4(其中x = 0,0.1, 0.2, 0.3, 0.4, 0.5),在室温下将ce1和Sr()的醋酸溶液与NaH2PO4简单混合。不同烧结温度下,独居石结构中Sr的崩解范围为600?C到1000?C被调查。采用x射线衍射跟踪热处理后相组成的演变。用扫描电子显微镜观察了烧结陶瓷的形貌,用傅里叶变换红外光谱法观察了选定光谱的振动带。评价所选样品的相对几何密度。报道了制备高温铈锶磷酸盐基陶瓷材料的最有利条件。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Science of Sintering
Science of Sintering 工程技术-材料科学:硅酸盐
CiteScore
2.50
自引率
46.70%
发文量
20
审稿时长
3.3 months
期刊介绍: Science of Sintering is a unique journal in the field of science and technology of sintering. Science of Sintering publishes papers on all aspects of theoretical and experimental studies, which can contribute to the better understanding of the behavior of powders and similar materials during consolidation processes. Emphasis is laid on those aspects of the science of materials that are concerned with the thermodynamics, kinetics and mechanism of sintering and related processes. In accordance with the significance of disperse materials for the sintering technology, papers dealing with the question of ultradisperse powders, tribochemical activation and catalysis are also published. Science of Sintering journal is published four times a year. Types of contribution: Original research papers, Review articles, Letters to Editor, Book reviews.
期刊最新文献
Effect of glass powder on the friction performance of automotive brake lining materials Production of Ni-Co-bronze composites with different tic composition by hot pressing The influence of boron addition on properties of copper-zirconium alloys Novel basalt-stainless steel composite materials with improved fracture toughness Cavitation resistance of the material PA 3200 GF produced by selective laser sintering
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1