Improvement of Biofilm Carriers for the Treatment of Automotive Industry Wastewater

P. Thury, L. Bartha, G. Gulyás, V. Pitás, B. Fazekas, A. Kárpáti
{"title":"Improvement of Biofilm Carriers for the Treatment of Automotive Industry Wastewater","authors":"P. Thury, L. Bartha, G. Gulyás, V. Pitás, B. Fazekas, A. Kárpáti","doi":"10.1515/309","DOIUrl":null,"url":null,"abstract":"The efficient biological treatment of the wastewater of the automotive industry is difficult, mainly because of the low biological oxygen demand/chemical oxygen demand (BOD/COD) ratio. Moreover, wastewater of the automobile industry contains heavy metals and other chemical substances that may have toxic effects. Biofilm and hybrid technologies could be optimal solutions for the treatment of such heavily biodegradable wastewater streams. This paper presents the experimental results of the examination of modified biofilm carriers developed for the treatment of the wastewater of the automotive industry. Three modified biofilm carriers were examined: a high-density polyetyilene (HDPE), an HDPE modified with 50% carbon nanotube (CNT) content, and an HDPE modified with 75% CNT content. They were compared to a patented biofilm carrier having similar morphological properties (control). The examination consisted of two parts: (1) studying the colonisation of biofilm on each carrier, and (2) studying the biological COD removal efficiency of biofilm reactors filled with the four different biofilm carriers in 25% volumetric ratio each with an influent industrial emulsion sewage. The obtained results demonstrated that neither the rate of biofilm colonisation, nor the COD removal efficiency show any significant difference comparing the four biofilm carriers. The colonisation of biofilm was appropriate on each carrier and this ensured proper efficiency of COD removal in each biofilm reactor. Based on the results, it can be stated that the suggested advantageous characteristics of CNTs do not appear as it is mixed in the plastic raw material during the production of biofilm carriers. The absence of the significant difference observed between the examined carriers suggests that the production of biofilm carriers from recycled plastic could carry financial advantages compared to the control carrier. Further experiments could specify differences by various hydraulic loads or toxic effects.","PeriodicalId":13010,"journal":{"name":"Hungarian Journal of Industrial Chemistry","volume":"17 1","pages":"1-4"},"PeriodicalIF":0.0000,"publicationDate":"2012-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Hungarian Journal of Industrial Chemistry","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1515/309","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 3

Abstract

The efficient biological treatment of the wastewater of the automotive industry is difficult, mainly because of the low biological oxygen demand/chemical oxygen demand (BOD/COD) ratio. Moreover, wastewater of the automobile industry contains heavy metals and other chemical substances that may have toxic effects. Biofilm and hybrid technologies could be optimal solutions for the treatment of such heavily biodegradable wastewater streams. This paper presents the experimental results of the examination of modified biofilm carriers developed for the treatment of the wastewater of the automotive industry. Three modified biofilm carriers were examined: a high-density polyetyilene (HDPE), an HDPE modified with 50% carbon nanotube (CNT) content, and an HDPE modified with 75% CNT content. They were compared to a patented biofilm carrier having similar morphological properties (control). The examination consisted of two parts: (1) studying the colonisation of biofilm on each carrier, and (2) studying the biological COD removal efficiency of biofilm reactors filled with the four different biofilm carriers in 25% volumetric ratio each with an influent industrial emulsion sewage. The obtained results demonstrated that neither the rate of biofilm colonisation, nor the COD removal efficiency show any significant difference comparing the four biofilm carriers. The colonisation of biofilm was appropriate on each carrier and this ensured proper efficiency of COD removal in each biofilm reactor. Based on the results, it can be stated that the suggested advantageous characteristics of CNTs do not appear as it is mixed in the plastic raw material during the production of biofilm carriers. The absence of the significant difference observed between the examined carriers suggests that the production of biofilm carriers from recycled plastic could carry financial advantages compared to the control carrier. Further experiments could specify differences by various hydraulic loads or toxic effects.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
生物膜载体处理汽车工业废水的研究
汽车工业废水的高效生物处理难度较大,主要原因是其生物需氧量/化学需氧量(BOD/COD)比较低。此外,汽车工业的废水含有重金属和其他可能具有毒性作用的化学物质。生物膜和混合技术可能是处理这种高度可生物降解废水流的最佳解决方案。本文介绍了用于汽车工业废水处理的改性生物膜载体的试验研究结果。研究了三种改性生物膜载体:高密度聚乙烯(HDPE)、碳纳米管(CNT)含量为50%的HDPE和碳纳米管含量为75%的HDPE。将它们与具有相似形态特性的专利生物膜载体(对照)进行比较。试验分为两部分:(1)研究生物膜在每种载体上的定殖情况;(2)研究四种不同生物膜载体以25%的体积比填充生物膜反应器,对工业乳化液污水的生物COD去除效率。结果表明,4种生物膜载体的生物膜定植率和COD去除率均无显著差异。生物膜在每个载体上的定殖是适当的,这确保了每个生物膜反应器中COD去除的适当效率。根据研究结果,可以得出结论,在生物膜载体的生产过程中,由于碳纳米管混合在塑料原料中,因此没有出现所建议的有利特性。所检查的载体之间没有观察到显著差异,这表明与对照载体相比,用再生塑料生产生物膜载体可能具有经济优势。进一步的实验可以通过不同的水力负荷或毒性作用来确定差异。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Preliminary Study of Cesium Immobilization in a Geopolymer Matrix Examination of fuel consumption factors, basics of precision and on-board diagnostic measurements Localization accuracy improvement of autonomous vehicles using sensor fusion and extended Kalman filter Improving the efficiency of neural networks with virtual training data Optimizing the planning and manufacturing processes of electromagnetic energy harvesting equipment
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1