Corrosion mechanism research and microstructure analysis of Baosteel No. 3 blast furnace hearth

IF 3.1 2区 材料科学 Q1 METALLURGY & METALLURGICAL ENGINEERING Journal of Iron and Steel Research(International) Pub Date : 2017-10-01 DOI:10.1016/S1006-706X(17)30148-6
Xun-fu Wang , Qi-jie Zhai
{"title":"Corrosion mechanism research and microstructure analysis of Baosteel No. 3 blast furnace hearth","authors":"Xun-fu Wang ,&nbsp;Qi-jie Zhai","doi":"10.1016/S1006-706X(17)30148-6","DOIUrl":null,"url":null,"abstract":"<div><h3>Abstract</h3><p>Baosteel No. 3 blast furnace hearth was divided into tuyere area, taphole area, taphole upper side wall and taphole lower side wall according to different working situations. Through chemical composition analysis, scanning electron microscopy, X-ray diffraction, energy dispersive spectrometry and other means, chemical composition and microstructure of different parts of hearth carbon brick were analyzed and markedly different corrosion mechanisms of these areas were found. Zn element in form of ZnO mainly deposited on the hot side of carbon brick. There was no obvious evidence that Zn permeates into carbon bricks and erodes them. Except for taphole area, K, Na, and Fe contents from hot side to cold side gradually rise and fall, resulting in the decrease of apparent porosity, the increase of density and the higher thermal conductivity compared with those of new carbon brick. The higher content of Fe in carbon brick leads to more serious erosion because Fe has greatly changed the physical properties of carbon brick. In the taphole area, the contents of Si and Al present obvious concentration gradient because of the mechanical souring of molten iron and slag. The SiO<sub>2</sub> and Al<sub>2</sub>O<sub>3</sub> particles that have different expansion factors with carbon brick damaged the carbon substrate because of temperature fluctuation. The graphitized carbon found on H4 where is the most serious corrosion site means that the carbon brick ever directly contacts with molten iron.</p></div>","PeriodicalId":64470,"journal":{"name":"Journal of Iron and Steel Research(International)","volume":"24 10","pages":"Pages 1016-1022"},"PeriodicalIF":3.1000,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S1006-706X(17)30148-6","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Iron and Steel Research(International)","FirstCategoryId":"1087","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1006706X17301486","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 2

Abstract

Baosteel No. 3 blast furnace hearth was divided into tuyere area, taphole area, taphole upper side wall and taphole lower side wall according to different working situations. Through chemical composition analysis, scanning electron microscopy, X-ray diffraction, energy dispersive spectrometry and other means, chemical composition and microstructure of different parts of hearth carbon brick were analyzed and markedly different corrosion mechanisms of these areas were found. Zn element in form of ZnO mainly deposited on the hot side of carbon brick. There was no obvious evidence that Zn permeates into carbon bricks and erodes them. Except for taphole area, K, Na, and Fe contents from hot side to cold side gradually rise and fall, resulting in the decrease of apparent porosity, the increase of density and the higher thermal conductivity compared with those of new carbon brick. The higher content of Fe in carbon brick leads to more serious erosion because Fe has greatly changed the physical properties of carbon brick. In the taphole area, the contents of Si and Al present obvious concentration gradient because of the mechanical souring of molten iron and slag. The SiO2 and Al2O3 particles that have different expansion factors with carbon brick damaged the carbon substrate because of temperature fluctuation. The graphitized carbon found on H4 where is the most serious corrosion site means that the carbon brick ever directly contacts with molten iron.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
宝钢3号高炉炉底腐蚀机理研究及显微组织分析
摘要宝钢3号高炉根据不同的工况,将炉膛分为风口区、出料口区、出料口上侧壁和出料口下侧壁。通过化学成分分析、扫描电镜、x射线衍射、能量色散光谱等手段,分析了炉膛碳砖不同部位的化学成分和微观结构,发现这些部位的腐蚀机理有明显不同。锌元素以ZnO形式主要沉积在碳砖的热侧。没有明显的证据表明锌会渗透到碳砖中并侵蚀碳砖。除出料口面积外,K、Na、Fe含量由热侧向冷侧逐渐上升和下降,导致表观孔隙率降低,密度增大,导热系数高于新炭砖。碳砖中铁含量越高,侵蚀越严重,因为铁极大地改变了碳砖的物理性质。在出口区,由于铁水和炉渣的机械酸化,Si和Al的含量呈现明显的浓度梯度。与碳砖膨胀系数不同的SiO2和Al2O3颗粒由于温度波动对碳基材造成破坏。在腐蚀最严重的H4上发现石墨化碳,这意味着碳砖与铁水直接接触。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
4.30
自引率
0.00%
发文量
2879
审稿时长
3.0 months
期刊最新文献
Influence of laser re-melting and vacuum heat treatment on plasma-sprayed FeCoCrNiAl alloy coatings Modeling deformation resistance for hot rolling based on generalized additive model Effect of solution pH, Cl− concentration and temperature on electrochemical behavior of PH13-8Mo steel in acidic environments Effects of iron compounds on pyrolysis behavior of coals and metallurgical properties of resultant cokes Effect of heat input on microstructure and mechanical properties of dissimilar joints of AISI 316L steel and API X70 high-strength low-alloy steel
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1