Mechanical properties of particle reinforced titanium and titanium alloys

IF 0.7 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Kovove Materialy-Metallic Materials Pub Date : 2010-01-01 DOI:10.4149/KM_2010_2_87
C. Poletti, G. Holtl
{"title":"Mechanical properties of particle reinforced titanium and titanium alloys","authors":"C. Poletti, G. Holtl","doi":"10.4149/KM_2010_2_87","DOIUrl":null,"url":null,"abstract":"Titanium grade 2, Ti-6Al-4V and Ti-6Al-6V-2Sn unreinforced and reinforced with 10–15 vol.% SiC particles, 5 vol.% TiB whiskers and 12–20 vol.% TiC are characterized by compression tests, micro-, macro- and nano-hardness measurements, and X-ray diffraction. The measured Young’s moduli up to 350 ◦ C were found to be described using the Halpin Tsai model for the TiC and of TiB reinforced materials (aspect ratio of 1 and 100, respectively). The strengthening by SiC addition is attributed to matrix strain hardening due to the thermal misfit between the matrix and the reinforcement. The strengthening of TiC reinforced material is attributed to interstitial C dissolved in the alpha phase proved with the nanohardness results. TiB precipitates produce strengthening by grain refinement and dispersion hardening. The presence of 1 wt.% of C in the matrix also should be the reason for higher Young’s modulus and strengthening. K e y w o r d s : metal-matrix composites (MMCs), mechanical properties, deformation, elastic properties, powder metallurgy","PeriodicalId":49937,"journal":{"name":"Kovove Materialy-Metallic Materials","volume":null,"pages":null},"PeriodicalIF":0.7000,"publicationDate":"2010-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"4","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Kovove Materialy-Metallic Materials","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.4149/KM_2010_2_87","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 4

Abstract

Titanium grade 2, Ti-6Al-4V and Ti-6Al-6V-2Sn unreinforced and reinforced with 10–15 vol.% SiC particles, 5 vol.% TiB whiskers and 12–20 vol.% TiC are characterized by compression tests, micro-, macro- and nano-hardness measurements, and X-ray diffraction. The measured Young’s moduli up to 350 ◦ C were found to be described using the Halpin Tsai model for the TiC and of TiB reinforced materials (aspect ratio of 1 and 100, respectively). The strengthening by SiC addition is attributed to matrix strain hardening due to the thermal misfit between the matrix and the reinforcement. The strengthening of TiC reinforced material is attributed to interstitial C dissolved in the alpha phase proved with the nanohardness results. TiB precipitates produce strengthening by grain refinement and dispersion hardening. The presence of 1 wt.% of C in the matrix also should be the reason for higher Young’s modulus and strengthening. K e y w o r d s : metal-matrix composites (MMCs), mechanical properties, deformation, elastic properties, powder metallurgy
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
颗粒增强钛及钛合金的力学性能
通过压缩试验、显微、宏观和纳米硬度测量以及x射线衍射对2级钛、Ti-6Al-4V和Ti-6Al-6V-2Sn未增强和增强的材料进行了表征,并分别添加了10 - 15%的SiC颗粒、5%的TiB晶须和12% - 20%的TiC。测量到的杨氏模量高达350°C,发现使用TiC和TiB增强材料的Halpin Tsai模型(长径比分别为1和100)进行描述。SiC的强化是由于基体与增强体之间的热失配引起的基体应变硬化。TiC增强材料的强化是由于α相中溶解了大量的C,纳米硬度测试结果也证实了这一点。TiB析出物通过晶粒细化和弥散硬化产生强化。在基体中存在1 wt.%的C也应该是高杨氏模量和强化的原因。主要研究方向:金属基复合材料(MMCs),力学性能,变形,弹性性能,粉末冶金
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Kovove Materialy-Metallic Materials
Kovove Materialy-Metallic Materials MATERIALS SCIENCE, MULTIDISCIPLINARY-METALLURGY & METALLURGICAL ENGINEERING
CiteScore
1.20
自引率
14.30%
发文量
36
审稿时长
3 months
期刊介绍: Kovove Materialy - Metallic Materials is dedicated to publishing original theoretical and experimental papers concerned with structural, nanostructured, and functional metallic and selected non-metallic materials. Emphasis is placed on those aspects of the science of materials that address: the relationship between the microstructure of materials and their properties, including mechanical, electrical, magnetic and chemical properties; the relationship between the microstructure of materials and the thermodynamics, kinetics and mechanisms of processes; the synthesis and processing of materials, with emphasis on microstructural mechanisms and control; advances in the characterization of the microstructure and properties of materials with experiments and models which help in understanding the properties of materials.
期刊最新文献
Influence of tool rotational speed on the microstructure and mechanical behavior of friction stir processed AA 7050 aluminum alloy Study of electronic and optical properties of As-doped TiO2 using first principles "Evaluating the mechanical and tribological characteristics of aluminium hybrid composites incorporating ZrO2 and graphite micro-particles " "The impact of shielding gas composition and welding speed on weld quality in MAG welding: An experimental study " Thermal properties and container compatibility of (Al0.8Si0.2)100−xBix phase change energy storage alloys
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1