Graphite nodularization and graphitization of magnesium treated cast irons solidified under argon atmosphere pressure up to 145 atm

T. Okamoto, X. Huang, A. Kagawa
{"title":"Graphite nodularization and graphitization of magnesium treated cast irons solidified under argon atmosphere pressure up to 145 atm","authors":"T. Okamoto, X. Huang, A. Kagawa","doi":"10.1179/030634584790420168","DOIUrl":null,"url":null,"abstract":"AbstractArgon atmosphere pressure had no effect on the nodularization of graphite in magnesium treated cast iron, while it had considerable influence on the graphitization and graphite nodule number. With increasing argon atmosphere pressure up to 145 atm, the graphitization was retarded and the graphite nodule number reduced. The degree of nodularization became maximum at a magnesium content of about 0.15 mass-% and thereafter decreased as the magnesium content increased. For values >0.15 mass-%Mg, meshlike and flaky graphite was formed in the region adjacent to tiny particles which proved to be magnesium droplets. The effect of magnesium on the graphitization was opposite to that on the nodularization of graphite, i.e. the graphitization was suppressed with increasing magnesium content up to about 0.15 mass-% and was promoted when the magnesium content exceeded 0.15 mass-%.","PeriodicalId":18750,"journal":{"name":"Metal science","volume":"9 1","pages":"169-176"},"PeriodicalIF":0.0000,"publicationDate":"1984-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"5","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Metal science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1179/030634584790420168","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 5

Abstract

AbstractArgon atmosphere pressure had no effect on the nodularization of graphite in magnesium treated cast iron, while it had considerable influence on the graphitization and graphite nodule number. With increasing argon atmosphere pressure up to 145 atm, the graphitization was retarded and the graphite nodule number reduced. The degree of nodularization became maximum at a magnesium content of about 0.15 mass-% and thereafter decreased as the magnesium content increased. For values >0.15 mass-%Mg, meshlike and flaky graphite was formed in the region adjacent to tiny particles which proved to be magnesium droplets. The effect of magnesium on the graphitization was opposite to that on the nodularization of graphite, i.e. the graphitization was suppressed with increasing magnesium content up to about 0.15 mass-% and was promoted when the magnesium content exceeded 0.15 mass-%.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
镁处理铸铁在高达145大气压的氩气压力下凝固的石墨球化和石墨化
摘要:大气压力对镁处理铸铁中石墨的球化没有影响,但对石墨化和石墨球团数有较大影响。当氩气压力升高至145 atm时,石墨化速度减慢,石墨结节数减少。当镁含量约为0.15质量%时,球化程度最大,随后随镁含量的增加而减小。当质量-%Mg为> ~ 0.15 Mg时,在镁滴附近形成网格状片状石墨。镁对石墨化的影响与对石墨球化的影响相反,当镁含量增加到0.15质量%左右时,石墨化受到抑制,当镁含量超过0.15质量%时,石墨化得到促进。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Clean steel - a debatable concept Heat flow distribution in electron beam rapidly quenched surfaces Effects of alloying elements, impurities, and carbon on temper embrittlement of steels Ternary diffusion in Cu-Ni-Zn alloys at 1133 K Structural aspects of rapidly solidified Al-Cr-Fe-Ni alloy
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1