Properties of Permalloy nanodiscs in magnetic vortex state and magneto-mechanical treatment of cancer cells.

M. Goiriena-Goikoetxea, I. Orue, K. Guslienko, E. Berganza, M. Jaafar, A. Asenjo, D. Muñoz, A. Muela, A. García-Arribas
{"title":"Properties of Permalloy nanodiscs in magnetic vortex state and magneto-mechanical treatment of cancer cells.","authors":"M. Goiriena-Goikoetxea, I. Orue, K. Guslienko, E. Berganza, M. Jaafar, A. Asenjo, D. Muñoz, A. Muela, A. García-Arribas","doi":"10.1109/INTMAG.2018.8508850","DOIUrl":null,"url":null,"abstract":"Magnetic dots in vortex state have been intensively studied due to their attractive properties for emerging multidisciplinary applications such as magnetic information storage, spintronics and biomedicine. In the vortex ground state, the magnetic moments are curled in the dot plane and only at the center the core of the vortex points perpendicularly to the plane. This configuration gives rise to a characteristic magnetic behavior as a function of the in-plane applied magnetic field, displaying hysteresis loops with no remanence or coercive field and open lobes at high field [1]. Apart from the intrinsic interest that this peculiar magnetic structure offers from a fundamental point of view, some appealing applications for this type of particles have been proposed, such as the magneto-mechanical actuation for cancer cell destruction [2]. This therapy employs disc-shaped particles with vortex magnetic configuration that, under an low amplitude (about 10 mT) and low frequency (tens of Hertz) AC fields, are made to oscillate, hitting and damaging the integrity of cancer cells to which they were attached. Since this actuation does not imply heat generation, in principle, the magneto-mechanical actuation avoids the risk of damaging the surrounding healthy tissue as it can occur in magnetic hyperthermia. Additionally, it is thought that the magneto-mechanical actuation leads to the apoptosis of the cells instead of the necrotic pathway caused by heating, avoiding cell-leakage in the surrounding extracellular environment and inflammatory reactions caused by necrosis [3]. In this work, we present the results obtained in Permalloy circular dots fabricated by hole mask colloidal lithography (HCL) with diameters ranging from 60 to 140 nm, and different thicknesses from 20 to 60 nm. HCL is a bottom-up fabrication technique that basically uses a monolayer of self-assembled polystyrene nanospheres to create a template of holes in a polymer film deposited over a substrate. The holes are filled with sputtered Permalloy and the polymeric template removed to produce a dense pattern of dots on the substrate [4]. For their use in the in vitro experiments, the nanostructures are prepared on top of a sacrificial layer that is later removed to release the discs. In this case, the discs are prepared with a thin (4 nm) gold layer on both sides. The nanodiscs on the substrate are magnetically characterized by SQUID and MOKE magnetometries, and Magnetic Force Microscopy (MFM). Additional micromagnetic simulations and analytic calculations have been performed to clarify the magnetization configuration in the dots with different diameter to thickness ratios [5]. In the dots with a diameter of 140 nm, the MFM images reveal that the vortex core occupies about half the size of the dots. This vortex core diameter is approximately equal to the dot diameter for the smaller dots (60 nm). Micromagnetic calculations confirms that, in this case, the size of the core can be even greater that the dot size. Nevertheless, this does not prevent the existence of a clear magnetic vortex behavior as demonstrated by the measured hysteresis loops. The suitability of nanodiscs for cancer cell treatment using the magneto-mechanical actuation is evaluated using lung carcinoma cells for the in vitro experiments. For comparing with previous studies, we simultaneously perform the experiments using Permalloy discs with a diameter of 2 μm fabricated by photolithography. The internalization process in cancer cells, along with the cytotoxic effect, and the influence of a low magnetic field on the viability of the cells are studied. We observe that the discs do not disrupt the viability of the cells, but they seem to inhibit their proliferation. The application of an alternating magnetic field to produce the magneto-mechanical actuation seems to have a scarce impact on the cell viability when using large discs (2 um in diameter) but, with the use of nanodiscs, the destroyed cell rate is increased to 30 % among the cells that have internalized discs. Figure 2 show an example of cell death by the treatment. We must stress that these results are obtained in a small number of experiments, and that we have used manual counting of cells under the microscopy (no cytometers used). In any case, although the percentages may not be statistically sound, the results prove the ability of the nanodiscs to produce irreparable changes in cancer cell integrity. Acknowledgements This work was supported by the Spanish Government under Project MAT2014-55049-C2-R and by the Basque Government under the Micro4Fab Project (KK-2016/00030). K. G. acknowledges support by IKERBASQUE (Basque Foundation for Science) and by Spanish MINECO grant FIS2016-78591-C3-3-R.","PeriodicalId":6571,"journal":{"name":"2018 IEEE International Magnetic Conference (INTERMAG)","volume":"27 1","pages":"1-1"},"PeriodicalIF":0.0000,"publicationDate":"2018-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2018 IEEE International Magnetic Conference (INTERMAG)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/INTMAG.2018.8508850","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

Magnetic dots in vortex state have been intensively studied due to their attractive properties for emerging multidisciplinary applications such as magnetic information storage, spintronics and biomedicine. In the vortex ground state, the magnetic moments are curled in the dot plane and only at the center the core of the vortex points perpendicularly to the plane. This configuration gives rise to a characteristic magnetic behavior as a function of the in-plane applied magnetic field, displaying hysteresis loops with no remanence or coercive field and open lobes at high field [1]. Apart from the intrinsic interest that this peculiar magnetic structure offers from a fundamental point of view, some appealing applications for this type of particles have been proposed, such as the magneto-mechanical actuation for cancer cell destruction [2]. This therapy employs disc-shaped particles with vortex magnetic configuration that, under an low amplitude (about 10 mT) and low frequency (tens of Hertz) AC fields, are made to oscillate, hitting and damaging the integrity of cancer cells to which they were attached. Since this actuation does not imply heat generation, in principle, the magneto-mechanical actuation avoids the risk of damaging the surrounding healthy tissue as it can occur in magnetic hyperthermia. Additionally, it is thought that the magneto-mechanical actuation leads to the apoptosis of the cells instead of the necrotic pathway caused by heating, avoiding cell-leakage in the surrounding extracellular environment and inflammatory reactions caused by necrosis [3]. In this work, we present the results obtained in Permalloy circular dots fabricated by hole mask colloidal lithography (HCL) with diameters ranging from 60 to 140 nm, and different thicknesses from 20 to 60 nm. HCL is a bottom-up fabrication technique that basically uses a monolayer of self-assembled polystyrene nanospheres to create a template of holes in a polymer film deposited over a substrate. The holes are filled with sputtered Permalloy and the polymeric template removed to produce a dense pattern of dots on the substrate [4]. For their use in the in vitro experiments, the nanostructures are prepared on top of a sacrificial layer that is later removed to release the discs. In this case, the discs are prepared with a thin (4 nm) gold layer on both sides. The nanodiscs on the substrate are magnetically characterized by SQUID and MOKE magnetometries, and Magnetic Force Microscopy (MFM). Additional micromagnetic simulations and analytic calculations have been performed to clarify the magnetization configuration in the dots with different diameter to thickness ratios [5]. In the dots with a diameter of 140 nm, the MFM images reveal that the vortex core occupies about half the size of the dots. This vortex core diameter is approximately equal to the dot diameter for the smaller dots (60 nm). Micromagnetic calculations confirms that, in this case, the size of the core can be even greater that the dot size. Nevertheless, this does not prevent the existence of a clear magnetic vortex behavior as demonstrated by the measured hysteresis loops. The suitability of nanodiscs for cancer cell treatment using the magneto-mechanical actuation is evaluated using lung carcinoma cells for the in vitro experiments. For comparing with previous studies, we simultaneously perform the experiments using Permalloy discs with a diameter of 2 μm fabricated by photolithography. The internalization process in cancer cells, along with the cytotoxic effect, and the influence of a low magnetic field on the viability of the cells are studied. We observe that the discs do not disrupt the viability of the cells, but they seem to inhibit their proliferation. The application of an alternating magnetic field to produce the magneto-mechanical actuation seems to have a scarce impact on the cell viability when using large discs (2 um in diameter) but, with the use of nanodiscs, the destroyed cell rate is increased to 30 % among the cells that have internalized discs. Figure 2 show an example of cell death by the treatment. We must stress that these results are obtained in a small number of experiments, and that we have used manual counting of cells under the microscopy (no cytometers used). In any case, although the percentages may not be statistically sound, the results prove the ability of the nanodiscs to produce irreparable changes in cancer cell integrity. Acknowledgements This work was supported by the Spanish Government under Project MAT2014-55049-C2-R and by the Basque Government under the Micro4Fab Project (KK-2016/00030). K. G. acknowledges support by IKERBASQUE (Basque Foundation for Science) and by Spanish MINECO grant FIS2016-78591-C3-3-R.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
磁性涡旋状态下坡莫合金纳米片的性能及对癌细胞的磁机械治疗。
涡旋态磁点由于其在磁信息存储、自旋电子学和生物医学等多学科领域的应用而受到广泛的关注。在涡旋基态下,磁矩在点平面上是卷曲的,只有涡旋的核心在中心垂直于点平面。这种结构产生了一种特征磁行为,作为面内外加磁场的函数,显示无剩磁或矫顽力场的磁滞回线和高场下的开叶[1]。除了从基本观点来看,这种特殊的磁性结构所带来的内在兴趣之外,还提出了这种类型的粒子的一些吸引人的应用,例如用于癌细胞破坏的磁机械驱动[2]。这种疗法使用具有涡旋磁结构的圆盘状粒子,在低振幅(约10mt)和低频(数十赫兹)交流磁场下,使其振荡,撞击并破坏其附着的癌细胞的完整性。由于这种驱动并不意味着产生热量,原则上,磁机械驱动避免了在磁热疗中可能发生的损害周围健康组织的风险。此外,有人认为磁机械驱动导致细胞凋亡,而不是通过加热引起的坏死途径,避免了细胞在周围细胞外环境中的渗漏和坏死引起的炎症反应[3]。在这项工作中,我们展示了用孔掩膜胶态光刻(HCL)制备的Permalloy圆点的结果,其直径范围为60至140 nm,厚度范围为20至60 nm。HCL是一种自下而上的制造技术,基本上是使用一层自组装的聚苯乙烯纳米球,在沉积在衬底上的聚合物薄膜上创建一个孔模板。用溅射的坡莫合金填充孔,并去除聚合物模板,在衬底上产生密集的点图案[4]。为了在体外实验中使用,纳米结构是在牺牲层的顶部制备的,然后移除牺牲层以释放圆盘。在这种情况下,圆盘的两侧都有一层薄薄的(4纳米)金层。利用SQUID和MOKE磁强计以及磁力显微镜(MFM)对衬底上的纳米片进行了磁性表征。另外还进行了微磁模拟和分析计算,以阐明不同直径与厚度比的点的磁化结构[5]。在直径为140 nm的圆点中,MFM图像显示漩涡核心约占圆点大小的一半。这个漩涡核心直径大约等于小点的网点直径(60纳米)。微磁计算证实,在这种情况下,核心的大小甚至可以大于点的大小。然而,这并不妨碍磁涡流行为的存在,正如测量到的磁滞回线所证明的那样。利用肺癌细胞进行体外实验,评估纳米盘在磁机械驱动下治疗癌细胞的适用性。为了与以往的研究进行比较,我们同时采用光刻法制备直径为2 μm的坡莫合金圆盘进行实验。本文研究了肿瘤细胞的内化过程、细胞毒性作用以及低磁场对细胞活力的影响。我们观察到椎间盘不会破坏细胞的生存能力,但它们似乎抑制了细胞的增殖。当使用大圆盘(直径2微米)时,应用交变磁场产生磁机械驱动似乎对细胞活力影响不大,但使用纳米圆盘,在内化圆盘的细胞中,细胞破坏率增加到30%。图2显示了一个处理后细胞死亡的例子。我们必须强调,这些结果是在少数实验中获得的,并且我们在显微镜下对细胞进行了人工计数(没有使用细胞仪)。在任何情况下,尽管百分比在统计上可能不合理,但结果证明了纳米圆盘对癌细胞完整性产生不可挽回的改变的能力。本研究得到了西班牙政府MAT2014-55049-C2-R项目和巴斯克政府Micro4Fab项目(KK-2016/00030)的支持。k.g.感谢巴斯克科学基金会和西班牙MINECO基金FIS2016-78591-C3-3-R的支持。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
High-order methods applied to electrical machine modeling. 3D Structure Line Start Synchronous Reluctance Motor Design Based on Selective Laser Melting of 3D Printing. Memory Efficient Harmonic Method for Electromagnetic Models Using Scattering Matrices. Convergence Analysis of SEM and FEM to an analytical field distribution in the airgap. Eddy Current-TMR Sensor for Micro-Motion Detection of Orthopaedic Implants
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1