Creep ductility and modified Monkman-Grant equation for Gr.92 by incorporating total strain

IF 1 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Materials at High Temperatures Pub Date : 2023-04-03 DOI:10.1080/09603409.2023.2195060
F. Abe
{"title":"Creep ductility and modified Monkman-Grant equation for Gr.92 by incorporating total strain","authors":"F. Abe","doi":"10.1080/09603409.2023.2195060","DOIUrl":null,"url":null,"abstract":"ABSTRACT A modified Monkman-Grant equation, which can provide a more accurate means of predicting creep rupture life than the standard Monkman-Grant formula, has been investigated for Gr.92 using creep data in the NIMS Creep Data Sheets at 550 to 750°C. The t r versus minimum creep rate min plot, which is called the Monkman-Grant relation, deviates downward at low stresses and long times. Better correlation of the t r with the min is obtained by the replacement of t r with (t r /ε r), where ε r is the total or rupture strain. The (t r /ε r) is inversely proportional to the min over a wide range of stress, temperature and test duration, and the magnitude of data scattering is only a little bit even at low stresses and long times. The creep life of Gr.92 can be predicted by evaluating the min, together with the ε r evaluated from the stress and or min dependence.","PeriodicalId":49877,"journal":{"name":"Materials at High Temperatures","volume":"29 1","pages":"192 - 200"},"PeriodicalIF":1.0000,"publicationDate":"2023-04-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materials at High Temperatures","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/09603409.2023.2195060","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

ABSTRACT A modified Monkman-Grant equation, which can provide a more accurate means of predicting creep rupture life than the standard Monkman-Grant formula, has been investigated for Gr.92 using creep data in the NIMS Creep Data Sheets at 550 to 750°C. The t r versus minimum creep rate min plot, which is called the Monkman-Grant relation, deviates downward at low stresses and long times. Better correlation of the t r with the min is obtained by the replacement of t r with (t r /ε r), where ε r is the total or rupture strain. The (t r /ε r) is inversely proportional to the min over a wide range of stress, temperature and test duration, and the magnitude of data scattering is only a little bit even at low stresses and long times. The creep life of Gr.92 can be predicted by evaluating the min, together with the ε r evaluated from the stress and or min dependence.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
包含总应变的Gr.92的蠕变延性和修正的Monkman-Grant方程
本文利用NIMS蠕变数据表中的蠕变数据,对Gr.92进行了研究。与标准的Monkman-Grant公式相比,修正的Monkman-Grant方程可以提供更准确的预测蠕变断裂寿命的方法。在低应力和长时间条件下,tr与最小蠕变速率最小图(称为Monkman-Grant关系)向下偏离。用(t r /ε r)代替tr可以得到tr与最小应变的更好的相关性,其中ε r为总应变或断裂应变。在较宽的应力、温度和测试时间范围内,(t r /ε r)与最小值成反比,即使在低应力和长时间下,数据散射的幅度也很小。Gr.92的蠕变寿命可以通过求最小值和由应力和最小依赖关系求出的ε r来预测。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Materials at High Temperatures
Materials at High Temperatures 工程技术-材料科学:综合
CiteScore
1.90
自引率
15.40%
发文量
58
审稿时长
>12 weeks
期刊介绍: Materials at High Temperatures welcomes contributions relating to high temperature applications in the energy generation, aerospace, chemical and process industries. The effects of high temperatures and extreme environments on the corrosion and oxidation, fatigue, creep, strength and wear of metallic alloys, ceramics, intermetallics, and refractory and composite materials relative to these industries are covered. Papers on the modelling of behaviour and life prediction are also welcome, provided these are validated by experimental data and explicitly linked to actual or potential applications. Contributions addressing the needs of designers and engineers (e.g. standards and codes of practice) relative to the areas of interest of this journal also fall within the scope. The term ''high temperatures'' refers to the subsequent temperatures of application and not, for example, to those of processing itself. Materials at High Temperatures publishes regular thematic issues on topics of current interest. Proposals for issues are welcomed; please contact one of the Editors with details.
期刊最新文献
Effect of concave–convex degree of substrate surface on thermal shock performance of Cr coating Estimating the Monkman−Grant relation in the presence of errors in measurement of times to failure and minimum creep rates: with application to some high temperature materials Comparative assessment of a continuum damage mechanics-based creep damage models for India-specific RAFM steel A comparison of hyperbolic sine creep life equations and data correlation methods for these equations Microstructure evolution of Incoloy 800H in industrial environment and correlation with creep mechanisms from literature
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1