Pressure Sensitivity Evaluation of Passive SAW Microsensor Integrated with Pressure-Temperature and ID Tag on 41°-YX LiNbO3

Wen Wang, Keekeun Lee, Taehyun Kim, Sangsik Yang, I. Park
{"title":"Pressure Sensitivity Evaluation of Passive SAW Microsensor Integrated with Pressure-Temperature and ID Tag on 41°-YX LiNbO3","authors":"Wen Wang, Keekeun Lee, Taehyun Kim, Sangsik Yang, I. Park","doi":"10.1109/SENSOR.2007.4300538","DOIUrl":null,"url":null,"abstract":"This paper presents a mechanical analysis on pressure sensitivity of a passive pressure sensor incorporating surface acoustic wave (SAW) reflective delay line (RDL) on 41deg-YX LiNbO3. The behavior of shear horizontal (SH) leaky type SAW propagating on pre-stressed LiNbO3 substrate was investigated using partial-wave-analysis. Referring to the finite element methods (FEM), the pressure sensitivity in the propagation path of SAW was calculated and the effect of the diaphragm thickness on the sensor performance was also studied, which shows proper thickness of LiNbO3 diaphragm makes it possible to obtain better sensitivity than quartz. Theoretical results were verified by the sensor experiment. We have developed a pressure sensor on 41deg-YX LiNbO3 integrated with temperature sensor and 8-bits ID tag, which was structured by 440 MHz two-layered-RDL, in which a - 150 mum cavity was designed by Ni electroplating. Fabricated sensor was wirelessly characterized by HP network analyzer. High S/N was observed from the measured S11. Satisfactory pressure sensitivity of -2.9deg/kPa was obtained.","PeriodicalId":23295,"journal":{"name":"TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2007-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"7","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/SENSOR.2007.4300538","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 7

Abstract

This paper presents a mechanical analysis on pressure sensitivity of a passive pressure sensor incorporating surface acoustic wave (SAW) reflective delay line (RDL) on 41deg-YX LiNbO3. The behavior of shear horizontal (SH) leaky type SAW propagating on pre-stressed LiNbO3 substrate was investigated using partial-wave-analysis. Referring to the finite element methods (FEM), the pressure sensitivity in the propagation path of SAW was calculated and the effect of the diaphragm thickness on the sensor performance was also studied, which shows proper thickness of LiNbO3 diaphragm makes it possible to obtain better sensitivity than quartz. Theoretical results were verified by the sensor experiment. We have developed a pressure sensor on 41deg-YX LiNbO3 integrated with temperature sensor and 8-bits ID tag, which was structured by 440 MHz two-layered-RDL, in which a - 150 mum cavity was designed by Ni electroplating. Fabricated sensor was wirelessly characterized by HP network analyzer. High S/N was observed from the measured S11. Satisfactory pressure sensitivity of -2.9deg/kPa was obtained.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
41°-YX LiNbO3上集成压力-温度和ID标签的被动SAW微传感器压力灵敏度评价
本文对采用表面声波(SAW)反射延迟线(RDL)的41°yx LiNbO3型被动压力传感器的压力灵敏度进行了力学分析。采用部分波分析方法研究了剪切水平(SH)泄漏型声表面波在预应力LiNbO3衬底上的传播行为。采用有限元法计算了声表面波传播路径的压力灵敏度,并研究了膜片厚度对传感器性能的影响,结果表明,适当厚度的LiNbO3膜片可以获得比石英更好的灵敏度。通过传感器实验验证了理论结果。我们开发了一种基于41deg-YX LiNbO3的压力传感器,该传感器集成了温度传感器和8位ID标签,该传感器采用440 MHz双层rdl结构,其中采用Ni电镀设计了- 150 mum腔体。利用HP网络分析仪对制作的传感器进行了无线表征。从测量的S11中观察到高信噪比。获得了满意的压力灵敏度-2.9°/kPa。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
A Biaxially Stretchable Interconnect with Liquid Alloy Joints on Flexible Substrate Analysis of Heavy Metal Ions in Real Samples using a Concentrator Device with a Super-Hydrophobic Surface Sliding Contact Micro-Bearing for Nano-Precision Sensing and Positioning Self-Sensing Quartz-Crystal Cantilever for Nanometric Sensing Fabrication and Characterization of a Hydrogen Sensor Based on Palladium Nanowires
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1