Microwave Characterization of Silicon Carbide Sample at the ISM Band from 25°C to 165°C

W. Rammal, Jamal Rammal, Farah Salameh, M. Taoubi, J. Fouany, Alaa Alchaddoud, L. Canale
{"title":"Microwave Characterization of Silicon Carbide Sample at the ISM Band from 25°C to 165°C","authors":"W. Rammal, Jamal Rammal, Farah Salameh, M. Taoubi, J. Fouany, Alaa Alchaddoud, L. Canale","doi":"10.4172/2325-9833.1000160","DOIUrl":null,"url":null,"abstract":"This article presents a microwave characterization at the ISM band (2.45 GHz) for the dielectric properties of a Silicon Carbide sample with high loss tangent from 25°C to 165°C. Different techniques were used to characterize the SiC sample: the cylindrical resonant cavity technique in transmission and reflection mode, the microstrip ring resonator and finally the near field microwave microscopy. The results obtained by the cylindrical resonant cavity (transmissionand reflection) are in good agreement, the relative permittivity and the loss tangent of the SiC increase with temperature by 48% and 190% respectively between 25°C and 165°C. These techniques are accurate but need two thermal cycles. The results obtained by the microstrip ring resonator are less accurate than the resonant cavity and the low quality factor (Q0=2.5) does not allow to correctly determine the imaginary part of the permittivity and consequently, the loss tangent. Finally, the near field microwave microscopy technique shows an accurate measurement with low uncertainties in the real (<2%) and imaginary part (<5%) of the permittivity. These results are in good agreement with the resonant cavity techniques, however this technique needs just one thermal cycle which allows saving time during the measurements.","PeriodicalId":44634,"journal":{"name":"SAE International Journal of Passenger Cars-Electronic and Electrical Systems","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2018-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"SAE International Journal of Passenger Cars-Electronic and Electrical Systems","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.4172/2325-9833.1000160","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 1

Abstract

This article presents a microwave characterization at the ISM band (2.45 GHz) for the dielectric properties of a Silicon Carbide sample with high loss tangent from 25°C to 165°C. Different techniques were used to characterize the SiC sample: the cylindrical resonant cavity technique in transmission and reflection mode, the microstrip ring resonator and finally the near field microwave microscopy. The results obtained by the cylindrical resonant cavity (transmissionand reflection) are in good agreement, the relative permittivity and the loss tangent of the SiC increase with temperature by 48% and 190% respectively between 25°C and 165°C. These techniques are accurate but need two thermal cycles. The results obtained by the microstrip ring resonator are less accurate than the resonant cavity and the low quality factor (Q0=2.5) does not allow to correctly determine the imaginary part of the permittivity and consequently, the loss tangent. Finally, the near field microwave microscopy technique shows an accurate measurement with low uncertainties in the real (<2%) and imaginary part (<5%) of the permittivity. These results are in good agreement with the resonant cavity techniques, however this technique needs just one thermal cycle which allows saving time during the measurements.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
碳化硅样品在25°C至165°C的ISM波段的微波特性
本文在ISM波段(2.45 GHz)对25°C至165°C的高损耗碳化硅样品的介电特性进行了微波表征。采用不同的技术对SiC样品进行表征:透射和反射模式下的圆柱谐振腔技术、微带环形谐振腔技术和近场微波显微镜技术。在25 ~ 165℃范围内,SiC的相对介电常数和损耗正切随温度的升高分别增加了48%和190%。这些技术是精确的,但需要两个热循环。微带环形谐振器获得的结果不如谐振腔精确,并且低质量因子(Q0=2.5)不允许正确确定介电常数的虚部,从而无法确定损耗正切。最后,利用近场微波显微镜技术对介电常数的实部(<2%)和虚部(<5%)进行了精确的测量。这些结果与谐振腔技术很好地一致,但是这种技术只需要一个热循环,从而节省了测量期间的时间。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
2.10
自引率
0.00%
发文量
0
期刊最新文献
Characteristics Analyses of Innovative Crank-Lever Electromagnetic Damper for Suspension System of an Off-Road Vehicle Impact of Rear Spoiler on Vehicle Braking Longitudinal Dynamics On the Drag Reduction Optimization of the DrivAer Fastback Model Car with Digital Side Mirror Model Predictive Control of an Automotive Driveline for Optimal Torque Delivery with Minimal Oscillations during Torque Converter Slipping Conditions Aerodynamic Characterization of a Full-Scale Compact Car Exposed to Transient Crosswind
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1