Semianalytical Model for Monitoring Fracture Liquid-Loading in Vertical Fractured Gas Wells

Abstract

Liquid loading seriously affects gas wells production and even causes gas wells abandonment. Many researchers still focus on correcting a critical liquid-loading flow rate to alleviate these problems. However, they still cannot reasonably be explained. Gas flow rate is higher than the critical liquid-loading flow rate, but liquid loading can still occur. Therefore, until an accurate critical fluid-loading flow rate is discovered, we should monitor the fluid-loading phenomenon to prevent it from affecting production gas wells’ performance. In this work, a fracture liquid-loading monitoring (FLLM) model is proposed and solved for the timely monitoring of fracture liquid-loading (FLL) positions and volume. The Newman product and Green function methods are used to develop and solve the FLLM model. The fracture is discretized into 2nxnz grids to describe an FLL volume and position. The numerical simulation method is used to verify the accuracy of the FLLM model. As a result, four innovative flow regimes, including fracture cavity liquid-loading flow, fracture root liquid-loading flow, transitional flow considering fracture cavity liquid-loading flow, and transitional flow considering fracture root liquid-loading flow, are identified on the pressure response curves. The pressure response of the same gas well at different times is well matched by the model in this paper, and the obtained parameters are more reasonable. The FLLM model can correct for magnified permeability, shortened half-length, and magnified wellbore storage coefficient. In conclusion, the FLLM model is established to monitor FLL, and alert engineers to remove liquid loading on time to prevent water from suddenly rushing into a wellbore and causing gas wells abandonment.