Effect of junction disclinations on crack nucleation during induced grain boundary sliding

S. Kirikov, V. Perevezentsev, A. Pupynin
{"title":"Effect of junction disclinations on crack nucleation during induced grain boundary sliding","authors":"S. Kirikov, V. Perevezentsev, A. Pupynin","doi":"10.31044/1814-4632-2023-2-2-11","DOIUrl":null,"url":null,"abstract":"The nucleation of a microcrack in the grain junction of grains due to induced athermal grain boundary sliding under the action of stresses from the accumulation of virtual dislocations of planar shear mesodefect, stresses from junction disclinations and external stress is considered. It is shown that the existing criteria do not allow us to take into account the influence of the stress field of the junction disclination on the crack nucleation. A new energy criterion based on the concept of spontaneous crack nucleation of the minimum possible length for a crystalline body is proposed. Using this criterion, an analysis of the conditions necessary for the crack nucleation has been carried out. The dependences of the critical value of an external load required for crack nucleation on the strength of junction disclinations at different values of the parameters of the fragmented structure of material (the size of the boundaries of fragments and the strength of rotational-shear mesodefects) and the threshold stress of athermal sliding were obtained. It is shown that the presence of a sufficiently high-strength negative disclination at the grain junction can significantly facilitate the nucleation of a crack.","PeriodicalId":11136,"journal":{"name":"Deformation and Fracture of Materials","volume":"482 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Deformation and Fracture of Materials","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31044/1814-4632-2023-2-2-11","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

The nucleation of a microcrack in the grain junction of grains due to induced athermal grain boundary sliding under the action of stresses from the accumulation of virtual dislocations of planar shear mesodefect, stresses from junction disclinations and external stress is considered. It is shown that the existing criteria do not allow us to take into account the influence of the stress field of the junction disclination on the crack nucleation. A new energy criterion based on the concept of spontaneous crack nucleation of the minimum possible length for a crystalline body is proposed. Using this criterion, an analysis of the conditions necessary for the crack nucleation has been carried out. The dependences of the critical value of an external load required for crack nucleation on the strength of junction disclinations at different values of the parameters of the fragmented structure of material (the size of the boundaries of fragments and the strength of rotational-shear mesodefects) and the threshold stress of athermal sliding were obtained. It is shown that the presence of a sufficiently high-strength negative disclination at the grain junction can significantly facilitate the nucleation of a crack.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
晶界诱导滑动过程中结界位错对裂纹形核的影响
考虑了在平面剪切细观缺陷虚拟位错积累应力、结合部位错应力和外部应力的作用下,晶界非热滑动引起的晶界微裂纹的形核。结果表明,现有的准则不能考虑结斜向应力场对裂纹形核的影响。基于晶体最小可能长度自发裂纹形核的概念,提出了一种新的能量判据。利用这一准则,对裂纹形核的必要条件进行了分析。得到了裂纹成核所需的外载荷临界值与材料破碎结构参数(破碎边界尺寸和旋转-剪切介观缺陷强度)不同值下结斜向强度和非热滑动阈值应力的关系。结果表明,在晶界处存在足够高强度的负斜向能显著促进裂纹的形核。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Formation of hardened surface layer of structural carbon steel St3 gears during laser cutting Microstructure and crystallographic texture of ferritic-pearlitic steel subjected to fatigue failure Influence of intrinsic residual stresses on resistance of welded joint to brittle fracture Mechanical properties of solid solutions based on p- and n-type bismuth telluride doped with graphene Experimental study and theoretical analysis of stability loss of titanium nickelide plates, caused by direct thermoelastic phase transformation under action of compressive load
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1