An Inclusive Study on the Effect of Strain Rate on the Stress-Strain Behavior and the Undrained Shear Strength of Clay Soils in Kombolcha, Ethiopia

IF 1.5 0 ENGINEERING, MULTIDISCIPLINARY Engineering, Technology & Applied Science Research Pub Date : 2022-02-12 DOI:10.48084/etasr.4626
S. Mohammed, D. Dirate, D. K. Dasho, R. K. Verma, V. R. Pampana, R. B. Sangalang, A. Koshuma, A. Ayalew
{"title":"An Inclusive Study on the Effect of Strain Rate on the Stress-Strain Behavior and the Undrained Shear Strength of Clay Soils in Kombolcha, Ethiopia","authors":"S. Mohammed, D. Dirate, D. K. Dasho, R. K. Verma, V. R. Pampana, R. B. Sangalang, A. Koshuma, A. Ayalew","doi":"10.48084/etasr.4626","DOIUrl":null,"url":null,"abstract":"This research aims to study the effect of strain rate on the stress-strain association and shear strength of clay soils in Kombolcha, Ethiopia. Field and laboratory experimentations were conducted on 3 soil samples collected at 4.5m depth, considering the physical and engineering properties of the soil. Unconsolidated, undrained triaxial compression tests were performed under confining pressure on the specimens that were axially loaded at a rate of strain varying from 0.38mm/min to 1.14mm/min by taking 2 points above and below 1% of the specimen height. Stress-strain relations were developed under the stated different rates of strains to describe their effect. It was revealed that the strain rate effect was observed. By increasing the strain rate shifts the stress-strain curve upward, and the corresponding shear strength of the soil also increased under effective stress. Accordingly, the strain rate increased the shear parameters. The average angle of friction increased by 13.43%, 15.08%, 13.18%, and 14.33% when the rate of strain changed from 0.38 to 0.57mm/min, 0.57 to 0.76mm/min, 0.76 to 0.95mm/min, and 0.95 to 1.14mm/min respectively, while the average cohesion increased by 17.67%, 19.52%, 14.87%, and 16.48%. The failure at strain rate 1%/min of sample height (0.76mm/min) was uniformly distributed and there was uniform pore pressure distribution throughout the sample height. The effect is slightly more when the shear strength increased at the left side than at the right side. Average shear strength parameters such as cohesion and angle friction were recorded for strain rates from 0.57mm/min to 1.25mm/min specifically for the clay soils found in Kombolcha town, Ethiopia.","PeriodicalId":11826,"journal":{"name":"Engineering, Technology & Applied Science Research","volume":null,"pages":null},"PeriodicalIF":1.5000,"publicationDate":"2022-02-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Engineering, Technology & Applied Science Research","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.48084/etasr.4626","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"0","JCRName":"ENGINEERING, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

This research aims to study the effect of strain rate on the stress-strain association and shear strength of clay soils in Kombolcha, Ethiopia. Field and laboratory experimentations were conducted on 3 soil samples collected at 4.5m depth, considering the physical and engineering properties of the soil. Unconsolidated, undrained triaxial compression tests were performed under confining pressure on the specimens that were axially loaded at a rate of strain varying from 0.38mm/min to 1.14mm/min by taking 2 points above and below 1% of the specimen height. Stress-strain relations were developed under the stated different rates of strains to describe their effect. It was revealed that the strain rate effect was observed. By increasing the strain rate shifts the stress-strain curve upward, and the corresponding shear strength of the soil also increased under effective stress. Accordingly, the strain rate increased the shear parameters. The average angle of friction increased by 13.43%, 15.08%, 13.18%, and 14.33% when the rate of strain changed from 0.38 to 0.57mm/min, 0.57 to 0.76mm/min, 0.76 to 0.95mm/min, and 0.95 to 1.14mm/min respectively, while the average cohesion increased by 17.67%, 19.52%, 14.87%, and 16.48%. The failure at strain rate 1%/min of sample height (0.76mm/min) was uniformly distributed and there was uniform pore pressure distribution throughout the sample height. The effect is slightly more when the shear strength increased at the left side than at the right side. Average shear strength parameters such as cohesion and angle friction were recorded for strain rates from 0.57mm/min to 1.25mm/min specifically for the clay soils found in Kombolcha town, Ethiopia.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
应变速率对埃塞俄比亚Kombolcha粘土应力-应变特性及不排水抗剪强度影响的综合研究
本研究旨在研究应变速率对埃塞俄比亚Kombolcha粘土的应力-应变关联和抗剪强度的影响。考虑到土壤的物理和工程性质,对3个4.5m深度的土样进行了现场和室内试验。在轴向加载速率为0.38mm/min ~ 1.14mm/min的试件上,取试件高度1%以上和1%以下2个点,在围压条件下进行未固结不排水三轴压缩试验。在规定的不同应变速率下建立了应力-应变关系,以描述其影响。结果表明,存在应变速率效应。随着应变速率的增大,应力-应变曲线上移,有效应力作用下土体抗剪强度相应增大。相应的,应变速率增大了剪切参数。应变速率从0.38 ~ 0.57mm/min、0.57 ~ 0.76mm/min、0.76 ~ 0.95mm/min和0.95 ~ 1.14mm/min时,平均摩擦角分别增加了13.43%、15.08%、13.18%和14.33%,黏聚力平均增加了17.67%、19.52%、14.87%和16.48%。试样高度应变速率为1%/min (0.76mm/min)时的破坏分布均匀,孔隙压力在整个试样高度上分布均匀。当抗剪强度在左侧增加时,其影响略大于右侧。在埃塞俄比亚Kombolcha镇发现的粘土中,在应变速率为0.57mm/min至1.25mm/min的情况下,记录了黏聚力和角摩擦等平均抗剪强度参数。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Engineering, Technology & Applied Science Research
Engineering, Technology & Applied Science Research ENGINEERING, MULTIDISCIPLINARY-
CiteScore
3.00
自引率
46.70%
发文量
222
审稿时长
11 weeks
期刊最新文献
Malware Attack Detection in Large Scale Networks using the Ensemble Deep Restricted Boltzmann Machine Enhancement of Power System Security by the Intelligent Control of a Static Synchronous Series Compensator Mix Design of Fly Ash and GGBS based Geopolymer Concrete activated with Water Glass A New Approach on the Egyptian Black Sand Ilmenite Alteration Processes Boric Acid as a Safe Insecticide for Controlling the Mediterranean Fruit Fly Ceratitis Capitata Wiedemann (Diptera: Tephritidae)
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1