Pre-deformation and Aging Characteristics of Cu-3Ti-2Mg Alloy

IF 0.6 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY 稀有金属材料与工程 Pub Date : 2018-07-01 DOI:10.1016/S1875-5372(18)30168-1
Liu Jia, Wang Xianhui, Ran Qianni, Liu Yanfeng, Li Cong
{"title":"Pre-deformation and Aging Characteristics of Cu-3Ti-2Mg Alloy","authors":"Liu Jia,&nbsp;Wang Xianhui,&nbsp;Ran Qianni,&nbsp;Liu Yanfeng,&nbsp;Li Cong","doi":"10.1016/S1875-5372(18)30168-1","DOIUrl":null,"url":null,"abstract":"<div><p>The effect of cold deformation and aging on the microstructure and properties of Cu-3Ti-2Mg alloy was investigated. The microstructure and phase constituents were characterized by optical microscope (OM), scanning electron microscope (SEM), X-ray diffractometer (XRD), transmission electron microscope (TEM) and electron backscattering diffraction (EBSD), and the hardness and electrical conductivity were measured as well. The results show that the microstructure of as-cast Cu-3Ti-2Mg alloy consists of Cu<sub>2</sub>Mg phase, plate-like Cu<sub>4</sub>Ti phase and Cu matrix. The microstructural characterizations reveal that the <em>βprime;</em>-Cu<sub>4</sub>Ti phase precipitates from the supersaturated Cu matrix during aging. However, excessive aging causes the phase transformation from metastable, coherent <em>βprime;</em>-Cu<sub>4</sub>Ti to equilibrium, incoherent Cu<sub>3</sub>Ti phases. In the range of experiments, the optimum process for Cu-3Ti-2Mg alloy is solutizing at 700 °C for 4 h, cold deformation of 60%, and aging at 450 °C for 2 h. The electrical conductivity and hardness HV of Cu-3Ti-2Mg alloy are 16.7 %IACS and 3280 MPa, respectively.</p></div>","PeriodicalId":21056,"journal":{"name":"稀有金属材料与工程","volume":"47 7","pages":"Pages 1980-1985"},"PeriodicalIF":0.6000,"publicationDate":"2018-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S1875-5372(18)30168-1","citationCount":"4","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"稀有金属材料与工程","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1875537218301681","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 4

Abstract

The effect of cold deformation and aging on the microstructure and properties of Cu-3Ti-2Mg alloy was investigated. The microstructure and phase constituents were characterized by optical microscope (OM), scanning electron microscope (SEM), X-ray diffractometer (XRD), transmission electron microscope (TEM) and electron backscattering diffraction (EBSD), and the hardness and electrical conductivity were measured as well. The results show that the microstructure of as-cast Cu-3Ti-2Mg alloy consists of Cu2Mg phase, plate-like Cu4Ti phase and Cu matrix. The microstructural characterizations reveal that the βprime;-Cu4Ti phase precipitates from the supersaturated Cu matrix during aging. However, excessive aging causes the phase transformation from metastable, coherent βprime;-Cu4Ti to equilibrium, incoherent Cu3Ti phases. In the range of experiments, the optimum process for Cu-3Ti-2Mg alloy is solutizing at 700 °C for 4 h, cold deformation of 60%, and aging at 450 °C for 2 h. The electrical conductivity and hardness HV of Cu-3Ti-2Mg alloy are 16.7 %IACS and 3280 MPa, respectively.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Cu-3Ti-2Mg合金的预变形与时效特性
研究了冷变形和时效对Cu-3Ti-2Mg合金组织和性能的影响。采用光学显微镜(OM)、扫描电镜(SEM)、x射线衍射仪(XRD)、透射电镜(TEM)和电子背散射衍射仪(EBSD)对其微观结构和相组成进行了表征,并对其硬度和电导率进行了测定。结果表明:铸态Cu- 3ti - 2mg合金的显微组织由Cu2Mg相、片状Cu4Ti相和Cu基体组成;显微组织表征表明,在时效过程中,从过饱和Cu基体中析出β′-Cu4Ti相。然而,过度时效导致相变从亚稳的、共相干的βprime;-Cu4Ti转变为平衡的、非共相干的Cu3Ti相。在实验范围内,Cu-3Ti-2Mg合金的最佳工艺为700℃固溶4h,冷变形60%,450℃时效2h。Cu-3Ti-2Mg合金的电导率和硬度HV分别为16.7% IACS和3280 MPa。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
稀有金属材料与工程
稀有金属材料与工程 工程技术-材料科学:综合
CiteScore
1.30
自引率
57.10%
发文量
17973
审稿时长
4.2 months
期刊介绍:
期刊最新文献
High Temperature Oxidation Behavior of Co-Cr-Y2O3 Modified Aluminide Coatings on Ni-based Superalloy by Pack Cementation Process First-principles Study on Effect of Pressure and Temperature on Mechanical, Thermodynamic Properties, and Electronic Structure of Ni3Al Alloy Numerical Simulation of the Influence of Electrode Shrinkage Cavity on ESR Process of IN718 Alloy Friction and Wear Performance of in-Situ (TiC+TiB)/Ti6Al4V Composites Effect of Benzotriazole on Corrosion Resistance of Al2O3/Cerium Oxide Composite Films on the Al Surface
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1