Influence of impurity and alloying elements on high temperature oxidation resistance of E110 type zirconium alloys

A. Rozhnov, S. Nikulin, V. Belov, E. Li
{"title":"Influence of impurity and alloying elements on high temperature oxidation resistance of E110 type zirconium alloys","authors":"A. Rozhnov, S. Nikulin, V. Belov, E. Li","doi":"10.31044/1814-4632-2021-4-27-32","DOIUrl":null,"url":null,"abstract":"The structural-phase state has been investigated and content of oxygen and hydrogen in the E110 type alloy after high-temperature oxidation simulating an accident of the LOCA type has been determined. Tubular samples with a diameter of 9.13 mm and a wall thickness of 0.7 mm from the Zr—1% Nb alloy obtained on the electrolytic zirconium basis (E110), the zirconium sponge basis (E110G), and from a modified alloy Zr—1% Nb—0.12% Fe—0.13% O (E110M) were selected for the study. The samples were subjected to a steam oxidation at a temperature of 1100 °C to 18% local oxidation depth. It was found that the E110G alloy based on a zirconium sponge absorbed oxygen and hydrogen less under LOCA conditions.","PeriodicalId":11136,"journal":{"name":"Deformation and Fracture of Materials","volume":"13 2 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Deformation and Fracture of Materials","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31044/1814-4632-2021-4-27-32","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

The structural-phase state has been investigated and content of oxygen and hydrogen in the E110 type alloy after high-temperature oxidation simulating an accident of the LOCA type has been determined. Tubular samples with a diameter of 9.13 mm and a wall thickness of 0.7 mm from the Zr—1% Nb alloy obtained on the electrolytic zirconium basis (E110), the zirconium sponge basis (E110G), and from a modified alloy Zr—1% Nb—0.12% Fe—0.13% O (E110M) were selected for the study. The samples were subjected to a steam oxidation at a temperature of 1100 °C to 18% local oxidation depth. It was found that the E110G alloy based on a zirconium sponge absorbed oxygen and hydrogen less under LOCA conditions.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
杂质及合金元素对E110型锆合金高温抗氧化性能的影响
研究了模拟LOCA型事故高温氧化后E110型合金的结构相态,测定了其氧和氢的含量。采用电解锆基(E110)、海绵锆基(E110G)和改性Zr-1% Nb合金(E110M)制备了直径为9.13 mm、壁厚为0.7 mm的管状试样。样品在1100℃至18%的局部氧化深度下进行蒸汽氧化。结果表明,海绵锆基E110G合金在LOCA条件下对氧和氢的吸附较少。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Formation of hardened surface layer of structural carbon steel St3 gears during laser cutting Microstructure and crystallographic texture of ferritic-pearlitic steel subjected to fatigue failure Influence of intrinsic residual stresses on resistance of welded joint to brittle fracture Mechanical properties of solid solutions based on p- and n-type bismuth telluride doped with graphene Experimental study and theoretical analysis of stability loss of titanium nickelide plates, caused by direct thermoelastic phase transformation under action of compressive load
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1