{"title":"Effect of Debonding of Rebars on the Seismic Response of Boundary Elements of Lightly Reinforced Shear Walls","authors":"A. Sharifzadeh, S. Tariverdilo","doi":"10.22075/JRCE.2020.19626.1375","DOIUrl":null,"url":null,"abstract":"Rebar fracture in boundary elements of lightly reinforced shear walls in recent earthquake motivated research on the minimum longitudinal reinforcement applicable to shear walls. These researches lead to change in the ACI 318-19 requirement for minimum longitudinal reinforcement in boundary elements. New ACI 318 requirement increase minimum longitudinal reinforcement ratio for boundary elements of shear walls with low demand, that could have economic burden. This study experimentally investigates is it possible to avoid this increase in minimum rebar by debonding rebars in lightly reinforced shear walls. Tests includes specimens with bonded and debonded rebars, which are tested under monotonic and cyclic loading. Load protocol to account for failure types of low reinforcement shear walls is unsymmetric. Test results show that out of plane buckling of specimens with debonded rebars initiates at lower axial strains that could be attributed to reduction in lateral stiffness due to use of debonding. On the other hand debonding resulted in reduction of local strain demand on rebar. It could be concluded that larger minimum dimension for boundary elements will be required when debonding is employed","PeriodicalId":52415,"journal":{"name":"Journal of Rehabilitation in Civil Engineering","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2020-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Rehabilitation in Civil Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.22075/JRCE.2020.19626.1375","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0
Abstract
Rebar fracture in boundary elements of lightly reinforced shear walls in recent earthquake motivated research on the minimum longitudinal reinforcement applicable to shear walls. These researches lead to change in the ACI 318-19 requirement for minimum longitudinal reinforcement in boundary elements. New ACI 318 requirement increase minimum longitudinal reinforcement ratio for boundary elements of shear walls with low demand, that could have economic burden. This study experimentally investigates is it possible to avoid this increase in minimum rebar by debonding rebars in lightly reinforced shear walls. Tests includes specimens with bonded and debonded rebars, which are tested under monotonic and cyclic loading. Load protocol to account for failure types of low reinforcement shear walls is unsymmetric. Test results show that out of plane buckling of specimens with debonded rebars initiates at lower axial strains that could be attributed to reduction in lateral stiffness due to use of debonding. On the other hand debonding resulted in reduction of local strain demand on rebar. It could be concluded that larger minimum dimension for boundary elements will be required when debonding is employed