Evaluation of structural adhesive joints fracture toughness without crack measurement

IF 0.5 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Materia-rio De Janeiro Pub Date : 2021-01-25 DOI:10.1590/S1517-707620210001.1217
Jonnas Santos Alves, P. Kenedi, S. Barros
{"title":"Evaluation of structural adhesive joints fracture toughness without crack measurement","authors":"Jonnas Santos Alves, P. Kenedi, S. Barros","doi":"10.1590/S1517-707620210001.1217","DOIUrl":null,"url":null,"abstract":"The adhesive fracture resistance of structural adhesive joints in mode II, IIC, is accessed through the application of two models that prescind of the measurement of the crack length during the subjection of ENF specimens to three-point bending monotonic tests. The load vs transversal displacement results are used in two different approaches: a damage model and a cohesive zone model. The first one was used in test where the crack propagation was unstable and the second one was used for stable crack propagations. These initial results show the viability of the models and show that both: initial crack length and transversal load rate; have great influence in IIC evaluation. Keywords: structural adhesive joints, ENF specimens, fracture mechanics.","PeriodicalId":18260,"journal":{"name":"Materia-rio De Janeiro","volume":null,"pages":null},"PeriodicalIF":0.5000,"publicationDate":"2021-01-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materia-rio De Janeiro","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1590/S1517-707620210001.1217","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 2

Abstract

The adhesive fracture resistance of structural adhesive joints in mode II, IIC, is accessed through the application of two models that prescind of the measurement of the crack length during the subjection of ENF specimens to three-point bending monotonic tests. The load vs transversal displacement results are used in two different approaches: a damage model and a cohesive zone model. The first one was used in test where the crack propagation was unstable and the second one was used for stable crack propagations. These initial results show the viability of the models and show that both: initial crack length and transversal load rate; have great influence in IIC evaluation. Keywords: structural adhesive joints, ENF specimens, fracture mechanics.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
无裂纹测量的结构粘接断裂韧性评价
采用两种模型对ENF试件进行三点弯曲单调试验时的裂纹长度进行测量,得到了II型(IIC)结构粘接接头的抗粘接断裂性能。荷载与横向位移的结果采用了两种不同的方法:损伤模型和粘聚区模型。前者用于裂纹扩展不稳定的试验,后者用于裂纹扩展稳定的试验。这些初步结果表明了模型的可行性,并表明:初始裂纹长度和横向荷载率;对IIC的评价有很大的影响。关键词:结构粘接,ENF试样,断裂力学。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Materia-rio De Janeiro
Materia-rio De Janeiro MATERIALS SCIENCE, MULTIDISCIPLINARY-
CiteScore
1.00
自引率
25.00%
发文量
51
审稿时长
6 weeks
期刊介绍: All the articles are submitted to a careful peer-reviewing evaluation process by the journal''s Editorial Board. The Editorial Board, reviewers and authors make use of a web based proprietary automated tool to deal with the reviewing procedures.the Revista Matéria''s article reviewing restricted access system - SEER. Authors are not informed about the identity of the reviewers.
期刊最新文献
Structural performance of hybrid FRP laminates on concrete beams made with manufactured sand Incorporação de fibras de papel kraft provenientes de embalagens de cimento pós-uso para produção de pisogramas de concreto Synthesized activated carbon derived from discarded styrofoam and effectively removal of nickel (II) from aqueous solutions The effect of chloride, sulfate, and ammonium ions on the semiconducting behavior and corrosion resistance of AISI 304 stainless steel passive film Mechanical properties of asphalt mixtures containing reclaimed asphalt incorporating Acrylonitrile Butadiene Styrene (ABS)
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1