Another Explanation About the Transistor as an Amplifier

S. Eid
{"title":"Another Explanation About the Transistor as an Amplifier","authors":"S. Eid","doi":"10.7176/apta/78-04","DOIUrl":null,"url":null,"abstract":"We reached to an explanation for the small voltage turning out to be large one in the transistor. Our explanation is based on the repelling energy among electrons bearing the same negative charge when two currents of them n and n meet coming from the shared half between two circuits one reverse to the other forming the transistor, this shared half between the two circuits is known as the base, in n-p-n or in the other direction in the transistor as p-n-p. p and n are nothing but the negative and positive poles in one circuit, whit two circuits one is reverse to the other in direction, then no escape from the repelling meeting between two groups of electrons bearing the same negative charge.  The number of the electrons has nothing to do with the small voltage turns out to be large one in the transistor, again only the meeting between two currents bearing the same negative charges where each current repel the other current strongly in the two shared circuits forming the transistor. 1-       The usual explanation of the transistor as an amplifier: Let us here continue showing more explanation about the transistor as an amplifier. I her choose the clearer one I have ever found in this field. The transistor  consists of two PN diodes connected back to back. It has three terminals namely emitter, base and collector. The base is the middle section which is made up of thin layer. The right part of the diode is called emitter-base diode, and the left part is called collector-base diode. The emitter based junction of the transistor is connected to forward bias and the collector- base junction is connected in reverse bias which offers a high resistance. When the emitter junction is in forward biased and the collector junction is in reverse bias , then it is said to be in the active region. Thus the transistor has two junctions which can be biased in different ways. The collector current is depend on the emitter current. This emitter current caused by the input signal contributes the collector current , which when flows through the load resistance results in a large voltage drop across it. Therefore a small input voltage results in a large output voltage showing that the transistor works as an amplifier (1) . In fact this explanation is also not enough or useful for describing the work of the transistor as an amplifier. It is well known that usually silicon is used for making the transistor because of its high voltage rating greater current and less temperature sensitivity. 2-       The other explanation about the transistor as an amplifier : The transistor is nothing but electrons moving between two circles, any circle in the universe consists of two equal and opposite halves one of them is negative n, the other relative to the other circle is positive p, if there is only one circle, then the electrons in one directed current will move their normal motion between the two opposite halves n and p in the circle or the previously mentioned diode, but when another circle or diode shares the first one in one half being positive p or negative n , we have then( n- p- n)  or ( p- n- p) . When electrons enter the shared half between the two circles p or n, then they will  go through the two similar halves in the two circles in the same time, and because they are particles bearing the same charge then the two currents will repel each other strongly, n with n or p with p and this results in enlarging the entering voltage , this situation makes us remember the last layer in the structure of the Sun called the corona where after the hydrogen surface of the Sun, electrons no longer are attached to their protons and therefore one layer of free electrons and free protons is formed , as electrons are the lighter they are the faster. Now there is one layer of electrons only, because all of them bearing the same negative charge every electron will repel another electron resulting in a high degree of temperature ranges from one million to millions of kelvens (2) , when our Earth faces the Sun through its daily motion around its axis these free energetic electrons hit the gaseous envelope of the Earth causing the light of the day in this face of the Earth (3) . Similarly two currents of free electrons meet in the two shared circles of the transistor repel each other strongly resulting in very great voltage comparing to the small voltage entering the transistor. Now, there is no need to use the holes theory in explaining the work of the transistor as amplifier, where the base current in the transistor causes the electrons to move into the collector region  creating  holes in the base region , the base therefore has less number of electrons comparing to the emitter, then the few electrons in the emitter are combined with the holes of the  base region and the remaining electrons are moved toward the collector region and constitute the collector current, the large collector current is obtained by varying the base region (4) . In fact such explanation is not useful at all in understanding the work of the transistor as an amplifier! DOI : 10.7176/APTA/78-04 Publication date :June 30 th 2019","PeriodicalId":7386,"journal":{"name":"Advances in Physics Theories and Applications","volume":"03 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2019-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Advances in Physics Theories and Applications","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.7176/apta/78-04","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

We reached to an explanation for the small voltage turning out to be large one in the transistor. Our explanation is based on the repelling energy among electrons bearing the same negative charge when two currents of them n and n meet coming from the shared half between two circuits one reverse to the other forming the transistor, this shared half between the two circuits is known as the base, in n-p-n or in the other direction in the transistor as p-n-p. p and n are nothing but the negative and positive poles in one circuit, whit two circuits one is reverse to the other in direction, then no escape from the repelling meeting between two groups of electrons bearing the same negative charge.  The number of the electrons has nothing to do with the small voltage turns out to be large one in the transistor, again only the meeting between two currents bearing the same negative charges where each current repel the other current strongly in the two shared circuits forming the transistor. 1-       The usual explanation of the transistor as an amplifier: Let us here continue showing more explanation about the transistor as an amplifier. I her choose the clearer one I have ever found in this field. The transistor  consists of two PN diodes connected back to back. It has three terminals namely emitter, base and collector. The base is the middle section which is made up of thin layer. The right part of the diode is called emitter-base diode, and the left part is called collector-base diode. The emitter based junction of the transistor is connected to forward bias and the collector- base junction is connected in reverse bias which offers a high resistance. When the emitter junction is in forward biased and the collector junction is in reverse bias , then it is said to be in the active region. Thus the transistor has two junctions which can be biased in different ways. The collector current is depend on the emitter current. This emitter current caused by the input signal contributes the collector current , which when flows through the load resistance results in a large voltage drop across it. Therefore a small input voltage results in a large output voltage showing that the transistor works as an amplifier (1) . In fact this explanation is also not enough or useful for describing the work of the transistor as an amplifier. It is well known that usually silicon is used for making the transistor because of its high voltage rating greater current and less temperature sensitivity. 2-       The other explanation about the transistor as an amplifier : The transistor is nothing but electrons moving between two circles, any circle in the universe consists of two equal and opposite halves one of them is negative n, the other relative to the other circle is positive p, if there is only one circle, then the electrons in one directed current will move their normal motion between the two opposite halves n and p in the circle or the previously mentioned diode, but when another circle or diode shares the first one in one half being positive p or negative n , we have then( n- p- n)  or ( p- n- p) . When electrons enter the shared half between the two circles p or n, then they will  go through the two similar halves in the two circles in the same time, and because they are particles bearing the same charge then the two currents will repel each other strongly, n with n or p with p and this results in enlarging the entering voltage , this situation makes us remember the last layer in the structure of the Sun called the corona where after the hydrogen surface of the Sun, electrons no longer are attached to their protons and therefore one layer of free electrons and free protons is formed , as electrons are the lighter they are the faster. Now there is one layer of electrons only, because all of them bearing the same negative charge every electron will repel another electron resulting in a high degree of temperature ranges from one million to millions of kelvens (2) , when our Earth faces the Sun through its daily motion around its axis these free energetic electrons hit the gaseous envelope of the Earth causing the light of the day in this face of the Earth (3) . Similarly two currents of free electrons meet in the two shared circles of the transistor repel each other strongly resulting in very great voltage comparing to the small voltage entering the transistor. Now, there is no need to use the holes theory in explaining the work of the transistor as amplifier, where the base current in the transistor causes the electrons to move into the collector region  creating  holes in the base region , the base therefore has less number of electrons comparing to the emitter, then the few electrons in the emitter are combined with the holes of the  base region and the remaining electrons are moved toward the collector region and constitute the collector current, the large collector current is obtained by varying the base region (4) . In fact such explanation is not useful at all in understanding the work of the transistor as an amplifier! DOI : 10.7176/APTA/78-04 Publication date :June 30 th 2019
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
关于晶体管作为放大器的另一个解释
我们找到了一个解释,为什么晶体管里的小电压变成了大电压。我们的解释是基于电子之间的排斥能量,当两个电流n和n相遇时,电子携带相同的负电荷,来自两个电路之间的共享一半,一个反向到另一个形成晶体管,这两个电路之间的共享一半被称为基极,在n-p-n或在晶体管的另一个方向上称为p-n-p。P和n只不过是一个电路中的负极和正极,如果两个电路的方向相反,那么两组带相同负电荷的电子之间的排斥相遇就无法逃脱。电子的数量与晶体管中的小电压变成大电压无关,同样只有两个带相同负电荷的电流相遇,在形成晶体管的两个共享电路中,每个电流强烈排斥另一个电流。关于晶体管作为放大器的通常解释:让我们在这里继续展示更多关于晶体管作为放大器的解释。如果我选择我在这个领域找到的最清晰的一个。晶体管由两个背靠背连接的PN二极管组成。它有三个端子,即发射极、基极和集电极。底座是由薄层组成的中间部分。二极管的右侧称为发射基极二极管,左侧称为集电极基极二极管。晶体管的发射极基结以正偏置连接,集电极基结以反偏置连接,从而提供高电阻。当发射极结处于正向偏置,集电极结处于反向偏置时,则称其处于有源区。因此晶体管有两个结点,它们可以以不同的方式偏置。集电极电流取决于发射极电流。这个由输入信号引起的发射极电流产生集电极电流,当流过负载电阻时,产生一个大的电压降。因此,一个小的输入电压导致一个大的输出电压,表明晶体管作为放大器工作(1)。事实上,这种解释对于描述晶体管作为放大器的工作是不够的,也不够有用。众所周知,通常硅是用来制造晶体管的,因为它具有高电压额定值、大电流和低温度敏感性。关于晶体管作为放大器的另一种解释:晶体管只不过是电子在两个圆之间运动,宇宙中的任何圆都由两个相等和相反的一半组成,其中一个是负n,另一个相对于另一个圆是正p,如果只有一个圆,那么一个定向电流中的电子将在圆或前面提到的二极管的两个相对的n和p之间正常运动,但当另一个圆或二极管与第一个圆或二极管在1 / 2中是正p或负n时,我们有(n- p- n)或(p- n- p)当电子进入共享两个圆p和n之间的一半,那么他们将会通过两个类似的半两个圆在同一时间,因为他们是粒子轴承相同的电荷则两电流将互相排斥,n和n、p p,这导致扩大输入电压,这种情况让我们记住最后一层在太阳的结构被称为日冕,太阳表面的氢后,电子不再依附于它们的质子,因此形成了一层自由电子和自由质子,因为电子越轻,速度越快。现在只有一层电子,因为它们都带着同样的负电荷,每个电子会排斥另一个电子,导致温度从一百万到数百万开氏度不等(2),当我们的地球通过绕其轴的日常运动面对太阳时,这些自由能量的电子撞击地球的气体包层,导致地球表面的光线(3)。类似地,两个自由电子电流在晶体管的两个共享圈中相遇,彼此强烈排斥,产生非常大的电压,而进入晶体管的电压很小。现在,没有必要使用的黑洞理论在解释工作晶体管放大器,在晶体管的基极电流导致的电子进入收集器区域创建洞底部区域,因此底部有少数量的电子比较发射器,然后几个电子发射器结合孔底部区域,其余电子移向收集器地区构成了集电极电流,通过改变基极区域(4)获得较大的集电极电流。 事实上,这样的解释对于理解晶体管作为放大器的工作是毫无用处的!DOI: 10.7176/APTA/78-04出版日期:2019年6月30日
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
THE EFFECT OF TILT ANGLE AND MASS FLOW RATE ON THE PERFORMANCE OF A PARABOLIC TROUGH SOLAR CONCENTRATOR VIA EXPERIMENTATION TIME SERIES ANALYSIS OF RADON CONCENTRATION AT DIFFERENT DEPTHS IN AN UNDERGROUND GOLDMINE A Review on Climate Change and Hydrological Models Farmers Choice and Factors Influencing Adoption of Adaptation Strategies to Climate Change in the Case of Abala Abaya Woreda, Wolaita Zone, Southern Ethiopia Estimation of Diagnostic Reference Level for Lumbar Spine X- Ray Procedures in Some Radiological Facilities in Abuja Metropolis, Nigeria
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1