Capacitive Welding of SAE 10B22 Steel with SAE 1045, DOMEX 700MC and DOCOL DP 1000 Steels

IF 0.3 4区 材料科学 Q4 METALLURGY & METALLURGICAL ENGINEERING Soldagem & Inspecao Pub Date : 2021-05-19 DOI:10.1590/0104-9224/SI26.05
R. Verástegui, João Renato Fronza Spohr, Camila Pereira Lisboa, R. Lermen
{"title":"Capacitive Welding of SAE 10B22 Steel with SAE 1045, DOMEX 700MC and DOCOL DP 1000 Steels","authors":"R. Verástegui, João Renato Fronza Spohr, Camila Pereira Lisboa, R. Lermen","doi":"10.1590/0104-9224/SI26.05","DOIUrl":null,"url":null,"abstract":"Abstract: The use of welding of dissimilar materials in the manufacture of different products, both in automobile and civil construction industry, is necessary and understanding the factors that may interfere in the quality of the final product is important for its correct development. So, the main aim of this work was to perform the capacitive welding of different steels, evaluating the effect of different energies on the microstructural evolution and hardness profiles of the welded region. Three different steels were used as base materials (SAE 1045 carbon steel, DOMEX 700MC steel, and DOCOL DP 1000 steel), which were attached to a SAE 10B22 steel pin. To weld, the steels, a bank of capacitors was used, which allows different energies. The characterization of the materials was carried out through hardness verification and metallographic characterization tests. The results show that the capacitive discharge welding process generates a heat-affected zone (HAZ) of short extension, regardless of the type of steel and the average welding energy. For the three types of steel that were used and for the different average welding energies, the microstructure formed in the HAZ was martensite.","PeriodicalId":49500,"journal":{"name":"Soldagem & Inspecao","volume":"1 1","pages":""},"PeriodicalIF":0.3000,"publicationDate":"2021-05-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Soldagem & Inspecao","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1590/0104-9224/SI26.05","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

Abstract

Abstract: The use of welding of dissimilar materials in the manufacture of different products, both in automobile and civil construction industry, is necessary and understanding the factors that may interfere in the quality of the final product is important for its correct development. So, the main aim of this work was to perform the capacitive welding of different steels, evaluating the effect of different energies on the microstructural evolution and hardness profiles of the welded region. Three different steels were used as base materials (SAE 1045 carbon steel, DOMEX 700MC steel, and DOCOL DP 1000 steel), which were attached to a SAE 10B22 steel pin. To weld, the steels, a bank of capacitors was used, which allows different energies. The characterization of the materials was carried out through hardness verification and metallographic characterization tests. The results show that the capacitive discharge welding process generates a heat-affected zone (HAZ) of short extension, regardless of the type of steel and the average welding energy. For the three types of steel that were used and for the different average welding energies, the microstructure formed in the HAZ was martensite.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
SAE 10B22钢与SAE 1045、DOMEX 700MC和DOCOL DP 1000钢的电容焊接
摘要:在汽车和民用建筑行业中,不同材料的焊接在制造不同产品中是必要的,了解可能影响最终产品质量的因素对其正确发展至关重要。因此,本工作的主要目的是进行不同钢的电容焊接,评估不同能量对焊接区显微组织演变和硬度分布的影响。使用三种不同的钢材作为基体材料(SAE 1045碳钢、DOMEX 700MC钢和DOCOL DP 1000钢),将其固定在SAE 10B22钢销上。为了焊接钢,使用了一组电容器,它允许不同的能量。通过硬度验证和金相表征试验对材料进行表征。结果表明,无论钢的类型和平均焊接能量如何,电容放电焊接过程都会产生一个短扩展的热影响区。三种钢在不同的平均焊接能量下,热影响区形成的组织均为马氏体。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Soldagem & Inspecao
Soldagem & Inspecao 工程技术-冶金工程
CiteScore
1.00
自引率
16.70%
发文量
13
审稿时长
12 weeks
期刊介绍: The Journal Soldagem & Inspeção (S&I) js a techno-scientific journal created in 1995. Printed issues of this journal are distributed free of charge to libraries in Brazil, Latin America and the Iberian Peninsula. It has been printed regularly every quarter since September, 2002, and, since the beginning of 2007, its electronic version is available in the address: (http://www.abs-soldagem.org.br/s&i/). The journal is sponsored by the Brazilian Welding Association (ABS). Since its creation several well known professionals working in welding contributed with the Journal Soldagem & Inspeção and its editorial board crosses the Brazilian borders. During its evolution the Journal received ta special contribution from the Editors-in-chief : Ronaldo Paranhos, Américo Scoti, Paulo Modenesi e Alexandre Bracarence. Since January 2012 the Editor-in-chief is Ana Sofia C. M. D’Oliveira, Full professor at Universidade Federal do Paraná (UFPR) . Her work focus mainly on Hardfacing and Physical Metallurgy. The jornal Soldagem & Inspeção also counts with 10 Associate Editors and a fix Editorial board of referees. short-term (Ad Hoc) referees can be invited to evaluate some papers submitted to the journal. The Soldagem & Inspeção journal is the scientific divulgation channel of the Brazilian Welding Association (ABS). It aims to publish original papers related to the scientific and technological development of welding, inspection, and related fields. Review papers or letters on current and controversial subjects are also published in the Journal. Its abbreviated title is Soldag. insp. (Impr.), which should be used in bibliographies, footnotes and bibliographical references and strips.
期刊最新文献
Conjuntos Soldados Submetidos a Carregamento Excêntrico Quase Estático e de Impacto Estrutural “Fora do Plano” Evaluation of the Effect of Heat Input and Cooling Rate of Rail Flash-Butt Welding using Finite Element Method Simulation Influencia de la Atmosfera de N2 en los Parámetros Operacionales y la Microestructura del Depósito en el Recargue Duro con FCAW Simulações Computacionais dos Processos de Manufatura Aditiva de Metais: Um Review Introdutório Evolução dos Processos de Automação em Células de Soldagem: Uma Revisão da Literatura
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1