Corrosion Behavior of a Novel Alumina Forming Austenitic Steel Exposed to Supercritical Water

Abstract

The corrosion behavior of novel alumina-forming austenitic steel Fe-26Ni-19Cr-2.5Al-1Nb-0.5Si and 310S steel in aerated supercritical water (SCW) at 550 °C/25 MPa was investigated. The AFA and 310S steels has been exposed in supercritical water for up to 1000h. The results show that both the weight gain curves of AFA and 310S steels follow near-parabolic law. Although the weight gain of 310S steel exposed in supercritical water after 1000h was up to 37 mg/dm2, the weight gain of AFA steel exposed in supercritical water after 1000h was near 18 mg/dm2, which was only half of that of 310S steel. The weight gain curves indicating that the AFA steel has better corrosion resistance than 310S steel. Besides, microstructure characterization of two steels has been conducted by SEM, EDS and XRD. SEM images shows that there are some differences between surface morphology of 310S steel and AFA steel. The microstructure results show that 310S steel has a double oxide layer: a Fe-riched outer layer and a Cr-riched inner layer, while a multilayer structure mainly composed of Fe-riched oxide layer, Cr-riched oxide layer and Al-riched oxide layer was formed on AFA steel, indicating a different corrosion process from 310S steel. The corrosion mechanism of two steels based on the microstructure is discussed in detail.