WATER REPELLENT BREATHABLE PET/WOOL FABRIC VIA PLASMA POLYMERISATION TECHNOLOGY

Abstract

Water-repellent textiles are usually prepared by application of hydrophobic polymers such as fluorocarbons on fabrics using padding or spraying methods followed by drying and curing steps. These procedures impart hydrophobicity to the fabric, but harm the physical and handle properties of the fabric. In this study, low-pressure plasma was employed for the polymerization of 1H,1H,2H,2H-Perfluorooctyl acrylate on PET/Wool fabric for obtaining water-repellent properties with minimum effect on other desirable properties. To compare the results with the conventional industrial processes, a sample was treated with a commercial water-repellent agent using pad-dry-cure method. The water contact angle, bending length, tensile strength, air permeability, and surface morphology of the samples were compared. The plasma-treated sample showed similar water contact angle and higher fastness properties compared with the sample prepared by the conventional method. The tensile strength of the samples was similar, while the air permeability of the plasmatreated sample was higher and the coating was more uniform compared with the sample prepared by the paddry- cure method.