Wireless communication with batching method based on Xbee-PRO S2B module for sensing of wind speed

Measurements of wind energy from rural areas play an important role in mapping the wind energy potential. It takes a reliable communication from sensor to server. Technique of wireless data transmission from the sensors are placed in rural areas to the server, often in trouble caused by the weather and the system so that it makes the data collected in the server becomes inaccurate, on the further condition, it is causes the lack of proper decision. This study focused on the implementation of the equation for the batching process as a fundamental coding program in the process of capture and transmission data captured from the sensors to the host node node. Communication performance testing occured on node to node (N2N) wireless communications. Data measurement variable are the wind speed, temperature and humidity. The distance between the sensor node and the server node at 100 meters. From this research, that the data generated are measured in one day from the sensor node was successfully changed in the form of 3 packages stored in the memory card is then sent to the host node. Results capture of sensor nodes during the day, which is placed in the environment of the University Siliwangi Tasikmalaya in West Java of Indonesia, to show that the highest wind speed is 5 (m/s) is at noon is 13:00 to 15:00, while the lowest rate is in the morning is 4:00 until 6:00.