{"title":"电弧炉炉渣陶瓷体的烧结行为","authors":"Tai-lin Yang, Y. Zong, Shaohua Li, D. Cang","doi":"10.1109/WARTIA.2014.6976193","DOIUrl":null,"url":null,"abstract":"The effect of the sintering system on the properties of sintered ceramics bodies from electric arc furnace slag (EAFS) was investigated. The sintering behavior was evaluated by means of the flexural strength and water absorption, while the microstructures of samples were investigated by scanning electron microscopy (SEM). The results indicate that the major impacts on performance of ceramics during the heating stage are heating rate and holding time. When holding time is constant, the samples heating rate of 4°C / min perform poor than 10°C / min. Keeping holding time of 40 minutes, the ceramics bodies properties and structure stabilized. The optimum sintering system should keep heating rate at nearby 10°C / min when sintering temperature is 1170°C, and the holding time should be 40 minutes.","PeriodicalId":288854,"journal":{"name":"2014 IEEE Workshop on Advanced Research and Technology in Industry Applications (WARTIA)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2014-12-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Sintering behavior of ceramic bodies from electric arc furnace slag\",\"authors\":\"Tai-lin Yang, Y. Zong, Shaohua Li, D. Cang\",\"doi\":\"10.1109/WARTIA.2014.6976193\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The effect of the sintering system on the properties of sintered ceramics bodies from electric arc furnace slag (EAFS) was investigated. The sintering behavior was evaluated by means of the flexural strength and water absorption, while the microstructures of samples were investigated by scanning electron microscopy (SEM). The results indicate that the major impacts on performance of ceramics during the heating stage are heating rate and holding time. When holding time is constant, the samples heating rate of 4°C / min perform poor than 10°C / min. Keeping holding time of 40 minutes, the ceramics bodies properties and structure stabilized. The optimum sintering system should keep heating rate at nearby 10°C / min when sintering temperature is 1170°C, and the holding time should be 40 minutes.\",\"PeriodicalId\":288854,\"journal\":{\"name\":\"2014 IEEE Workshop on Advanced Research and Technology in Industry Applications (WARTIA)\",\"volume\":\"1 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2014-12-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2014 IEEE Workshop on Advanced Research and Technology in Industry Applications (WARTIA)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/WARTIA.2014.6976193\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2014 IEEE Workshop on Advanced Research and Technology in Industry Applications (WARTIA)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/WARTIA.2014.6976193","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Sintering behavior of ceramic bodies from electric arc furnace slag
The effect of the sintering system on the properties of sintered ceramics bodies from electric arc furnace slag (EAFS) was investigated. The sintering behavior was evaluated by means of the flexural strength and water absorption, while the microstructures of samples were investigated by scanning electron microscopy (SEM). The results indicate that the major impacts on performance of ceramics during the heating stage are heating rate and holding time. When holding time is constant, the samples heating rate of 4°C / min perform poor than 10°C / min. Keeping holding time of 40 minutes, the ceramics bodies properties and structure stabilized. The optimum sintering system should keep heating rate at nearby 10°C / min when sintering temperature is 1170°C, and the holding time should be 40 minutes.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
