{"title":"插电式混合动力汽车全桥DC-DC变换器和带谐振电路的升压DC-DC变换器","authors":"Lalmalsawmi, P. Biswas","doi":"10.1109/ICICCSP53532.2022.9862426","DOIUrl":null,"url":null,"abstract":"In this paper, the analysis and simulations of a Full-Bridge DC-DC Converter and a Boost DC-DC Converter with Resonant Circuit for Plug-in Hybrid Electric Vehicles (PHEVs) are presented. Simulations are carried out using MATLAB-SIMULINK software and the results show that both the converters are able to boost the input voltage of 220V to an output voltage of 440V, and 480V respectively, which is required to control the motor. The outputs of these converters are then applied to a 3-phase 180° mode voltage source inverter (VSI) fed permanent magnet synchronous motor (PMSM). The converters, which are connected to a 3-phase 180° mode VSI fed PMSM, are also simulated and presented in this paper. The input ripples of the converters are reduced by connecting the inductor in series with the input DC source. The output voltage ripples are also removed/reduced by connecting a capacitor-based filter at the output side of the converter. MATLAB 2018b is used for the simulation.","PeriodicalId":326163,"journal":{"name":"2022 International Conference on Intelligent Controller and Computing for Smart Power (ICICCSP)","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2022-07-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Full-Bridge DC-DC Converter and Boost DC-DC Converter with Resonant Circuit For Plug-in Hybrid Electric Vehicles\",\"authors\":\"Lalmalsawmi, P. Biswas\",\"doi\":\"10.1109/ICICCSP53532.2022.9862426\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, the analysis and simulations of a Full-Bridge DC-DC Converter and a Boost DC-DC Converter with Resonant Circuit for Plug-in Hybrid Electric Vehicles (PHEVs) are presented. Simulations are carried out using MATLAB-SIMULINK software and the results show that both the converters are able to boost the input voltage of 220V to an output voltage of 440V, and 480V respectively, which is required to control the motor. The outputs of these converters are then applied to a 3-phase 180° mode voltage source inverter (VSI) fed permanent magnet synchronous motor (PMSM). The converters, which are connected to a 3-phase 180° mode VSI fed PMSM, are also simulated and presented in this paper. The input ripples of the converters are reduced by connecting the inductor in series with the input DC source. The output voltage ripples are also removed/reduced by connecting a capacitor-based filter at the output side of the converter. MATLAB 2018b is used for the simulation.\",\"PeriodicalId\":326163,\"journal\":{\"name\":\"2022 International Conference on Intelligent Controller and Computing for Smart Power (ICICCSP)\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-07-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2022 International Conference on Intelligent Controller and Computing for Smart Power (ICICCSP)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICICCSP53532.2022.9862426\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2022 International Conference on Intelligent Controller and Computing for Smart Power (ICICCSP)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICICCSP53532.2022.9862426","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Full-Bridge DC-DC Converter and Boost DC-DC Converter with Resonant Circuit For Plug-in Hybrid Electric Vehicles
In this paper, the analysis and simulations of a Full-Bridge DC-DC Converter and a Boost DC-DC Converter with Resonant Circuit for Plug-in Hybrid Electric Vehicles (PHEVs) are presented. Simulations are carried out using MATLAB-SIMULINK software and the results show that both the converters are able to boost the input voltage of 220V to an output voltage of 440V, and 480V respectively, which is required to control the motor. The outputs of these converters are then applied to a 3-phase 180° mode voltage source inverter (VSI) fed permanent magnet synchronous motor (PMSM). The converters, which are connected to a 3-phase 180° mode VSI fed PMSM, are also simulated and presented in this paper. The input ripples of the converters are reduced by connecting the inductor in series with the input DC source. The output voltage ripples are also removed/reduced by connecting a capacitor-based filter at the output side of the converter. MATLAB 2018b is used for the simulation.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
