涡轮增压火花点火发动机燃料浓缩降低的分排气期评估

IF 1.1 Q3 TRANSPORTATION SCIENCE & TECHNOLOGY SAE International Journal of Engines Pub Date : 2023-10-26 DOI:10.4271/03-17-03-0022
Praveen Kumar, Xin Yu, Anqi Zhang, Andrew Baur, Nayan Engineer, David Roth
{"title":"涡轮增压火花点火发动机燃料浓缩降低的分排气期评估","authors":"Praveen Kumar, Xin Yu, Anqi Zhang, Andrew Baur, Nayan Engineer, David Roth","doi":"10.4271/03-17-03-0022","DOIUrl":null,"url":null,"abstract":"<div>Turbocharged spark-ignition (SI) engines, owing to frequent engine knocking events, utilize retarded spark timing that causes combustion inefficiency, and high turbine inlet temperature (Trb-In T) levels. Fuel enrichment is implemented at high power levels to prevent excessive Trb-In T levels, resulting in an additional fueling penalty and higher CO emissions. In current times, fuel-enrichment reductions are of high strategic importance for engine manufacturers to meet the imminent emissions regulations. To that end, the authors investigated the divided exhaust period (DEP) concept in a 2.2 L turbocharged SI engine with a geometric compression ratio of 14 by decoupling blowdown (BD) and scavenge (SC) events during the exhaust process. Using a validated 1D engine model, the authors first analyzed the DEP concept in terms of pumping mean effective pressure (PMEP) and engine knocking (KI) reduction. Subsequently, the authors examined the effectiveness of the DEP concept using a “low-restriction exhaust flowpath” and varying late intake valve closing (LIVC) duration.</div> <div>First, using DEP, significant PMEP and KI reductions benefits were observed at high power engine conditions along with a large increase in Trb-In T from the early blowdown event. Subsequently, use of a low restriction exhaust flowpath and a shortened LIVC duration further elevated the DEP benefits, including Trb-In T reduction that facilitated enrichment reduction. At 4,000 RPM/20 bar BMEP, ~70% lower PMEP and a 2.2 point increase in ITEg were noted relative to the base engine. However, the 2,000 RPM peak torque engine condition was compromised using DEP, due to knock limitation and deteriorated stock turbocharger performance. Finally, DEP design integrated with an off-the-shelf (new) turbocharger system remedied the low-end torque challenges and demonstrated a notable enrichment reduction and thermal efficiency benefits at the full load engine curve including the 200 kW rated condition.</div>","PeriodicalId":47948,"journal":{"name":"SAE International Journal of Engines","volume":null,"pages":null},"PeriodicalIF":1.1000,"publicationDate":"2023-10-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Divided Exhaust Period Assessment for Fuel-Enrichment Reduction in Turbocharged Spark-Ignition Engines\",\"authors\":\"Praveen Kumar, Xin Yu, Anqi Zhang, Andrew Baur, Nayan Engineer, David Roth\",\"doi\":\"10.4271/03-17-03-0022\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div>Turbocharged spark-ignition (SI) engines, owing to frequent engine knocking events, utilize retarded spark timing that causes combustion inefficiency, and high turbine inlet temperature (Trb-In T) levels. Fuel enrichment is implemented at high power levels to prevent excessive Trb-In T levels, resulting in an additional fueling penalty and higher CO emissions. In current times, fuel-enrichment reductions are of high strategic importance for engine manufacturers to meet the imminent emissions regulations. To that end, the authors investigated the divided exhaust period (DEP) concept in a 2.2 L turbocharged SI engine with a geometric compression ratio of 14 by decoupling blowdown (BD) and scavenge (SC) events during the exhaust process. Using a validated 1D engine model, the authors first analyzed the DEP concept in terms of pumping mean effective pressure (PMEP) and engine knocking (KI) reduction. Subsequently, the authors examined the effectiveness of the DEP concept using a “low-restriction exhaust flowpath” and varying late intake valve closing (LIVC) duration.</div> <div>First, using DEP, significant PMEP and KI reductions benefits were observed at high power engine conditions along with a large increase in Trb-In T from the early blowdown event. Subsequently, use of a low restriction exhaust flowpath and a shortened LIVC duration further elevated the DEP benefits, including Trb-In T reduction that facilitated enrichment reduction. At 4,000 RPM/20 bar BMEP, ~70% lower PMEP and a 2.2 point increase in ITEg were noted relative to the base engine. However, the 2,000 RPM peak torque engine condition was compromised using DEP, due to knock limitation and deteriorated stock turbocharger performance. Finally, DEP design integrated with an off-the-shelf (new) turbocharger system remedied the low-end torque challenges and demonstrated a notable enrichment reduction and thermal efficiency benefits at the full load engine curve including the 200 kW rated condition.</div>\",\"PeriodicalId\":47948,\"journal\":{\"name\":\"SAE International Journal of Engines\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2023-10-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"SAE International Journal of Engines\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.4271/03-17-03-0022\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"TRANSPORTATION SCIENCE & TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"SAE International Journal of Engines","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.4271/03-17-03-0022","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"TRANSPORTATION SCIENCE & TECHNOLOGY","Score":null,"Total":0}
引用次数: 0

摘要

涡轮增压火花点火(SI)发动机,由于频繁的发动机爆震事件,利用延迟的火花定时,导致燃烧效率低下,高涡轮入口温度(Trb-In - T)水平。在高功率水平下进行燃料浓缩,以防止Trb-In - T水平过高,从而导致额外的加油罚款和更高的CO排放。当前,降低燃料浓缩对发动机制造商满足即将出台的排放法规具有重要的战略意义。为此,作者通过分离排气过程中的排污(BD)和扫气(SC)事件,研究了几何压缩比为14的2.2 L涡轮增压SI发动机的分排气期(DEP)概念。使用经过验证的1D发动机模型,作者首先从泵送平均有效压力(PMEP)和发动机爆震(KI)减少的角度分析了DEP概念。随后,作者使用“低限制排气流道”和不同的晚期进气阀关闭(LIVC)持续时间来检验DEP概念的有效性。首先,使用DEP,在大功率发动机条件下观察到显著的PMEP和KI降低效果,同时从早期排污事件中大幅增加Trb-In T。随后,使用低限制排气路径和缩短LIVC持续时间进一步提高了DEP效益,包括Trb-In T的减少,促进了富集的减少。在4000rpm / 20bar BMEP时,与基础发动机相比,PMEP降低了约70%,ITEg增加了2.2个点。然而,由于爆震限制和原涡轮增压器性能恶化,DEP降低了2,000 RPM峰值扭矩的发动机条件。最后,DEP设计集成了一个现成的(新型)涡轮增压器系统,解决了低端扭矩挑战,并在满载发动机曲线(包括200 kW额定工况)下显示出显著的富化降低和热效率优势。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Divided Exhaust Period Assessment for Fuel-Enrichment Reduction in Turbocharged Spark-Ignition Engines
Turbocharged spark-ignition (SI) engines, owing to frequent engine knocking events, utilize retarded spark timing that causes combustion inefficiency, and high turbine inlet temperature (Trb-In T) levels. Fuel enrichment is implemented at high power levels to prevent excessive Trb-In T levels, resulting in an additional fueling penalty and higher CO emissions. In current times, fuel-enrichment reductions are of high strategic importance for engine manufacturers to meet the imminent emissions regulations. To that end, the authors investigated the divided exhaust period (DEP) concept in a 2.2 L turbocharged SI engine with a geometric compression ratio of 14 by decoupling blowdown (BD) and scavenge (SC) events during the exhaust process. Using a validated 1D engine model, the authors first analyzed the DEP concept in terms of pumping mean effective pressure (PMEP) and engine knocking (KI) reduction. Subsequently, the authors examined the effectiveness of the DEP concept using a “low-restriction exhaust flowpath” and varying late intake valve closing (LIVC) duration.
First, using DEP, significant PMEP and KI reductions benefits were observed at high power engine conditions along with a large increase in Trb-In T from the early blowdown event. Subsequently, use of a low restriction exhaust flowpath and a shortened LIVC duration further elevated the DEP benefits, including Trb-In T reduction that facilitated enrichment reduction. At 4,000 RPM/20 bar BMEP, ~70% lower PMEP and a 2.2 point increase in ITEg were noted relative to the base engine. However, the 2,000 RPM peak torque engine condition was compromised using DEP, due to knock limitation and deteriorated stock turbocharger performance. Finally, DEP design integrated with an off-the-shelf (new) turbocharger system remedied the low-end torque challenges and demonstrated a notable enrichment reduction and thermal efficiency benefits at the full load engine curve including the 200 kW rated condition.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
SAE International Journal of Engines
SAE International Journal of Engines TRANSPORTATION SCIENCE & TECHNOLOGY-
CiteScore
2.70
自引率
8.30%
发文量
38
期刊最新文献
Combustion Mode Evaluation of a Methanol–Diesel Dual Direct Injection Engine with a Control of Injection Timing and Energy Substitution Ratio An Investigation on Exhaust Pulse Characteristics of Asymmetric Twin-Scroll Turbocharged Heavy-Duty Diesel Engine Optimizing Spark-Ignition Engine Performance with Ternary Blend Fuels and Hybrid Nanolubricants: A Response Surface Methodology Study Simulation Studies of Pollutant Emission from Passenger Cars Cavitation Phenomenon and Spray Atomization in Different Types of Diesel Engine Nozzles: A Systematic Review
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1