碳纳米管在碳纤维表面电泳沉积对热塑性聚酰亚胺复合材料界面性能的影响

IF 1.6 4区 化学 Q4 CHEMISTRY, PHYSICAL Surface and Interface Analysis Pub Date : 2023-11-11 DOI:10.1002/sia.7272
Li Jian
{"title":"碳纳米管在碳纤维表面电泳沉积对热塑性聚酰亚胺复合材料界面性能的影响","authors":"Li Jian","doi":"10.1002/sia.7272","DOIUrl":null,"url":null,"abstract":"In order to improve the interfacial properties of carbon fiber/polyimide (CF/PI) composite, silanization reaction carbon nanotubes (CNTs) were introduced to the surface of carbon fiber by electrophoretic deposition to prepare CF/CNT/PI composite. The effects of carbon fiber surface treatment on the mechanical properties of the composites were studied. The results showed that the interlaminar shear strength and bending strength of the composite materials were increased by 11% and 9%, respectively. The scanning electron microscope and Atomic Force Microscope (AFM) was used to analyze the fine structure of composite interface phase. The results show that the introduction of CNTs creates an interface transition layer of CNTs reinforced PI resin between the fiber and the matrix.","PeriodicalId":22062,"journal":{"name":"Surface and Interface Analysis","volume":null,"pages":null},"PeriodicalIF":1.6000,"publicationDate":"2023-11-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"The effect of electrophoretic deposition of carbon nanotubes on carbon fiber on interfacial properties of the thermoplastic polyimide composite\",\"authors\":\"Li Jian\",\"doi\":\"10.1002/sia.7272\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In order to improve the interfacial properties of carbon fiber/polyimide (CF/PI) composite, silanization reaction carbon nanotubes (CNTs) were introduced to the surface of carbon fiber by electrophoretic deposition to prepare CF/CNT/PI composite. The effects of carbon fiber surface treatment on the mechanical properties of the composites were studied. The results showed that the interlaminar shear strength and bending strength of the composite materials were increased by 11% and 9%, respectively. The scanning electron microscope and Atomic Force Microscope (AFM) was used to analyze the fine structure of composite interface phase. The results show that the introduction of CNTs creates an interface transition layer of CNTs reinforced PI resin between the fiber and the matrix.\",\"PeriodicalId\":22062,\"journal\":{\"name\":\"Surface and Interface Analysis\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.6000,\"publicationDate\":\"2023-11-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Surface and Interface Analysis\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1002/sia.7272\",\"RegionNum\":4,\"RegionCategory\":\"化学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Surface and Interface Analysis","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1002/sia.7272","RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
引用次数: 0

摘要

为了提高碳纤维/聚酰亚胺(CF/PI)复合材料的界面性能,采用电泳沉积的方法在碳纤维表面引入硅烷化反应碳纳米管(CNTs)制备CF/CNT/PI复合材料。研究了碳纤维表面处理对复合材料力学性能的影响。结果表明,复合材料的层间剪切强度和弯曲强度分别提高了11%和9%。采用扫描电镜和原子力显微镜(AFM)对复合材料界面相的精细结构进行分析。结果表明,CNTs的引入在纤维和基体之间形成了CNTs增强PI树脂的界面过渡层。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
The effect of electrophoretic deposition of carbon nanotubes on carbon fiber on interfacial properties of the thermoplastic polyimide composite
In order to improve the interfacial properties of carbon fiber/polyimide (CF/PI) composite, silanization reaction carbon nanotubes (CNTs) were introduced to the surface of carbon fiber by electrophoretic deposition to prepare CF/CNT/PI composite. The effects of carbon fiber surface treatment on the mechanical properties of the composites were studied. The results showed that the interlaminar shear strength and bending strength of the composite materials were increased by 11% and 9%, respectively. The scanning electron microscope and Atomic Force Microscope (AFM) was used to analyze the fine structure of composite interface phase. The results show that the introduction of CNTs creates an interface transition layer of CNTs reinforced PI resin between the fiber and the matrix.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Surface and Interface Analysis
Surface and Interface Analysis 化学-物理化学
CiteScore
3.30
自引率
5.90%
发文量
130
审稿时长
4.4 months
期刊介绍: Surface and Interface Analysis is devoted to the publication of papers dealing with the development and application of techniques for the characterization of surfaces, interfaces and thin films. Papers dealing with standardization and quantification are particularly welcome, and also those which deal with the application of these techniques to industrial problems. Papers dealing with the purely theoretical aspects of the technique will also be considered. Review articles will be published; prior consultation with one of the Editors is advised in these cases. Papers must clearly be of scientific value in the field and will be submitted to two independent referees. Contributions must be in English and must not have been published elsewhere, and authors must agree not to communicate the same material for publication to any other journal. Authors are invited to submit their papers for publication to John Watts (UK only), Jose Sanz (Rest of Europe), John T. Grant (all non-European countries, except Japan) or R. Shimizu (Japan only).
期刊最新文献
Effect of Surface Dissolution on the Floatability of Brucite in Three Anionic Collector Systems Preparation and Properties of Mo/Ti/Sn Conductivity Conversion Coatings on 6063 Aluminum Alloy Nanosilicon Stabilized With Ligands: Effect of High‐Energy Proton Beam on Luminescent Properties Structural Analysis and Electrical Property of Acid‐Treated MWCNT Combined Experimental and Periodic DFT Study of the Size Dependence of Adsorption Properties of Oxide‐Supported Metal Nanoclusters: A Case of NO on Ni/Al2O3
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1