{"title":"非常规油藏数值模拟中流量参数的设置方法及其对生产的影响","authors":"Bince Li, Fengpeng Lai, Guanglei Ren, Huachao Sun","doi":"10.1093/jge/gxad068","DOIUrl":null,"url":null,"abstract":"Abstract Tight reservoirs have poor physical properties and complex pore structures, and well production is often affected by the starting threshold gradient, stress sensitivity, and water blockage. In this paper, the numerical simulation method is used to make these three factors equal. In addition, normalized influence coefficient analysis and grey relation analysis are used to investigate the degree of influence of each factor on well production. In this study, three methods are developed to set the threshold pressure gradient according to the permeability zoning, and the effect of reservoir heterogeneity is considered to set the threshold pressure gradient for unconventional reservoirs. The equivalent accuracy of the numerical simulation of the threshold pressure gradient can be improved compared to the traditional method. Stress sensitivity and water blockage effects are equated by correcting for rock compressibility coefficient and gas relative permeability. The fit rate of the gas well production history is improved by 2–3% after considering complex factors. The inclusion of the complex factors reduces the reservoir energy mobilization. The threshold pressure gradient results in an additional pressure reduction of about 1.8 MPa around the gas well. Residual gas identification and development is helped by clarifying the effect of complex factors on formation pressure When only the effect of a single factor is considered, water blockage has the most significant effect on gas well production, followed by threshold pressure and the weakest stress sensitivity. When several factors are considered together, the effect of stress sensitivity is increased.","PeriodicalId":54820,"journal":{"name":"Journal of Geophysics and Engineering","volume":"32 1","pages":"0"},"PeriodicalIF":1.6000,"publicationDate":"2023-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Flow parameter setting methods in numerical simulation of the unconventional reservoir and its impact on production\",\"authors\":\"Bince Li, Fengpeng Lai, Guanglei Ren, Huachao Sun\",\"doi\":\"10.1093/jge/gxad068\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract Tight reservoirs have poor physical properties and complex pore structures, and well production is often affected by the starting threshold gradient, stress sensitivity, and water blockage. In this paper, the numerical simulation method is used to make these three factors equal. In addition, normalized influence coefficient analysis and grey relation analysis are used to investigate the degree of influence of each factor on well production. In this study, three methods are developed to set the threshold pressure gradient according to the permeability zoning, and the effect of reservoir heterogeneity is considered to set the threshold pressure gradient for unconventional reservoirs. The equivalent accuracy of the numerical simulation of the threshold pressure gradient can be improved compared to the traditional method. Stress sensitivity and water blockage effects are equated by correcting for rock compressibility coefficient and gas relative permeability. The fit rate of the gas well production history is improved by 2–3% after considering complex factors. The inclusion of the complex factors reduces the reservoir energy mobilization. The threshold pressure gradient results in an additional pressure reduction of about 1.8 MPa around the gas well. Residual gas identification and development is helped by clarifying the effect of complex factors on formation pressure When only the effect of a single factor is considered, water blockage has the most significant effect on gas well production, followed by threshold pressure and the weakest stress sensitivity. When several factors are considered together, the effect of stress sensitivity is increased.\",\"PeriodicalId\":54820,\"journal\":{\"name\":\"Journal of Geophysics and Engineering\",\"volume\":\"32 1\",\"pages\":\"0\"},\"PeriodicalIF\":1.6000,\"publicationDate\":\"2023-09-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Geophysics and Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1093/jge/gxad068\",\"RegionNum\":3,\"RegionCategory\":\"地球科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"GEOCHEMISTRY & GEOPHYSICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Geophysics and Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1093/jge/gxad068","RegionNum":3,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"GEOCHEMISTRY & GEOPHYSICS","Score":null,"Total":0}
Flow parameter setting methods in numerical simulation of the unconventional reservoir and its impact on production
Abstract Tight reservoirs have poor physical properties and complex pore structures, and well production is often affected by the starting threshold gradient, stress sensitivity, and water blockage. In this paper, the numerical simulation method is used to make these three factors equal. In addition, normalized influence coefficient analysis and grey relation analysis are used to investigate the degree of influence of each factor on well production. In this study, three methods are developed to set the threshold pressure gradient according to the permeability zoning, and the effect of reservoir heterogeneity is considered to set the threshold pressure gradient for unconventional reservoirs. The equivalent accuracy of the numerical simulation of the threshold pressure gradient can be improved compared to the traditional method. Stress sensitivity and water blockage effects are equated by correcting for rock compressibility coefficient and gas relative permeability. The fit rate of the gas well production history is improved by 2–3% after considering complex factors. The inclusion of the complex factors reduces the reservoir energy mobilization. The threshold pressure gradient results in an additional pressure reduction of about 1.8 MPa around the gas well. Residual gas identification and development is helped by clarifying the effect of complex factors on formation pressure When only the effect of a single factor is considered, water blockage has the most significant effect on gas well production, followed by threshold pressure and the weakest stress sensitivity. When several factors are considered together, the effect of stress sensitivity is increased.
期刊介绍:
Journal of Geophysics and Engineering aims to promote research and developments in geophysics and related areas of engineering. It has a predominantly applied science and engineering focus, but solicits and accepts high-quality contributions in all earth-physics disciplines, including geodynamics, natural and controlled-source seismology, oil, gas and mineral exploration, petrophysics and reservoir geophysics. The journal covers those aspects of engineering that are closely related to geophysics, or on the targets and problems that geophysics addresses. Typically, this is engineering focused on the subsurface, particularly petroleum engineering, rock mechanics, geophysical software engineering, drilling technology, remote sensing, instrumentation and sensor design.