(Digital Presentation) Ethanol Electro-Oxidation Kinetics Using Activated Carbon-Supported Pt-Ag Catalysts in Alkaline Media

Due to scarcity of fossil fuels and their severe environmental consequences, the development of high efficiency energy conversion devices such as fuel cells (FCs) have gained considerable attention. The specific energy conversion efficiency of FC is highly influenced by the activity of the electrocatalysts. The Pt is widely used as an electrocatalyst due to its high activity and stability, but its high cost and depletion of resources hinder its commercialization. One of the workable strategies for the practical application of Pt is to reduce its content by alloying with some non-precious metals and simultaneously maintain its electrochemical performance. In this context, we developed a low Pt-loaded Pt-Ag/C alloy electrocatalyst via a gradual reduction process. The electrochemical performance of the as-synthesized catalyst was investigated by cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS) using the three-electrode electrochemical workstation at room temperature. The electrocatalytic investigations reveal that the resultant alloy has an activity of 32.7 mA cm -2 , which is significantly higher than that of Pt/C (17.6 mA cm -2 ) in an alkaline electrolyte and makes it a very efficient electrocatalyst for the ethanol oxidation reaction (EOR). The partial electron transfer from Ag to Pt in Pt-Ag alloy, which weakens the CO binding and poisoning effect on the surface, may be partly responsible for the enhanced catalytic activity of Pt-Ag/C. The activated carbon support also favors charge transport by transferring charge from catalytic active sites to external circuits. The stability and durability studies reveal that Pt-Ag/C performs significantly better than Pt/C, making it a viable electrocatalyst for EOR. Keywords: Direct Ethanol Fuel Cell, Electrochemical Impedance Spectroscopy, Cyclic Voltammetry, Alloy.