Mohamed E. Haseeb, Rabab M. Nasser, Amal M. Nassar, Nehal S. Ahmed
{"title":"柠檬酸酯作为潜在的合成润滑剂:合成、流变性能和热稳定性的研究","authors":"Mohamed E. Haseeb, Rabab M. Nasser, Amal M. Nassar, Nehal S. Ahmed","doi":"10.1080/10402004.2023.2269242","DOIUrl":null,"url":null,"abstract":"AbstractThe failure of mineral oils to work in machinery and engines under intense pressure, heat, and corrosion has prompted researchers to consider the development of synthetic lubricating oils that are appropriate for these demanding conditions. This research was conducted to synthesize new esters by reaction of citric acids (CA) with mono-alcohols (hexanol, octanol, decanol and 2-ethylhexanol), then the products were reacted with propanoic acid, valeric acid, and octanoic acid separately using 1:1 molar ratio. The resulting esters were characterized using nuclear magnetic resonance spectroscopy (NMR), Fourier-transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA). The rheological properties were studied, and it was found that the prepared esters have high thermal stabilities as the degradation takes place in the range of 175ºC - 425ºC. The prepared esters show Newtonian behaviors as their viscosities do not change by changing shear rate. The physicochemical characteristic of prepared esters were also determined which showed improved low temperature properties (PP) -36ºC for ester (2R)-1,2-bis(2-ethylhexyl) 3-nonyl 2-(pentanoyloxy)propane-1,2,3-tricarboxylate (COEV) and viscosity index (VI) at 195 for ester (2R)-1-decyl 3-(2-ethylhexyl) 2-heptan-3-yl 2-(propionyloxy)propane-1,2,3-tricarboxylate (CDEP). The stabilities of the prepared esters were confirmed via the computational analysis and their stabilities were ranked as CDEP > COEP > COEO > COEV.Keywords: synthetic lubricantscitrate estersrheologyviscosity indexpour pointDisclaimerAs a service to authors and researchers we are providing this version of an accepted manuscript (AM). Copyediting, typesetting, and review of the resulting proofs will be undertaken on this manuscript before final publication of the Version of Record (VoR). During production and pre-press, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal relate to these versions also.","PeriodicalId":23315,"journal":{"name":"Tribology Transactions","volume":"53 1","pages":"0"},"PeriodicalIF":2.0000,"publicationDate":"2023-10-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Citric Acid-Based Esters as Potential Synthetic Lubricants: A Study of Their Synthesis, Rheological Properties and Thermal Stability\",\"authors\":\"Mohamed E. Haseeb, Rabab M. Nasser, Amal M. Nassar, Nehal S. Ahmed\",\"doi\":\"10.1080/10402004.2023.2269242\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"AbstractThe failure of mineral oils to work in machinery and engines under intense pressure, heat, and corrosion has prompted researchers to consider the development of synthetic lubricating oils that are appropriate for these demanding conditions. This research was conducted to synthesize new esters by reaction of citric acids (CA) with mono-alcohols (hexanol, octanol, decanol and 2-ethylhexanol), then the products were reacted with propanoic acid, valeric acid, and octanoic acid separately using 1:1 molar ratio. The resulting esters were characterized using nuclear magnetic resonance spectroscopy (NMR), Fourier-transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA). The rheological properties were studied, and it was found that the prepared esters have high thermal stabilities as the degradation takes place in the range of 175ºC - 425ºC. The prepared esters show Newtonian behaviors as their viscosities do not change by changing shear rate. The physicochemical characteristic of prepared esters were also determined which showed improved low temperature properties (PP) -36ºC for ester (2R)-1,2-bis(2-ethylhexyl) 3-nonyl 2-(pentanoyloxy)propane-1,2,3-tricarboxylate (COEV) and viscosity index (VI) at 195 for ester (2R)-1-decyl 3-(2-ethylhexyl) 2-heptan-3-yl 2-(propionyloxy)propane-1,2,3-tricarboxylate (CDEP). The stabilities of the prepared esters were confirmed via the computational analysis and their stabilities were ranked as CDEP > COEP > COEO > COEV.Keywords: synthetic lubricantscitrate estersrheologyviscosity indexpour pointDisclaimerAs a service to authors and researchers we are providing this version of an accepted manuscript (AM). Copyediting, typesetting, and review of the resulting proofs will be undertaken on this manuscript before final publication of the Version of Record (VoR). During production and pre-press, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal relate to these versions also.\",\"PeriodicalId\":23315,\"journal\":{\"name\":\"Tribology Transactions\",\"volume\":\"53 1\",\"pages\":\"0\"},\"PeriodicalIF\":2.0000,\"publicationDate\":\"2023-10-17\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Tribology Transactions\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1080/10402004.2023.2269242\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Tribology Transactions","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1080/10402004.2023.2269242","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Citric Acid-Based Esters as Potential Synthetic Lubricants: A Study of Their Synthesis, Rheological Properties and Thermal Stability
AbstractThe failure of mineral oils to work in machinery and engines under intense pressure, heat, and corrosion has prompted researchers to consider the development of synthetic lubricating oils that are appropriate for these demanding conditions. This research was conducted to synthesize new esters by reaction of citric acids (CA) with mono-alcohols (hexanol, octanol, decanol and 2-ethylhexanol), then the products were reacted with propanoic acid, valeric acid, and octanoic acid separately using 1:1 molar ratio. The resulting esters were characterized using nuclear magnetic resonance spectroscopy (NMR), Fourier-transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA). The rheological properties were studied, and it was found that the prepared esters have high thermal stabilities as the degradation takes place in the range of 175ºC - 425ºC. The prepared esters show Newtonian behaviors as their viscosities do not change by changing shear rate. The physicochemical characteristic of prepared esters were also determined which showed improved low temperature properties (PP) -36ºC for ester (2R)-1,2-bis(2-ethylhexyl) 3-nonyl 2-(pentanoyloxy)propane-1,2,3-tricarboxylate (COEV) and viscosity index (VI) at 195 for ester (2R)-1-decyl 3-(2-ethylhexyl) 2-heptan-3-yl 2-(propionyloxy)propane-1,2,3-tricarboxylate (CDEP). The stabilities of the prepared esters were confirmed via the computational analysis and their stabilities were ranked as CDEP > COEP > COEO > COEV.Keywords: synthetic lubricantscitrate estersrheologyviscosity indexpour pointDisclaimerAs a service to authors and researchers we are providing this version of an accepted manuscript (AM). Copyediting, typesetting, and review of the resulting proofs will be undertaken on this manuscript before final publication of the Version of Record (VoR). During production and pre-press, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal relate to these versions also.
期刊介绍:
Tribology Transactions contains experimental and theoretical papers on friction, wear, lubricants, lubrication, materials, machines and moving components, from the macro- to the nano-scale.
The papers will be of interest to academic, industrial and government researchers and technologists working in many fields, including:
Aerospace, Agriculture & Forest, Appliances, Automotive, Bearings, Biomedical Devices, Condition Monitoring, Engines, Gears, Industrial Engineering, Lubricants, Lubricant Additives, Magnetic Data Storage, Manufacturing, Marine, Materials, MEMs and NEMs, Mining, Power Generation, Metalworking Fluids, Seals, Surface Engineering and Testing and Analysis.
All submitted manuscripts are subject to initial appraisal by the Editor-in-Chief and, if found suitable for further consideration, are submitted for peer review by independent, anonymous expert referees. All peer review in single blind and submission is online via ScholarOne Manuscripts.