Numerical investigation on the effect of slit thickness and outlet angle of the bladeless fan for flow optimization using CFD techniques

The effect of outlet thickness and outlet angle of the bladeless fan have been an alysed numerically on the aerodynamic performance of the bladeless fan. Five different aerofoil profiles have been considered for the present work is Eppler 479, Eppler169, Eppler 473, S1046 and S1048. The bladeless fan arrangement has been achieved by converting the aerodynamic models listed above. The ANSYS ICEM CFD 16.0 have been used to discretize the enclosure and bladeless fan through finite volume approach. The mesh model is then imported into ANSYS CFX 16.0 pre-processor for applying the required boundary conditions. The governing equations namely continuity and momentum are used to solve the flow physics through and across the bladeless fan and SST k-? turbulence model has been used to predict the turbulence in the bladeless fan. The effect of outlet thicknesses and outlet angles have been varied for all the five aerofoil configurations mentioned and the volumetric flow at inlet have been adjusted from 5 LPS to 80 LPS. Outlet thickness is varied from 0.8, 1.0, 1.3, 1.5 and 2 mm and the slit angle is varied from 20 degrees to 80 degrees in step of 10 degrees. The results predicted that Eppler 473 aerofoil profile showed better performance when the thickness of slit and outlet angle has been fixed constant as 1 mm and 70 degree respectively. Also, the maximum discharge flow ratio is recorded for an inlet volumetric flow rate of 80 LPS and it is found to be 34.37. The present numerical study substantiated that outlet thickness plays a dominant role on the bladeless fan’s aerodynamic performance compared to outlet angle and aerodynamic shape considered in this numerical analysis. The contours of velocity, streamline and pressure of the bladeless fan have been discussed.