José Granja, Renan Rocha Ribeiro, Thomas Russo, Rodrigo Lameiras, Miguel Azenha
{"title":"温度对水泥浆体和混凝土早期弹性模量演化的影响","authors":"José Granja, Renan Rocha Ribeiro, Thomas Russo, Rodrigo Lameiras, Miguel Azenha","doi":"10.3151/jact.21.803","DOIUrl":null,"url":null,"abstract":"The influence of temperature on the hydration of cementitious materials has been traditionally modelled using the maturity concept and Arrhenius law. This approach yields a single material property, called apparent activation energy (Ea), that describes the whole temperature dependence. Determining Ea experimentally has sparked controversy, such as whether the different properties (e.g., compressive strength, tensile strength, E-modulus) exhibit different Ea, whether a single Ea value exists for the entire hydration process, or whether cement paste and concrete possess the same Ea. Furthermore, studies measuring Ea from elastic modulus measurements are truly scarce, likely due to experimental challenges with measuring this property at early-ages. This work investigated the influence of temperature on the elastic modulus evolution of cement paste and concrete. A single mix for each material was tested with the EMM-ARM (Elasticity Modulus Measurement through Ambient Response Method) methodology under three different isothermal conditions. The resulting elastic modulus evolution curves were used to derive Ea evolution curves from two traditional computation methods: the ‘speed’ method and the ‘derivative of speed’ method. Results showed that the elastic modulus evolution of both materials initially presented a constant Ea, independent of temperature and hydration development as preconized by the classical Arrhenius law. However, as hydration progressed to later stages, the activation energy exhibited evident dependencies on both temperature and hydration levels. Cement paste and concrete consistently exhibited different Ea values throughout hydration, with concrete having higher values. The use of the Ea curves to superimpose the different experimental elastic modulus evolution curves by means of the equivalent age concept led to near-perfect superpositions, strengthening the validity of this concept when applied to elastic modulus evolution.","PeriodicalId":14868,"journal":{"name":"Journal of Advanced Concrete Technology","volume":"11 4","pages":"0"},"PeriodicalIF":1.6000,"publicationDate":"2023-10-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Influence of Temperature in the Early-age Elastic Modulus Evolution of Cement Pastes and Concrete\",\"authors\":\"José Granja, Renan Rocha Ribeiro, Thomas Russo, Rodrigo Lameiras, Miguel Azenha\",\"doi\":\"10.3151/jact.21.803\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The influence of temperature on the hydration of cementitious materials has been traditionally modelled using the maturity concept and Arrhenius law. This approach yields a single material property, called apparent activation energy (Ea), that describes the whole temperature dependence. Determining Ea experimentally has sparked controversy, such as whether the different properties (e.g., compressive strength, tensile strength, E-modulus) exhibit different Ea, whether a single Ea value exists for the entire hydration process, or whether cement paste and concrete possess the same Ea. Furthermore, studies measuring Ea from elastic modulus measurements are truly scarce, likely due to experimental challenges with measuring this property at early-ages. This work investigated the influence of temperature on the elastic modulus evolution of cement paste and concrete. A single mix for each material was tested with the EMM-ARM (Elasticity Modulus Measurement through Ambient Response Method) methodology under three different isothermal conditions. The resulting elastic modulus evolution curves were used to derive Ea evolution curves from two traditional computation methods: the ‘speed’ method and the ‘derivative of speed’ method. Results showed that the elastic modulus evolution of both materials initially presented a constant Ea, independent of temperature and hydration development as preconized by the classical Arrhenius law. However, as hydration progressed to later stages, the activation energy exhibited evident dependencies on both temperature and hydration levels. Cement paste and concrete consistently exhibited different Ea values throughout hydration, with concrete having higher values. The use of the Ea curves to superimpose the different experimental elastic modulus evolution curves by means of the equivalent age concept led to near-perfect superpositions, strengthening the validity of this concept when applied to elastic modulus evolution.\",\"PeriodicalId\":14868,\"journal\":{\"name\":\"Journal of Advanced Concrete Technology\",\"volume\":\"11 4\",\"pages\":\"0\"},\"PeriodicalIF\":1.6000,\"publicationDate\":\"2023-10-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Advanced Concrete Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3151/jact.21.803\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"CONSTRUCTION & BUILDING TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Advanced Concrete Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3151/jact.21.803","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CONSTRUCTION & BUILDING TECHNOLOGY","Score":null,"Total":0}
Influence of Temperature in the Early-age Elastic Modulus Evolution of Cement Pastes and Concrete
The influence of temperature on the hydration of cementitious materials has been traditionally modelled using the maturity concept and Arrhenius law. This approach yields a single material property, called apparent activation energy (Ea), that describes the whole temperature dependence. Determining Ea experimentally has sparked controversy, such as whether the different properties (e.g., compressive strength, tensile strength, E-modulus) exhibit different Ea, whether a single Ea value exists for the entire hydration process, or whether cement paste and concrete possess the same Ea. Furthermore, studies measuring Ea from elastic modulus measurements are truly scarce, likely due to experimental challenges with measuring this property at early-ages. This work investigated the influence of temperature on the elastic modulus evolution of cement paste and concrete. A single mix for each material was tested with the EMM-ARM (Elasticity Modulus Measurement through Ambient Response Method) methodology under three different isothermal conditions. The resulting elastic modulus evolution curves were used to derive Ea evolution curves from two traditional computation methods: the ‘speed’ method and the ‘derivative of speed’ method. Results showed that the elastic modulus evolution of both materials initially presented a constant Ea, independent of temperature and hydration development as preconized by the classical Arrhenius law. However, as hydration progressed to later stages, the activation energy exhibited evident dependencies on both temperature and hydration levels. Cement paste and concrete consistently exhibited different Ea values throughout hydration, with concrete having higher values. The use of the Ea curves to superimpose the different experimental elastic modulus evolution curves by means of the equivalent age concept led to near-perfect superpositions, strengthening the validity of this concept when applied to elastic modulus evolution.
期刊介绍:
JACT is fast. Only 5 to 7 months from submission to publishing thanks to electronic file exchange between you, the reviewers and the editors.
JACT is high quality. Peer-reviewed by internationally renowned experts who return review comments to ensure the highest possible quality.
JACT is transparent. The status of your manuscript from submission to publishing can be viewed on our website, greatly reducing the frustration of being kept in the dark, possibly for over a year in the case of some journals.
JACT is cost-effective. Submission and subscription are free of charge . Full-text PDF files are available for the authors to open at their web sites.
Scope:
*Materials:
-Material properties
-Fresh concrete
-Hardened concrete
-High performance concrete
-Development of new materials
-Fiber reinforcement
*Maintenance and Rehabilitation:
-Durability and repair
-Strengthening/Rehabilitation
-LCC for concrete structures
-Environmant conscious materials
*Structures:
-Design and construction of RC and PC Structures
-Seismic design
-Safety against environmental disasters
-Failure mechanism and non-linear analysis/modeling
-Composite and mixed structures
*Other:
-Monitoring
-Aesthetics of concrete structures
-Other concrete related topics