沉积部件处理质量的特点

IF 0.7 4区材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Materials Science Pub Date : 2023-12-27 DOI:10.1007/s11003-023-00739-6

V. V. Kolomiyets, R. V. Antoshchenko, V. M. Lykyanenko, R. V. Ridnyi, S. O. Kharchenko, I. A. Fabrychnikova, S. A. Bogdanovych, O. A. Svirhun

{"title":"沉积部件处理质量的特点","authors":"V. V. Kolomiyets, R. V. Antoshchenko, V. M. Lykyanenko, R. V. Ridnyi, S. O. Kharchenko, I. A. Fabrychnikova, S. A. Bogdanovych, O. A. Svirhun","doi":"10.1007/s11003-023-00739-6","DOIUrl":null,"url":null,"abstract":"<p>The quality characteristics of the finishing treatment of deposited materials with cutters made of hard alloy and super hard material (hexanite-R) were investigated. During finishing treatment of the deposited parts, the low roughness of the treated surface was achieved when treated with hexanite-R cutters. The roughness of the treated surface depends on feed, cutting speed, shape of the cutter tip, its wear and hardness of deposited layer. The depth of the surface hardening of the layer treated with cutters is greater than turning the weld materials of low hardness. During turning with hexanite-R cutters compressive residual stresses are formed in the surface layer, which improve the operating characteristics of parts.</p>","PeriodicalId":18230,"journal":{"name":"Materials Science","volume":"71 1","pages":""},"PeriodicalIF":0.7000,"publicationDate":"2023-12-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Characteristics of the Quality of Deposited Parts Treatment\",\"authors\":\"V. V. Kolomiyets, R. V. Antoshchenko, V. M. Lykyanenko, R. V. Ridnyi, S. O. Kharchenko, I. A. Fabrychnikova, S. A. Bogdanovych, O. A. Svirhun\",\"doi\":\"10.1007/s11003-023-00739-6\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>The quality characteristics of the finishing treatment of deposited materials with cutters made of hard alloy and super hard material (hexanite-R) were investigated. During finishing treatment of the deposited parts, the low roughness of the treated surface was achieved when treated with hexanite-R cutters. The roughness of the treated surface depends on feed, cutting speed, shape of the cutter tip, its wear and hardness of deposited layer. The depth of the surface hardening of the layer treated with cutters is greater than turning the weld materials of low hardness. During turning with hexanite-R cutters compressive residual stresses are formed in the surface layer, which improve the operating characteristics of parts.</p>\",\"PeriodicalId\":18230,\"journal\":{\"name\":\"Materials Science\",\"volume\":\"71 1\",\"pages\":\"\"},\"PeriodicalIF\":0.7000,\"publicationDate\":\"2023-12-27\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Materials Science\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1007/s11003-023-00739-6\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materials Science","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s11003-023-00739-6","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}

引用次数: 0

摘要

研究了使用硬质合金和超硬材料（己内酯-R）制成的刀具对沉积材料进行精加工处理的质量特性。在对沉积部件进行精加工处理时，使用己内酯-R 铣刀处理的表面粗糙度较低。处理表面的粗糙度取决于进给量、切割速度、刀尖形状、磨损程度和沉积层的硬度。与车削硬度较低的焊接材料相比，使用刀具处理的表面硬化层深度更大。在使用己内酯-R 铣刀进行车削时，表层会形成压缩残余应力，从而改善零件的运行特性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

摘要图片

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

Characteristics of the Quality of Deposited Parts Treatment

The quality characteristics of the finishing treatment of deposited materials with cutters made of hard alloy and super hard material (hexanite-R) were investigated. During finishing treatment of the deposited parts, the low roughness of the treated surface was achieved when treated with hexanite-R cutters. The roughness of the treated surface depends on feed, cutting speed, shape of the cutter tip, its wear and hardness of deposited layer. The depth of the surface hardening of the layer treated with cutters is greater than turning the weld materials of low hardness. During turning with hexanite-R cutters compressive residual stresses are formed in the surface layer, which improve the operating characteristics of parts.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Materials Science 工程技术-材料科学：综合

CiteScore

1.60

自引率

44.40%

发文量

审稿时长

4-8 weeks

期刊介绍： Materials Science reports on current research into such problems as cracking, fatigue and fracture, especially in active environments as well as corrosion and anticorrosion protection of structural metallic and polymer materials, and the development of new materials.