The effects of imposed swirling flow on the transport and deposition of particulate pollutants in the 90° industrial duct bends: An Eulerian-Lagrangian approach

Duct bend is one of the important parts of ventilation and dust removal systems, and particles deposited in curved ducts can reduce system efficiency or cause erosion on the bend wall. To investigate whether particle deposition is affected by imposed swirl on fluid flow, this article combines the RSM turbulence model and the Discrete Phase Model (DPM) to predict the deposition efficiency of particles in the bend under high Reynolds number conditions. The results show that the imposed swirl flow modifies the secondary flow initially dominated by the pressure gradient caused by the curvature effect. With the gradual increase of the swirl number ( S n), the deposition efficiency of the particles gradually decreased. However, when the swirl number is low ( S n ≤ 0.17), particles with smaller Stokes numbers are more susceptible to the intensity of turbulence. The higher the turbulence intensity near the wall, the easier it is for low inertia particles ( St ≤ 0.456) to deposit. The higher swirl intensity dominates the centrifugal force, reduces the turbulent intensity in the central region of the duct, improves the stability of the airflow and makes it easier for particles with larger inertia ( St ≥ 0.811) to pass through the bend.