Effects of Drilling Number and Distribution on Fracture Using the Pulse Plasma on Tight Sand Reservoir

The permeability of unconventional reservoirs is extremely low, resulting in their drainage area being limited to tens of feet. Therefore, researchers have developed an effective stimulation technology that can be used in combination with conventional hydraulic fracturing, namely, pulsed plasma fracturing technology. Pulsed plasma fracturing technology is an efficient and environmentally friendly auxiliary hydraulic fracturing stimulation technology. However, most existing studies have focused only on the effect of pulsed plasma fracturing on single wells, ignoring the effect of the number and distribution of wells drilled on pulsed plasma fracturing. In this paper, pulsed plasma fracturing is studied by a self-built pulsed plasma experimental platform and nonlinear finite element software. First, the generation and propagation mechanism of shock wave, fracture type, and stress field analysis of rock mass in pulsed plasma fracturing technology are discussed. The double-well experiment was carried out by using the experimental platform, and the fracture law of fractures under different wellhead distribution conditions was obtained. In addition, a multiwell mathematical model is established by using the combination of the Euler method and Lagrange method to simulate the interaction between fluid and solid, that is, arbitrary Lagrangian Eulerian (ALE) multimaterial fluid-solid coupling method and the influence of drilling times and wellhead distribution on pulsed plasma fracturing is discussed. Stress analysis shows that the rock is mainly affected by ground stress, liquid column pressure, and shock wave pressure. The experimental results show that the discharge voltage is positively correlated with the shock wave pressure on the rock. The distribution of different wellheads affects the distribution and length of fractures. The double-well experiment makes the fractures easier to fracture. The simulation results show that the fracture length in the connection direction of the two wells is longer, and the fracture length in the vertical direction is shorter. This shows that the number and distribution of drilling affect the initiation and propagation of fractures.