Computational investigation and validation of new MEXICO experiment

A computational investigation of New MEXICO test cases operating under axial flow conditions is reported. Three wind speed cases (10, 15, 24 m/s) corresponding to three different tip speed ratios (10, 6.67, 4.17) when the turbine operates at 425.1 rpm were considered. ANSYS CFX 2021R1 was employed to perform simulations using Single Reference Frame (SRF) and Multiple Reference Frame (MRF) approaches. The flow field is computed by solving unsteady Reynolds Averaged Navier-Stokes (uRANS) equations coupled with SST k-ω turbulence model and Gamma-Theta transition model. Validation involved comparing CFD-predicted integral quantities, static pressure distributions, and loads with corresponding experimental values demonstrating reasonably good agreement at all three wind speeds. Overall, SRF exhibited slightly better wake predictions (hypothetical), while MRF predictions were closer to measurements for integral quantities, static pressure and loads. This study demonstrates the utility of uRANS-based 3D CFD computations in wind turbine aerodynamics studies.