Xue Liu, Jiawei Zhang, Yi He, Jiamin Huang, Xiaoping Ma, Xiaoman Zhang, M. Lu, Yu Xin
{"title":"滑弧放电与 CuCu2O 电催化相结合用于合成氨生产","authors":"Xue Liu, Jiawei Zhang, Yi He, Jiamin Huang, Xiaoping Ma, Xiaoman Zhang, M. Lu, Yu Xin","doi":"10.1088/2058-6272/ad2d10","DOIUrl":null,"url":null,"abstract":"\n Highly efficient and green ammonia production is an important demand for modern agriculture. In this paper, a two-step ammonia production method is developed using a gliding arc discharge in combination with Cu/Cu2O electrocatalysis. In this method, NOx is provided by the gliding arc discharge and then electrolyzed by Cu/Cu2O after alkaline absorption. The electrical characteristics, the optical characteristics and the NOx production are investigated in discharges at different input voltage and the gas flow. The dependence of ammonia production through Cu/Cu2O electrocatalysis on pH value and reduction potential are determined by colorimetric method. In our study, two discharge modes are observed. At high input voltage and low gas flow, the discharge is operated with a stable plasma channel which is called the steady arc gliding discharge mode (A-G mode). As lowering input voltage and raising gas flow, the plasma channel is destroyed and high frequency breakdown occurs instead, which is known as the breakdown gliding discharge mode (B-G mode). The optimal NOx production of 7.34 mmol/h is obtained in the transition stage of the two discharge modes. The ammonia yield reaches 0.402 mmol/h/cm2 at pH value of 12.7 and reduction potential of -1.0 V vs RHE.","PeriodicalId":506986,"journal":{"name":"Plasma Science and Technology","volume":"21 11","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-02-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Gliding arc discharge in combination with CuCu2O electrocatalysis for ammonia production\",\"authors\":\"Xue Liu, Jiawei Zhang, Yi He, Jiamin Huang, Xiaoping Ma, Xiaoman Zhang, M. Lu, Yu Xin\",\"doi\":\"10.1088/2058-6272/ad2d10\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n Highly efficient and green ammonia production is an important demand for modern agriculture. In this paper, a two-step ammonia production method is developed using a gliding arc discharge in combination with Cu/Cu2O electrocatalysis. In this method, NOx is provided by the gliding arc discharge and then electrolyzed by Cu/Cu2O after alkaline absorption. The electrical characteristics, the optical characteristics and the NOx production are investigated in discharges at different input voltage and the gas flow. The dependence of ammonia production through Cu/Cu2O electrocatalysis on pH value and reduction potential are determined by colorimetric method. In our study, two discharge modes are observed. At high input voltage and low gas flow, the discharge is operated with a stable plasma channel which is called the steady arc gliding discharge mode (A-G mode). As lowering input voltage and raising gas flow, the plasma channel is destroyed and high frequency breakdown occurs instead, which is known as the breakdown gliding discharge mode (B-G mode). The optimal NOx production of 7.34 mmol/h is obtained in the transition stage of the two discharge modes. The ammonia yield reaches 0.402 mmol/h/cm2 at pH value of 12.7 and reduction potential of -1.0 V vs RHE.\",\"PeriodicalId\":506986,\"journal\":{\"name\":\"Plasma Science and Technology\",\"volume\":\"21 11\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-02-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Plasma Science and Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1088/2058-6272/ad2d10\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Plasma Science and Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1088/2058-6272/ad2d10","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Gliding arc discharge in combination with CuCu2O electrocatalysis for ammonia production
Highly efficient and green ammonia production is an important demand for modern agriculture. In this paper, a two-step ammonia production method is developed using a gliding arc discharge in combination with Cu/Cu2O electrocatalysis. In this method, NOx is provided by the gliding arc discharge and then electrolyzed by Cu/Cu2O after alkaline absorption. The electrical characteristics, the optical characteristics and the NOx production are investigated in discharges at different input voltage and the gas flow. The dependence of ammonia production through Cu/Cu2O electrocatalysis on pH value and reduction potential are determined by colorimetric method. In our study, two discharge modes are observed. At high input voltage and low gas flow, the discharge is operated with a stable plasma channel which is called the steady arc gliding discharge mode (A-G mode). As lowering input voltage and raising gas flow, the plasma channel is destroyed and high frequency breakdown occurs instead, which is known as the breakdown gliding discharge mode (B-G mode). The optimal NOx production of 7.34 mmol/h is obtained in the transition stage of the two discharge modes. The ammonia yield reaches 0.402 mmol/h/cm2 at pH value of 12.7 and reduction potential of -1.0 V vs RHE.