关于数值微分法在确定疲劳裂纹增长率中的应用

S. Monin, M. A. Gorbovets, I. A. Khodinev
{"title":"关于数值微分法在确定疲劳裂纹增长率中的应用","authors":"S. Monin, M. A. Gorbovets, I. A. Khodinev","doi":"10.26896/1028-6861-2024-90-2-53-61","DOIUrl":null,"url":null,"abstract":"Using a sample of test results from 68 compact eccentric tensile specimens made of titanium alloys, nickel alloys and steel, the effect of the choice of numerical differentiation method (secant method and the method of differential polynomials on three, five and seven points) used to calculate the fatigue crack growth rate on characteristics of the linear section of the kinetic diagram of the fatigue failure. The purpose of the study is to determine the advantages, disadvantages and consistent patterns of the considered methods. The coefficient of determination R 2, integral criterion χ which characterizes the difference between the predicted and actual number of cycles corresponding to the section of stable crack growth, and correlation between the logarithms of the Paris constants for alloys of the same class were used as criteria for the correct choice of the method of numerical differentiation. The main results and conclusions of the study: the use of the method of differential polynomials over three points compared to the secant method slightly increases the correlation between the logarithms of the fatigue crack growth rate and the range of the stress intensity factor (an increase in R 2) and increases the difference between the calculated and experimental number of cycles corresponding to stable crack growth (an increase in χ). However, when determining the fatigue crack growth rate by the method of differential polynomials for five and seven points, a more significant smoothing of the experimental data is observed, accompanied by a significant increase in R 2 and a decrease in χ; proximity to zero of the integral accuracy parameter χ is a necessary but not sufficient criterion for good agreement between the test result and the mathematical model that describes it, while the combination of parameters χ and R 2 uniquely forms this criterion; the choice of the method of numerical differentiation does not affect the correlation of the logarithms of the constants of the Paris equation.","PeriodicalId":504498,"journal":{"name":"Industrial laboratory. Diagnostics of materials","volume":"18 9‐10","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-02-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"On the application of numerical differentiation methods to the determination of the fatigue crack growth rate\",\"authors\":\"S. Monin, M. A. Gorbovets, I. A. Khodinev\",\"doi\":\"10.26896/1028-6861-2024-90-2-53-61\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Using a sample of test results from 68 compact eccentric tensile specimens made of titanium alloys, nickel alloys and steel, the effect of the choice of numerical differentiation method (secant method and the method of differential polynomials on three, five and seven points) used to calculate the fatigue crack growth rate on characteristics of the linear section of the kinetic diagram of the fatigue failure. The purpose of the study is to determine the advantages, disadvantages and consistent patterns of the considered methods. The coefficient of determination R 2, integral criterion χ which characterizes the difference between the predicted and actual number of cycles corresponding to the section of stable crack growth, and correlation between the logarithms of the Paris constants for alloys of the same class were used as criteria for the correct choice of the method of numerical differentiation. The main results and conclusions of the study: the use of the method of differential polynomials over three points compared to the secant method slightly increases the correlation between the logarithms of the fatigue crack growth rate and the range of the stress intensity factor (an increase in R 2) and increases the difference between the calculated and experimental number of cycles corresponding to stable crack growth (an increase in χ). However, when determining the fatigue crack growth rate by the method of differential polynomials for five and seven points, a more significant smoothing of the experimental data is observed, accompanied by a significant increase in R 2 and a decrease in χ; proximity to zero of the integral accuracy parameter χ is a necessary but not sufficient criterion for good agreement between the test result and the mathematical model that describes it, while the combination of parameters χ and R 2 uniquely forms this criterion; the choice of the method of numerical differentiation does not affect the correlation of the logarithms of the constants of the Paris equation.\",\"PeriodicalId\":504498,\"journal\":{\"name\":\"Industrial laboratory. Diagnostics of materials\",\"volume\":\"18 9‐10\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-02-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Industrial laboratory. Diagnostics of materials\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.26896/1028-6861-2024-90-2-53-61\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Industrial laboratory. Diagnostics of materials","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.26896/1028-6861-2024-90-2-53-61","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

利用 68 个由钛合金、镍合金和钢制成的紧凑型偏心拉伸试样的测试结果样本,研究了用于计算疲劳裂纹生长率的数值微分法(三次方法和三点、五点和七点微分多项式法)的选择对疲劳破坏动力学图线性截面特征的影响。研究的目的是确定所考虑方法的优缺点和一致模式。确定系数 R 2、表征稳定裂纹增长段对应的预测循环数与实际循环数之间差异的积分标准 χ 以及同类合金的巴黎常数对数之间的相关性被用作正确选择数值微分方法的标准。研究的主要结果和结论:与正割法相比,使用三点微分多项式法会略微增加疲劳裂纹增长速率对数与应力强度因子范围之间的相关性(R 2 增加),并增加稳定裂纹增长对应的计算循环次数与实验循环次数之间的差异(χ 增加)。然而,当采用微分多项式法确定五点和七点的疲劳裂纹生长率时,实验数据出现了更明显的平滑,同时 R 2 显著增加,χ 下降;积分精度参数 χ 接近于零是试验结果与描述试验结果的数学模型之间保持良好一致性的一个必要但不充分的标准,而参数 χ 和 R 2 的组合则唯一地构成了这一标准;数值微分方法的选择并不影响巴黎方程常数对数的相关性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
On the application of numerical differentiation methods to the determination of the fatigue crack growth rate
Using a sample of test results from 68 compact eccentric tensile specimens made of titanium alloys, nickel alloys and steel, the effect of the choice of numerical differentiation method (secant method and the method of differential polynomials on three, five and seven points) used to calculate the fatigue crack growth rate on characteristics of the linear section of the kinetic diagram of the fatigue failure. The purpose of the study is to determine the advantages, disadvantages and consistent patterns of the considered methods. The coefficient of determination R 2, integral criterion χ which characterizes the difference between the predicted and actual number of cycles corresponding to the section of stable crack growth, and correlation between the logarithms of the Paris constants for alloys of the same class were used as criteria for the correct choice of the method of numerical differentiation. The main results and conclusions of the study: the use of the method of differential polynomials over three points compared to the secant method slightly increases the correlation between the logarithms of the fatigue crack growth rate and the range of the stress intensity factor (an increase in R 2) and increases the difference between the calculated and experimental number of cycles corresponding to stable crack growth (an increase in χ). However, when determining the fatigue crack growth rate by the method of differential polynomials for five and seven points, a more significant smoothing of the experimental data is observed, accompanied by a significant increase in R 2 and a decrease in χ; proximity to zero of the integral accuracy parameter χ is a necessary but not sufficient criterion for good agreement between the test result and the mathematical model that describes it, while the combination of parameters χ and R 2 uniquely forms this criterion; the choice of the method of numerical differentiation does not affect the correlation of the logarithms of the constants of the Paris equation.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Study of the effect of macrogeometry of rubbing steel bodies at their point contact on the tribological characteristics of lubricants under boundary lubrication conditions Study of the mechanical behavior and multiscale simulation of the crack propagation in a bilinga wooden beam Studying the estimates of gamma distribution parameters Analysis of the effect of the direction of reinforcement of a fibrous composite material on the inhomogeneity of localization of deformations and stresses using the method of thermoelastic response Study of the effect of static stresses on the hydrogen content and electrochemical characteristics of steels of different types
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1