Palladium/coconut husk biochar composite material as an effective electrocatalyst for ethanol oxidation reaction

This study utilised coconut husk biochar as an alternative sustainable carbon support for Pd-based electrocatalyst for ethanol oxidation reaction in basic medium. Coconut husk biochar (BC) was prepared via slow pyrolysis at 800 °C for 1 h at a ramp rate of 5 °C min−1. The Pd/BC catalyst was prepared via borohydride-facilitated reduction of palladium chloride solution. TEM analysis revealed good dispersion of the Pd nanoparticles on the biochar support with particle size ranging from 1.9 to 3.4 nm. Cyclic voltammetry (CV) measurements of Pd/BC in 1.0 M ethanol in 0.1 M KOH gave an on-set potential of −0.615 V (versus Ag/AgCl) with a forward peak current density of 23.87 mA cm−2, which is slightly higher than the commercial Pd/C catalyst. The Pd/BC also has a higher electrochemical stability and durability than the commercial Pd/C catalyst based on chronoamperometry studies (i.e., 44.43% versus 39.64% current retention). The synthesised coconut husk biochar–supported Pd catalyst exhibited promising results for ethanol oxidation reaction for alkaline direct ethanol fuel cell application.