F. Ducobu, Nithyaraaj Kugalur Palanisamy, G. Briffoteaux, M. Gobert, Daniel Tuyttens, Pedro Arrazola Arriola, E. Rivière-Lorphèvre
{"title":"通过多目标代用辅助算法确定机械加工建模的构成模型和摩擦模型参数--应用于 Ti6Al4V 的 ALE 正交切削","authors":"F. Ducobu, Nithyaraaj Kugalur Palanisamy, G. Briffoteaux, M. Gobert, Daniel Tuyttens, Pedro Arrazola Arriola, E. Rivière-Lorphèvre","doi":"10.1115/1.4065223","DOIUrl":null,"url":null,"abstract":"\n The evolution of high-performance computing facilitates the simulation of manufacturing processes. The prediction accuracy of a numerical model of the cutting process is closely associated with the selection of constitutive and friction models. The reliability and the accuracy of these models highly depend on the value of the parameters involved in the definition of the cutting process. These model parameters are determined using a direct method or an inverse method. However, these identification procedures often neglect the link between the parameters of the material and the friction models. This paper introduces a novel approach to inversely identify the best parameters value for both models at the same time and by taking into account multiple cutting conditions in the optimization routine. An Artificial Intelligence (AI) framework that combines the finite element modeling with an Adaptive Bayesian Multi-objective Evolutionary Algorithm (AB-MOEA) is developed, where the objective is to minimize the deviation between the experimental and the numerical results. The Arbitrary Lagrangian Eulerian (ALE) formulation and the Ti6Al4V alloy are selected to demonstrate its applicability. The investigation shows that the developed AI platform can identify the best parameters values with low computational time and resources. The identified parameters values predicted the cutting and feed forces within a deviation of less than 4% from the experiments for all the cutting conditions considered in this work.","PeriodicalId":507815,"journal":{"name":"Journal of Manufacturing Science and Engineering","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2024-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Identification of the Constitutive and Friction Models Parameters via a Multi-Objective Surrogate-Assisted Algorithm for the Modeling of Machining - Application to ALE orthogonal cutting of Ti6Al4V\",\"authors\":\"F. Ducobu, Nithyaraaj Kugalur Palanisamy, G. Briffoteaux, M. Gobert, Daniel Tuyttens, Pedro Arrazola Arriola, E. Rivière-Lorphèvre\",\"doi\":\"10.1115/1.4065223\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n The evolution of high-performance computing facilitates the simulation of manufacturing processes. The prediction accuracy of a numerical model of the cutting process is closely associated with the selection of constitutive and friction models. The reliability and the accuracy of these models highly depend on the value of the parameters involved in the definition of the cutting process. These model parameters are determined using a direct method or an inverse method. However, these identification procedures often neglect the link between the parameters of the material and the friction models. This paper introduces a novel approach to inversely identify the best parameters value for both models at the same time and by taking into account multiple cutting conditions in the optimization routine. An Artificial Intelligence (AI) framework that combines the finite element modeling with an Adaptive Bayesian Multi-objective Evolutionary Algorithm (AB-MOEA) is developed, where the objective is to minimize the deviation between the experimental and the numerical results. The Arbitrary Lagrangian Eulerian (ALE) formulation and the Ti6Al4V alloy are selected to demonstrate its applicability. The investigation shows that the developed AI platform can identify the best parameters values with low computational time and resources. The identified parameters values predicted the cutting and feed forces within a deviation of less than 4% from the experiments for all the cutting conditions considered in this work.\",\"PeriodicalId\":507815,\"journal\":{\"name\":\"Journal of Manufacturing Science and Engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-04-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Manufacturing Science and Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1115/1.4065223\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Manufacturing Science and Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1115/1.4065223","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Identification of the Constitutive and Friction Models Parameters via a Multi-Objective Surrogate-Assisted Algorithm for the Modeling of Machining - Application to ALE orthogonal cutting of Ti6Al4V
The evolution of high-performance computing facilitates the simulation of manufacturing processes. The prediction accuracy of a numerical model of the cutting process is closely associated with the selection of constitutive and friction models. The reliability and the accuracy of these models highly depend on the value of the parameters involved in the definition of the cutting process. These model parameters are determined using a direct method or an inverse method. However, these identification procedures often neglect the link between the parameters of the material and the friction models. This paper introduces a novel approach to inversely identify the best parameters value for both models at the same time and by taking into account multiple cutting conditions in the optimization routine. An Artificial Intelligence (AI) framework that combines the finite element modeling with an Adaptive Bayesian Multi-objective Evolutionary Algorithm (AB-MOEA) is developed, where the objective is to minimize the deviation between the experimental and the numerical results. The Arbitrary Lagrangian Eulerian (ALE) formulation and the Ti6Al4V alloy are selected to demonstrate its applicability. The investigation shows that the developed AI platform can identify the best parameters values with low computational time and resources. The identified parameters values predicted the cutting and feed forces within a deviation of less than 4% from the experiments for all the cutting conditions considered in this work.