受液氮冷却冲击的高温岩石孔隙结构演变及损伤特征研究

IF 4 2区 工程技术 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY International Journal of Damage Mechanics Pub Date : 2024-05-01 DOI:10.1177/10567895241247324
Can Du, Jing Bi, Yu Zhao, Chaolin Wang, Wei Tang, Shuailong Lian
{"title":"受液氮冷却冲击的高温岩石孔隙结构演变及损伤特征研究","authors":"Can Du, Jing Bi, Yu Zhao, Chaolin Wang, Wei Tang, Shuailong Lian","doi":"10.1177/10567895241247324","DOIUrl":null,"url":null,"abstract":"Liquid nitrogen (LN<jats:sub>2</jats:sub>) can be utilized in the development of enhanced geothermal systems, as well as for deep/ultra-deep hydrocarbon reservoir stimulation, fire suppression, and other high-temperature geological projects. It is a crucial issue in the utilization of LN<jats:sub>2</jats:sub> to investigate the pore structure evolution, permeability, and damage characteristics of high-temperature rocks under the influence of LN<jats:sub>2</jats:sub> cooling shock. These rocks were first slowly heated to 150∼600°C and held for 2 h, followed by LN<jats:sub>2</jats:sub> or natural cooling. The evolution of pore volume in high-temperature rocks affected by liquid nitrogen cooling was quantified. T<jats:sub>2</jats:sub> cutoff values were determined through centrifugal tests, while the contents of irreducible and mobile fluids were estimated. Based on the aforementioned analysis as well as changes in irreducible fluid saturation, pore throat, tortuosity, and permeability, this study examines the closure and development of pores along with permeability behavior. The findings suggest that, despite a more pronounced decrease in porosity at lower heating temperatures, LN<jats:sub>2</jats:sub> cooling specimens exhibit superior pore connectivity and permeability compared to those cooled naturally. LN<jats:sub>2</jats:sub> stimulation not only induces crack initiation and propagation but also results in further cooling induced densification based on heating densification. 225°C is considered to be the optimal temperature for cooling contraction induced densification in this study. At higher heating temperatures, the damage to rock cooled with LN<jats:sub>2</jats:sub> is more severe than that of naturally cooled. This results in a greater increase in porosity, movable fluid content and proportion, and permeability of LN<jats:sub>2</jats:sub> cooled specimens compared to naturally cooled specimens. The damage mechanism can be better understood by the constructed damage model that coordinates the pore increase/decrease and mutual pore transformation from the perspective of pore evolution.","PeriodicalId":13837,"journal":{"name":"International Journal of Damage Mechanics","volume":null,"pages":null},"PeriodicalIF":4.0000,"publicationDate":"2024-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Investigation of pore structure evolution and damage characteristics of high temperature rocks subjected to liquid nitrogen cooling shock\",\"authors\":\"Can Du, Jing Bi, Yu Zhao, Chaolin Wang, Wei Tang, Shuailong Lian\",\"doi\":\"10.1177/10567895241247324\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Liquid nitrogen (LN<jats:sub>2</jats:sub>) can be utilized in the development of enhanced geothermal systems, as well as for deep/ultra-deep hydrocarbon reservoir stimulation, fire suppression, and other high-temperature geological projects. It is a crucial issue in the utilization of LN<jats:sub>2</jats:sub> to investigate the pore structure evolution, permeability, and damage characteristics of high-temperature rocks under the influence of LN<jats:sub>2</jats:sub> cooling shock. These rocks were first slowly heated to 150∼600°C and held for 2 h, followed by LN<jats:sub>2</jats:sub> or natural cooling. The evolution of pore volume in high-temperature rocks affected by liquid nitrogen cooling was quantified. T<jats:sub>2</jats:sub> cutoff values were determined through centrifugal tests, while the contents of irreducible and mobile fluids were estimated. Based on the aforementioned analysis as well as changes in irreducible fluid saturation, pore throat, tortuosity, and permeability, this study examines the closure and development of pores along with permeability behavior. The findings suggest that, despite a more pronounced decrease in porosity at lower heating temperatures, LN<jats:sub>2</jats:sub> cooling specimens exhibit superior pore connectivity and permeability compared to those cooled naturally. LN<jats:sub>2</jats:sub> stimulation not only induces crack initiation and propagation but also results in further cooling induced densification based on heating densification. 225°C is considered to be the optimal temperature for cooling contraction induced densification in this study. At higher heating temperatures, the damage to rock cooled with LN<jats:sub>2</jats:sub> is more severe than that of naturally cooled. This results in a greater increase in porosity, movable fluid content and proportion, and permeability of LN<jats:sub>2</jats:sub> cooled specimens compared to naturally cooled specimens. The damage mechanism can be better understood by the constructed damage model that coordinates the pore increase/decrease and mutual pore transformation from the perspective of pore evolution.\",\"PeriodicalId\":13837,\"journal\":{\"name\":\"International Journal of Damage Mechanics\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.0000,\"publicationDate\":\"2024-05-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Damage Mechanics\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1177/10567895241247324\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Damage Mechanics","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1177/10567895241247324","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

液氮(LN2)可用于开发强化地热系统,以及深层/超深层油气藏激发、灭火和其他高温地质项目。研究高温岩石在 LN2 冷却冲击作用下的孔隙结构演变、渗透性和破坏特征是利用 LN2 的关键问题。首先将这些岩石缓慢加热至 150∼600°C 并保持 2 小时,然后进行 LN2 冷却或自然冷却。对受液氮冷却影响的高温岩石孔隙体积的演变进行了量化。通过离心试验确定了 T2 临界值,同时估算了不可还原流体和流动流体的含量。根据上述分析以及不可还原流体饱和度、孔喉、迂回度和渗透率的变化,本研究对孔隙的闭合和发育以及渗透率行为进行了研究。研究结果表明,尽管在较低的加热温度下孔隙率会有更明显的下降,但与自然冷却的试样相比,LN2 冷却试样表现出更优越的孔隙连通性和渗透性。LN2 刺激不仅能诱导裂纹的产生和扩展,还能在加热致密化的基础上进一步冷却致密化。本研究认为 225°C 是冷却收缩诱导致密化的最佳温度。在较高的加热温度下,用 LN2 冷却的岩石比自然冷却的岩石受到的破坏更严重。这导致与自然冷却试样相比,LN2 冷却试样的孔隙度、可移动流体含量和比例以及渗透率都有更大的增加。所构建的损伤模型从孔隙演化的角度协调了孔隙增减和孔隙相互转化,可以更好地理解损伤机理。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Investigation of pore structure evolution and damage characteristics of high temperature rocks subjected to liquid nitrogen cooling shock
Liquid nitrogen (LN2) can be utilized in the development of enhanced geothermal systems, as well as for deep/ultra-deep hydrocarbon reservoir stimulation, fire suppression, and other high-temperature geological projects. It is a crucial issue in the utilization of LN2 to investigate the pore structure evolution, permeability, and damage characteristics of high-temperature rocks under the influence of LN2 cooling shock. These rocks were first slowly heated to 150∼600°C and held for 2 h, followed by LN2 or natural cooling. The evolution of pore volume in high-temperature rocks affected by liquid nitrogen cooling was quantified. T2 cutoff values were determined through centrifugal tests, while the contents of irreducible and mobile fluids were estimated. Based on the aforementioned analysis as well as changes in irreducible fluid saturation, pore throat, tortuosity, and permeability, this study examines the closure and development of pores along with permeability behavior. The findings suggest that, despite a more pronounced decrease in porosity at lower heating temperatures, LN2 cooling specimens exhibit superior pore connectivity and permeability compared to those cooled naturally. LN2 stimulation not only induces crack initiation and propagation but also results in further cooling induced densification based on heating densification. 225°C is considered to be the optimal temperature for cooling contraction induced densification in this study. At higher heating temperatures, the damage to rock cooled with LN2 is more severe than that of naturally cooled. This results in a greater increase in porosity, movable fluid content and proportion, and permeability of LN2 cooled specimens compared to naturally cooled specimens. The damage mechanism can be better understood by the constructed damage model that coordinates the pore increase/decrease and mutual pore transformation from the perspective of pore evolution.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
International Journal of Damage Mechanics
International Journal of Damage Mechanics 工程技术-材料科学:综合
CiteScore
8.70
自引率
26.20%
发文量
48
审稿时长
5.4 months
期刊介绍: Featuring original, peer-reviewed papers by leading specialists from around the world, the International Journal of Damage Mechanics covers new developments in the science and engineering of fracture and damage mechanics. Devoted to the prompt publication of original papers reporting the results of experimental or theoretical work on any aspect of research in the mechanics of fracture and damage assessment, the journal provides an effective mechanism to disseminate information not only within the research community but also between the reseach laboratory and industrial design department. The journal also promotes and contributes to development of the concept of damage mechanics. This journal is a member of the Committee on Publication Ethics (COPE).
期刊最新文献
Experimental study on the mechanical properties of red sandstone with fractures under different loading rates Experimental analysis of extrusion-based additive manufacturing process of bio-composite NiTi alloy Damage investigation of hybrid flax-glass/epoxy composites subjected to impact fatigue under water ageing A review of multiaxial low-cycle fatigue criteria for life prediction of metals Damage and fracture studies of continuous flax fiber-reinforced composites 3D printed by in-nozzle impregnation additive manufacturing
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1