Felipe Gonçalves Di Nisio, Thiago Antonini Alves, Neri Volpato
{"title":"在 MEX 填充策略中通过微珠宽度变化获得的独特多孔介质的渗透性和孔隙度分析","authors":"Felipe Gonçalves Di Nisio, Thiago Antonini Alves, Neri Volpato","doi":"10.1007/s11242-024-02087-8","DOIUrl":null,"url":null,"abstract":"<div><p>Additive manufacturing (AM) allows the production of the internal structure of porous media (PM) with porosity and permeability tailored for a specific application. Material extrusion (MEX) AM enables the fabrication of a lattice-type porous structure by varying process parameters, usually applying the zigzag raster filling strategy. In a recent study, a Variable Bead Width Porous Filling (VBWPF) strategy was proposed, which generates pores by changing the printing speed during filament deposition and resulting in a unique porous structure with less pore interconnectivity. Specific pores’ dimensions and distribution on the layer can be obtained with the strategy’s parameters. In this work, different configurations of the VBWPF strategy were produced, and their porosity and permeability were measured experimentally. A PM with traditional raster filling (lattice structure) was also printed and measured for comparison. The porous structures of different VBWPF configurations were analyzed with micro-computed tomography (µCT). The results showed that VBWPF parameters were able to modify the porous structure obtained, changing the porosity and permeability of the PM. The PM produced exhibited 27% lower porosity and 55% lower permeability than the traditional raster filling PM with similar pore widths. These unique characteristics open up the field for applications of PM obtained through AM.</p></div>","PeriodicalId":804,"journal":{"name":"Transport in Porous Media","volume":null,"pages":null},"PeriodicalIF":2.7000,"publicationDate":"2024-04-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Permeability and Porosity Analysis of a Unique Porous Media Obtained by Bead Width Variation in a MEX Filling Strategy\",\"authors\":\"Felipe Gonçalves Di Nisio, Thiago Antonini Alves, Neri Volpato\",\"doi\":\"10.1007/s11242-024-02087-8\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Additive manufacturing (AM) allows the production of the internal structure of porous media (PM) with porosity and permeability tailored for a specific application. Material extrusion (MEX) AM enables the fabrication of a lattice-type porous structure by varying process parameters, usually applying the zigzag raster filling strategy. In a recent study, a Variable Bead Width Porous Filling (VBWPF) strategy was proposed, which generates pores by changing the printing speed during filament deposition and resulting in a unique porous structure with less pore interconnectivity. Specific pores’ dimensions and distribution on the layer can be obtained with the strategy’s parameters. In this work, different configurations of the VBWPF strategy were produced, and their porosity and permeability were measured experimentally. A PM with traditional raster filling (lattice structure) was also printed and measured for comparison. The porous structures of different VBWPF configurations were analyzed with micro-computed tomography (µCT). The results showed that VBWPF parameters were able to modify the porous structure obtained, changing the porosity and permeability of the PM. The PM produced exhibited 27% lower porosity and 55% lower permeability than the traditional raster filling PM with similar pore widths. These unique characteristics open up the field for applications of PM obtained through AM.</p></div>\",\"PeriodicalId\":804,\"journal\":{\"name\":\"Transport in Porous Media\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.7000,\"publicationDate\":\"2024-04-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Transport in Porous Media\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11242-024-02087-8\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Transport in Porous Media","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s11242-024-02087-8","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
Permeability and Porosity Analysis of a Unique Porous Media Obtained by Bead Width Variation in a MEX Filling Strategy
Additive manufacturing (AM) allows the production of the internal structure of porous media (PM) with porosity and permeability tailored for a specific application. Material extrusion (MEX) AM enables the fabrication of a lattice-type porous structure by varying process parameters, usually applying the zigzag raster filling strategy. In a recent study, a Variable Bead Width Porous Filling (VBWPF) strategy was proposed, which generates pores by changing the printing speed during filament deposition and resulting in a unique porous structure with less pore interconnectivity. Specific pores’ dimensions and distribution on the layer can be obtained with the strategy’s parameters. In this work, different configurations of the VBWPF strategy were produced, and their porosity and permeability were measured experimentally. A PM with traditional raster filling (lattice structure) was also printed and measured for comparison. The porous structures of different VBWPF configurations were analyzed with micro-computed tomography (µCT). The results showed that VBWPF parameters were able to modify the porous structure obtained, changing the porosity and permeability of the PM. The PM produced exhibited 27% lower porosity and 55% lower permeability than the traditional raster filling PM with similar pore widths. These unique characteristics open up the field for applications of PM obtained through AM.
期刊介绍:
-Publishes original research on physical, chemical, and biological aspects of transport in porous media-
Papers on porous media research may originate in various areas of physics, chemistry, biology, natural or materials science, and engineering (chemical, civil, agricultural, petroleum, environmental, electrical, and mechanical engineering)-
Emphasizes theory, (numerical) modelling, laboratory work, and non-routine applications-
Publishes work of a fundamental nature, of interest to a wide readership, that provides novel insight into porous media processes-
Expanded in 2007 from 12 to 15 issues per year.
Transport in Porous Media publishes original research on physical and chemical aspects of transport phenomena in rigid and deformable porous media. These phenomena, occurring in single and multiphase flow in porous domains, can be governed by extensive quantities such as mass of a fluid phase, mass of component of a phase, momentum, or energy. Moreover, porous medium deformations can be induced by the transport phenomena, by chemical and electro-chemical activities such as swelling, or by external loading through forces and displacements. These porous media phenomena may be studied by researchers from various areas of physics, chemistry, biology, natural or materials science, and engineering (chemical, civil, agricultural, petroleum, environmental, electrical, and mechanical engineering).