Effects of wind shear and thrust coefficient on the induction zone of a porous disk: A wind tunnel study

Neglecting the velocity reduction in the induction zone of wind turbines can lead to overestimates of power production predictions, and, thus, of the annual energy production for a wind farm. An experimental study on the induction zone associated with wind turbine operations is performed in the boundary‐layer test section of the BLAST wind tunnel at UT Dallas using stereo particle image velocimetry. This experiment provides a detailed quantification of the wind speed decrease associated with the induction zone for two different incoming flows, namely, uniform flow and boundary layer flow. Operations of wind turbines in different regions of the power curve are modeled in the wind tunnel environment with two porous disks with a solidity of 50.4% and 32.3%, which correspond to thrust coefficients of 0.71 and 0.63, respectively. The porous disks are designed to approximate the wake velocity profiles previously measured for utility‐scale wind turbines through scanning wind LiDARs. The results show that the streamwise velocity at one rotor diameter upwind of both disks decreases 1% more for the boundary layer flow than for the uniform flow. Further, the effect of shear in front of the disk with a higher thrust coefficient can be observed until 1.75 rotor diameter upwind of the disk, whereas for the disk with a lower thrust coefficient, the effect of shear becomes negligible at 1.25 rotor diameter upwind. It is found that at one rotor diameter upwind, for both incoming flows, the disk having a higher thrust coefficient has 2% more velocity reduction than the lower‐thrust‐coefficient disk. The results suggest that the variability in wind shear and rotor thrust coefficient, which is encountered during typical operations of wind turbines, should be considered for the development of improved models for predictions of the rotor induction zone, the respective cumulative effects in the presence of multiple turbines, namely, wind farm blockage, and more accurate predictions of wind farm power capture.