J. S. Valente, H. Armedáriz-Herrera, R. Quintana-Solórzano, M. Aouine, A. Malchere, L. Roiban and J. M. M. Millet
{"title":"利用 HAADF-STEM 研究用于乙烷氧化脱氢的超高效缺陷 MoVSbO 催化剂,并利用环境电子显微镜和层析成像技术研究其热演化情况","authors":"J. S. Valente, H. Armedáriz-Herrera, R. Quintana-Solórzano, M. Aouine, A. Malchere, L. Roiban and J. M. M. Millet","doi":"10.1039/D4CY00499J","DOIUrl":null,"url":null,"abstract":"<p >Scanning transmission electron microscopy (STEM) and <em>in situ</em> electron tomography (ET) is used to characterize the structure and morphology of a M1 phase based MoVSbO oxide catalyst. The catalyst, prepared through a new method involving the controlled combustion of an amino–organic compounds added as a structuring agent, has recently been shown to be very efficient in the oxidative dehydrogenation of ethane. The study shows that the M1 active phase has a specific morphology consisting of short nanorods particles with rounded cross-section and internal and external pores similarly shaped. Such a morphology contributes to several planes on the lateral facets of the nanorods and on the wall of the external pores exposing the sites commonly accepted as the catalytic active sites. While some of these planes, <em>i.e.</em>, like {120} and {210}, are already identified as generating active sites, this study proposes that additional planes, namely, {130} and {110} are formed. The evolution of the morphology with the thermal treatments of the catalysts is followed <em>in situ</em>. This study indicates that the nanorods are already shaped and porous after the hydrothermal synthesis step and drying, while the heat-treatments under O<small><sub>2</sub></small> and N<small><sub>2</sub></small> increase both the internal and external porosity of the nanorods. This study also highlights that there is an optimal heat treatment beyond which the texture of the catalyst evolves detrimentally.</p>","PeriodicalId":66,"journal":{"name":"Catalysis Science & Technology","volume":null,"pages":null},"PeriodicalIF":4.4000,"publicationDate":"2024-06-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Study of super-efficient defective MoVSbO catalysts used for ethane oxidative dehydrogenation by HAADF-STEM and of their thermal evolution by environmental electron microscopy and tomography†\",\"authors\":\"J. S. Valente, H. Armedáriz-Herrera, R. Quintana-Solórzano, M. Aouine, A. Malchere, L. Roiban and J. M. M. Millet\",\"doi\":\"10.1039/D4CY00499J\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p >Scanning transmission electron microscopy (STEM) and <em>in situ</em> electron tomography (ET) is used to characterize the structure and morphology of a M1 phase based MoVSbO oxide catalyst. The catalyst, prepared through a new method involving the controlled combustion of an amino–organic compounds added as a structuring agent, has recently been shown to be very efficient in the oxidative dehydrogenation of ethane. The study shows that the M1 active phase has a specific morphology consisting of short nanorods particles with rounded cross-section and internal and external pores similarly shaped. Such a morphology contributes to several planes on the lateral facets of the nanorods and on the wall of the external pores exposing the sites commonly accepted as the catalytic active sites. While some of these planes, <em>i.e.</em>, like {120} and {210}, are already identified as generating active sites, this study proposes that additional planes, namely, {130} and {110} are formed. The evolution of the morphology with the thermal treatments of the catalysts is followed <em>in situ</em>. This study indicates that the nanorods are already shaped and porous after the hydrothermal synthesis step and drying, while the heat-treatments under O<small><sub>2</sub></small> and N<small><sub>2</sub></small> increase both the internal and external porosity of the nanorods. This study also highlights that there is an optimal heat treatment beyond which the texture of the catalyst evolves detrimentally.</p>\",\"PeriodicalId\":66,\"journal\":{\"name\":\"Catalysis Science & Technology\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.4000,\"publicationDate\":\"2024-06-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Catalysis Science & Technology\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://pubs.rsc.org/en/content/articlelanding/2024/cy/d4cy00499j\",\"RegionNum\":3,\"RegionCategory\":\"化学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Catalysis Science & Technology","FirstCategoryId":"92","ListUrlMain":"https://pubs.rsc.org/en/content/articlelanding/2024/cy/d4cy00499j","RegionNum":3,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
Study of super-efficient defective MoVSbO catalysts used for ethane oxidative dehydrogenation by HAADF-STEM and of their thermal evolution by environmental electron microscopy and tomography†
Scanning transmission electron microscopy (STEM) and in situ electron tomography (ET) is used to characterize the structure and morphology of a M1 phase based MoVSbO oxide catalyst. The catalyst, prepared through a new method involving the controlled combustion of an amino–organic compounds added as a structuring agent, has recently been shown to be very efficient in the oxidative dehydrogenation of ethane. The study shows that the M1 active phase has a specific morphology consisting of short nanorods particles with rounded cross-section and internal and external pores similarly shaped. Such a morphology contributes to several planes on the lateral facets of the nanorods and on the wall of the external pores exposing the sites commonly accepted as the catalytic active sites. While some of these planes, i.e., like {120} and {210}, are already identified as generating active sites, this study proposes that additional planes, namely, {130} and {110} are formed. The evolution of the morphology with the thermal treatments of the catalysts is followed in situ. This study indicates that the nanorods are already shaped and porous after the hydrothermal synthesis step and drying, while the heat-treatments under O2 and N2 increase both the internal and external porosity of the nanorods. This study also highlights that there is an optimal heat treatment beyond which the texture of the catalyst evolves detrimentally.
期刊介绍:
A multidisciplinary journal focusing on cutting edge research across all fundamental science and technological aspects of catalysis.
Editor-in-chief: Bert Weckhuysen
Impact factor: 5.0
Time to first decision (peer reviewed only): 31 days